===================================================================
RCS file: /cvs/trango/Net-Telnet-Trango/scripts/update_trango.pl,v
retrieving revision 1.2
retrieving revision 1.29
diff -u -r1.2 -r1.29
--- trango/Net-Telnet-Trango/scripts/update_trango.pl	2005/11/16 05:26:37	1.2
+++ trango/Net-Telnet-Trango/scripts/update_trango.pl	2007/02/05 16:37:20	1.29
@@ -1,196 +1,439 @@
-#!/usr/bin/perl
-# $RedRiver: update_trango.pl,v 1.1 2005/11/16 03:28:42 andrew Exp $
-########################################################################
-# update_trango.pl *** Updates trango foxes with a new firmware
-# 
-# 2005.11.15 #*#*# andrew fresh <andrew@mad-techies.org>
-########################################################################
-use strict;
-use warnings;
-
-use Net::Telnet;
-use Net::TFTP;
-use YAML;
-
-my @Foxes = (
-  '10.100.3.8',
-#  '10.100.3.11',
-#  '10.100.3.12',
-#  '10.100.3.13',
-);
-
-my $password = 'password';
-
-my $new_file  = 'fsu53_2p0a2H0003D05101403.s19';
-my $new_ver   = 'FSU 1p06H0003D04111001';
-my $new_cksum = 'x1D28DCC4';
-
-my $max_tries = 3;
-
-
-
-
-
-
-foreach my $fox (@Foxes) {
-  print "getting temp from Fox: $fox\n";
-  ## Connect and login.
-  my $host = new Net::Telnet (Timeout => 5,
-                              Prompt => '/#> *$/');
-  $host->open($fox);
-  $host->dump_log('dump.log');
-
-  ## Login to remote host.
-  $host->waitfor(
-    -match => '/password: ?$/i',
-    -errmode => "return",
-  ) or die "problem connecting to host ($fox): ", $host->lastline;
-  $host->print($password);
-  $host->waitfor(
-    -match => $host->prompt,
-    -errmode => "return",
-  ) or die "login ($fox) failed: ", $host->lastline;
-  
-
-  ## Send commands
-  if ( upload($host, $new_file) ) {
-    $host->send('reboot');
-  } else {
-    $host->send('exit');
-  }
-  $host->close;
-}
-
-sub upload
-{
-  my $host = shift;
-  my $file = shift;
-  my $ver = get_ver($host);
-
-  if (
-    $ver->{'Firmware Version'} eq $new_ver && 
-    $ver->{'Checksum'}         eq $new_cksum
-  ) {
-    print "Already updated!";
-    return 1;
-  }
-
-  my $try = 0;
-  while (1) {
-    $try++;
-
-    enable_tftpd($host) || die "Couldn't enable tftpd";
-
-    # use tftp to push the file up
-
-    # waitfor some sort of output
-    # make sure it says 'Success.' otherwise error
-    
-    my $results = check_tftpd($host);
-    # check the 'File Length' against ???
-
-    # 'updateflash mainimage $old_cksum $new_cksum'
-    # OR
-    # 'save mainimage [current firmware checksum] [new firmware checksum]'
-    # waitfor a prompt, look at the end of the output for 'Success.' otherwise
-    # error.
-    # decode_lines to get 'Checksum' to see if it matches $new_cksum
-    
-    $ver = get_ver($host);
-    # check versions
-    
-
-    if ($try >= $max_tries) {
-      warn "Couldn't update in $max_tries tries!";
-      return undef;
-    }
-  }
-}
-
-sub get_ver
-{
-  my $host = shift;
-  return cmd($host, 'ver');
-}
-
-sub enable_tftpd
-{
-  my $host = shift;
-
-  my $vals = cmd($host, 'tftpd on');
-
-  if ($vals->{'Tftpd'} eq 'listen') {
-    return 1;
-  } else {
-    return undef;
-  }
-}
-
-sub check_tftpd
-{
-  my $host = shift;
-  return cmd($host, 'tftpd');
-}
-
-sub cmd
-{
-  my $host   = shift;
-  my $string = shift;
-
-  my @lines = $host->cmd($string);
-
-  my $vals = decode_lines(@lines);
-  return $vals;
-}
-
-sub decode_lines
-{
-  ### XXX ver has 2 Checksums.  one for FPGA and one for Firmware.  DOH!
