Return to README_TESTS CVS log

Up to [local] / trango / Net-Telnet-Trango / t

Annotation of trango/Net-Telnet-Trango/t/README_TESTS, Revision 1.1

1.1     ! andrew      1: For the network tests, there needs to be some hardware setup to make them pass.
        !             2: 
        !             3: The hardware that these tests should be run against should not be in 
        !             4: production.  These tests may disrupt normal functioning of the hardware.
        !             5: 
        !             6: There are three types of tests, each with different requirements.  AP Tests, 
        !             7: SU Tests and Association Tests.  
        !             8: 
        !             9: The configuration is read from a tests.cfg file in the t directory.  This
        !            10: file is generated by Build.PL, but you can create or modify it yourself.
        !            11: This file is a plain text file set up as key<tab>value. 
        !            12: 
        !            13: AP Tests:
        !            14: 
        !            15: These tests run on an AP.  They require that you have an AP that is set up
        !            16: and accessible through telnet.  
        !            17: 
        !            18: It uses two fields from the config file:
        !            19:     AP:        the IP address of the AP
        !            20:     AP_PASSWD: the password to login to the AP
        !            21: 
        !            22: There are also a few subtests that can be run, these involve adding and 
        !            23: removing things from the SUDB.  Generally they are used with the Association 
        !            24: Tests, but they can be tested if you provide additional information.
        !            25: 
        !            26: The fields used for these tests are as follow:
        !            27:     SU_ID:  The SUID of the SU
        !            28:     SU_MAC: The MAC address (all 12 digits, no spaces or punctuation)
        !            29: 
        !            30: 
        !            31: SU Tests:
        !            32: 
        !            33: These tests run on an SU.  They require that you have an SU that is set up
        !            34: and accessible through telnet.  
        !            35: 
        !            36: It uses two fields from the config file:
        !            37:     SU:        the IP address of the SU
        !            38:     SU_PASSWD: the password to login to the SU
        !            39: 
        !            40: 
        !            41: Association Tests:
        !            42: 
        !            43: These tests require everything above is set up, and the SU should be set up 
        !            44: so that when you add an entry to the APs SUDB it will associate.  
        !            45: 
        !            46: The tests will change the su password and su ipconfig, so the SU IP should 
        !            47: be in the same subnet as the AP IP.  
        !            48: 
        !            49: $RedRiver$