-  my @lines = @_;
-
-  my %conf;
-
-  my $key = '';
-  my $val = '';
-  my $in_key = 0;
-  my $in_val = 0;
-
-  foreach my $line (@lines) {
-    my @chars = split //, $line;
-
-    foreach my $c (@chars) {
-      next if $c eq "\r";
-      next if $c eq "\n";
-
-      if ($c eq '[') {
-        $in_key = 1;
-        $in_val = 0;
-        if ($key) {
-          $val =~ s/\s+$//;
-          $conf{$key} = $val;
-          $key = '';
-          $val = '';
-        }
-
-      } elsif ($c eq ']') {
-        $in_val = 1;
-        $in_key = 0;
-        $c = shift @chars;
-
-      } elsif ($in_key) {
-        $key .= $c;
-
-      } elsif ($in_val) {
-        $val .= $c;
-      }
-    }
-  }
-  print Dump \%conf;
-
-  if (%conf) {
-    return \%conf;
-  } else {
-    return \@lines;
-  }
-}
-
+#!/usr/bin/perl
+# $RedRiver: update_trango.pl,v 1.28 2007/02/02 22:37:24 andrew Exp $
+########################################################################
+# update_trango.pl *** Updates trango hosts with a new firmware
+# 
+# 2005.11.15 #*#*# andrew fresh <andrew@mad-techies.org>
+########################################################################
+use strict;
+use warnings;
+
+use YAML qw/ LoadFile /;
+use Net::TFTP;
+use lib '.';
+use Net::Telnet::Trango;
+use RedRiver::Wireless;
+
+my $config_file = shift || 'update_trango.yaml';
+my $max_tries = 3;
+
+my $l = Mylogger->new( { log_prefix => 'UT' } );
+
+$l->sp("Reading config file '$config_file'");
+my $conf = LoadFile($config_file);
+
+my $hosts;
+if (@ARGV) {
+  @{ $hosts } = map { { name => $_, group => 'Trango-Client' } } @ARGV
+} else {
+  $l->sp("Reading hosts");
+  $hosts = RedRiver::Wireless::Read_Hosts();
+}
+
+#@{ $hosts } = grep { $_->{name} eq '10.100.7.2' } @{ $hosts };
+
+my $global_tries = $max_tries * 2;
+while ($global_tries > 0) { 
+  $global_tries--;
+  my $processed = 0;
+
+
+foreach my $host (@{ $hosts }) {
+  next if $host->{group} !~ /^Trango/;
+
+  if (! exists $host->{retry}) {
+    $host->{tries} = 0;
+    $host->{retry} = 1;
+  }
+
+  if ($host->{tries} >= $max_tries) {
+    $host->{retry} = 0;
+  }
+
+  if ($host->{retry} <= 0) {
+    next;
+  }
+
+  $host->{tries}++;
+  $processed++;
+
+  $l->sp("");
+  $l->sp("Checking: $host->{name} (try $host->{tries})");
+  my $needs_reboot = 0;
+
+  ## Connect and login.
+  my $t = new Net::Telnet::Trango (
+    Timeout => 5,
+    Errmode => 'return',
+  ) or die "Couldn't make new connection: $!";
+  $l->p("Connecting to $host->{name}");
+  unless ( $t->open($host->{name}) ) {
+    $l->sp("Error connecting: $!");
+    next;
+  }
+
+  my $password = $host->{Telnet_Password} || $conf->{general}->{password};
+
+  # XXX I am not sure this is the best way to check if we should look for
+  # XXX associated stations.
+  if ($host->{group} !~ /Client$/) {
+    $l->p("Logging in");
+    $t->login($password);
+    unless ($t->logged_in) {
+      $l->p('Failed!');
+      $t->close;
+      next;
+    }
+
+    $l->sp("Getting sudb");
+    my $sudb = $t->sudb_view;
+    if ($sudb) {
+      $t->su_password($password);
+      foreach my $su (@{ $sudb }) {
+        $l->p("Getting su info $su->{suid}");
+        my $su_info = $t->su_info( $su->{suid} ); 
+        if ($su_info->{ip}) {
+          if (grep { $_->{name} eq $su_info->{'ip'} } @{ $hosts }) {
+            $l->p("Already have $su_info->{ip}");
+            next;
+          }
+          $l->sp("Adding host $su_info->{ip}");
+          my $new_host = {
+            Telnet_Password => $host->{Telnet_Password},
+            group   => $host->{group} . '-Client',
+            name    => $su_info->{ip},
+            remarks => $su_info->{remarks},
+          };
+          push @{ $hosts }, $new_host;
+        } else {
+          $l->sp("Couldn't get su info for $su->{suid}");
+          if ($su_info->{ERR}) {
+            $l->sp("ERR: $su_info->{ERR}");
+          }
+        }
+      }
+    }
+  } 
+
+  foreach my $firmware_type ('Firmware', 'FPGA') {
+
+    if (! exists $conf->{$firmware_type}) {
+      $l->s("No configs for '$firmware_type'");
+      $t->close;
+      next;
+    }
+
+    my $host_type = $t->host_type;
+    if ($firmware_type eq 'FPGA') {
+      $host_type =~ s/\s.*$//;
+    }
+
+    if (! exists $conf->{$firmware_type}->{$host_type}) {
+      $l->sp("No '$firmware_type' config for type $host_type");
+      $t->close;
+      next;
+    }
+
+    if ($firmware_type eq 'Firmware' && 
+      $t->firmware_version eq 
+      $conf->{$firmware_type}->{$host_type}->{ver}
+    ) {
+      $l->sp("Firmware already up to date");
+      next;
+    }
+
+    if (! $t->logged_in) {
+      $l->p("Logging in");
+      $t->login($password);
+      unless ($t->logged_in) {
+        $l->p('Failed!');
+        $t->close;
+        next;
+      }
+    }
+
+    foreach my $k (keys %{ $conf->{general} }) {
+      $conf->{$firmware_type}->{$host_type}->{$k} ||= $conf->{general}->{$k};
+    }
+    $conf->{$firmware_type}->{$host_type}->{firmware_type} ||= $firmware_type;
+    $conf->{$firmware_type}->{$host_type}->{type} = $host_type;
+
+    $l->sp("$host_type $firmware_type");
+    ## Send commands
+    my $rc = upload($t, $conf->{$firmware_type}->{$host_type});
+    if ($rc) {
+      $l->sp("Successfull!");
+      $host->{retry}--;
+      $needs_reboot = 1;
+    } elsif (defined $rc) {
+      $l->sp("Already up to date");
+      $host->{retry}--;
+    } else {
+      $l->sp("Failed");
+      $t->bye;
+      next;
+    }
+  
+  }
+
+  if ($needs_reboot) {
+    $l->sp("Rebooting $host->{name}");
+    $t->reboot;
+  } else {
+    $l->sp("Bye $host->{name}");
+    $t->bye();
+  }
+}
+
+  if (! $processed) {
+    $l->sp("");
+    $l->sp("Finished.  No more hosts.");
+    last;
+  }
+}
+
+sub upload
+{
+  my $t    = shift;
+  my $conf = shift;
+
+  my $file = $conf->{firmware_path} . '/' . $conf->{file_name};
+
+  my $fw_type = $conf->{firmware_type};
+
+  my $ver = $t->ver;
+
+  if (! (
+    $ver->{$fw_type . ' Version'}  &&
+    $ver->{$fw_type . ' Checksum'} 
+  )) {
+    $l->sp("Error getting current version numbers");
+    return;
+  }
+
+  if (
+    $ver->{$fw_type . ' Version'}  eq $conf->{'ver'} && 
+    $ver->{$fw_type . ' Checksum'} eq $conf->{'cksum'}
+  ) {
+    return 0;
+  }
+
+  $l->sp("Updating $fw_type");
+  $l->sp("Config information:");
+  $l->sp("  Hardware Type: $conf->{'type'}");
+  $l->sp("  File Name:     $conf->{'file_name'}");
+  $l->sp("  File Size:     $conf->{'file_size'}");
+  $l->sp("  File Checksum: $conf->{'file_cksum'}");
+  $l->sp("  Conf Version:  $conf->{'ver'}");
+  $l->sp("  Cur  Version:  $ver->{$fw_type . ' Version'}");
+  $l->sp("  Conf Checksum: $conf->{'cksum'}");
+  $l->sp("  Cur  Checksum: $ver->{$fw_type . ' Checksum'}");
+
+  my $try = 0;
+  while (1) {
+    if ($try >= $max_tries) {
+      $l->sp("Couldn't update in $max_tries tries!");
+      return;
+    }
+    $try++;
+
+    $l->p("Enabling TFTPd");
+    unless ($t->enable_tftpd) {
+      $l->sp("Couldn't enable tftpd");
+      next;
+    }
+
+    $l->p("Uploading file ($conf->{file_name})");
+    # use tftp to push the file up
+    my $tftp = Net::TFTP->new($t->Host, Mode => 'octet');
+
+    unless ($tftp->put($file, $file)) {
+      $l->sp("Error uploading: " . $tftp->error);
+      next;
+    }
+
+    $l->p("Checking upload ($conf->{'file_cksum'})");
+    my $results = $t->tftpd;
+    # check the 'File Length' against ???
+    if (! (
+      $results->{'File Checksum'} &&
+      $results->{'File Length'}   &&
+      $results->{'File Name'}
+    )) {
+      $l->sp("Unable to get results of upload");
+      next;
+    }
+    if ( $results->{'File Checksum'} ne $conf->{'file_cksum'}) {
+      $l->sp(
+        "File checksum (" . $results->{'File Checksum'} .
+        ") does not match config file (" . $conf->{'file_cksum'} . ")!"
+      );
+      next;
+    } 
+    $l->p("File checksum matches . . . ");
+
+    if ($results->{'File Length'}   !~ /^$conf->{'file_size'} bytes/) {
+      $l->sp(
+        "File length (" . $results->{'File Length'} .
+        ") does not match config file (" . $conf->{'file_size'} . " bytes)!"
+      );
+      next;
+    }
+    $l->p("File length matches . . . ");
+
+    if ( uc($results->{'File Name'}) ne uc($file) ) {
+      $l->sp(
+        "File name (" . $results->{'File Name'} .
+        ") does not match config file (" . $file . ")!"
+      );
+      next;
+    }
+    $l->p("File name matches . . . ");
+
+    my $image_type = 'mainimage';
+    if ($fw_type eq 'FPGA') {
+      $image_type = 'fpgaimage';
+    }
+    $l->p("Updating $image_type (new checksum '$conf->{'cksum'}')");
+    unless ($results = $t->updateflash(
+      args => $image_type . ' ' . $ver->{$fw_type . ' Checksum'} . 
+              ' '          . $conf->{'cksum'},
+      Timeout => 90,
+    ) ) {
+      $l->sp("Couldn't update flash: $!");
+      next;
+    }
+
+    unless (
+      defined $results->{'Checksum'} && 
+      $results->{'Checksum'} eq $conf->{'cksum'}
+    ) {
+      $l->sp("Saved checksum " . $results->{'Checksum'} . " does not match config file " .  $conf->{'cksum'} . "!");
+      next;
+    }
+
+    $l->p("$fw_type saved checksum matches . . . ");
+    
+    return 1;
+  }
+}
+
+package Mylogger;
+
+use Fcntl ':flock'; # import LOCK_* constants
+#use YAML;
+use constant LOG_PRINT => 128;
+use constant LOG_SAVE  =>  64;
+
+DESTROY {
+  my $self = shift;
+  if ($self->{'MYLOG'}) {
+    $self->p("Closing log ($self->{'log_path'}/$self->{'log_file'})");
+    close $self->{'MYLOG'};
+  }
+}
+
+sub new {
+  my $package = shift;
+  my $self = shift || {};
+
+  $self->{'base_path'}  ||= '.';
+  $self->{'log_path'}   ||= $self->{'base_path'};
+  $self->{'log_prefix'} ||= 'LOG';
+  $self->{'log_file'}   ||= GetLogName(
+    $self->{'log_prefix'}, 
+    $self->{'log_path'}
+  );
+  bless $self, $package;
+}
+
+sub s
+{
+  my $self = shift;
+  my $m = shift;
+  return $self->mylog($m, LOG_SAVE);
+}
+
+sub p
+{
+  my $self = shift;
+  my $m = shift;
+  return $self->mylog($m, LOG_PRINT);
+}
+
+sub sp
+{
+  my $self = shift;
+  my $m = shift;
+  return $self->mylog($m, LOG_SAVE | LOG_PRINT);
+}
+
+sub mylog
+{
+  my $self = shift;
+
+  my $thing = shift;
+  chomp $thing;
+
+  my $which = shift;
+
+  my $MYLOG;
+  if ($which & LOG_PRINT) {
+    print $thing, "\n";
+  }
+
+  if ($which & LOG_SAVE) {
+    if ($self->{'MYLOG'}) {
+      $MYLOG = $self->{'MYLOG'};
+    } else {
+      unless ($MYLOG) {
+        open ($MYLOG, '>>', $self->{'log_path'} . '/' . $self->{'log_file'}) 
+          or die "Couldn't open logfile!\n";
+        my $ofh = select $MYLOG;
+        $|=1;
+        select $ofh;
+        $self->{'MYLOG'} = $MYLOG;
+
+        $self->p("Opened log ($self->{'log_path'}/$self->{'log_file'})");
+      }
+    }
+    flock($MYLOG, LOCK_EX);
+    print $MYLOG (scalar gmtime), "\t", $thing, "\n" 
+      or die "Couldn't print to MYLOG: $!";
+    flock($MYLOG, LOCK_UN);
+  }
+}
+
+sub GetLogName
+{
+  my $prefix  = shift || die "Invalid prefix passed for log";
+
+  my $logdate = GetLogDate();
+  my $logver  = 0;
+  my $logname;
+
+  do {
+    $logname = $prefix . $logdate . sprintf("%02d", $logver) . '.log';
+    $logver++;
+  } until (not -e $logname);
+
+  return $logname;
+}
+
+sub GetLogDate
+{
+  my ($sec,$min,$hour,$mday,$mon,$year,,,) = localtime();
+
+  $mon++;
+  $year += 1900;
+
+  if ($min  < 10) { $min  = "0$min"  }
+  if ($sec  < 10) { $sec  = "0$sec"  }
+  if ($hour < 10) { $hour = "0$hour" }
+  if ($mday < 10) { $mday = "0$mday" }
+  if ($mon  < 10) { $mon  = "0$mon"  }
+
+  my $time = $year . $mon . $mday;
+
+  return $time;
+}