[BACK]Return to update_openbsd CVS log [TXT][DIR] Up to [local] / openbsd / update_openbsd

Diff for /openbsd/update_openbsd/update_openbsd between version 1.3 and 1.62

version 1.3, 2008/08/12 23:42:09 version 1.62, 2014/01/23 02:40:07
Line 1 
Line 1 
 #!/bin/sh  #!/bin/sh
 # $RedRiver: update_openbsd,v 1.2 2008/08/12 22:07:05 andrew Exp $  # $AFresh1: update_openbsd,v 1.61 2014/01/23 02:30:02 andrew Exp $
   #
   # Copyright (c) 2012 Andrew Fresh <andrew@afresh1.com>
   #
   # Permission to use, copy, modify, and distribute this software for any
   # purpose with or without fee is hereby granted, provided that the above
   # copyright notice and this permission notice appear in all copies.
   #
   # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
   # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
   # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
   # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
   # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
   #
   
 SYSMERGE=/usr/sbin/sysmerge  
 MIRROR=ftp://ftp.openbsd.org/pub/OpenBSD  
 FTP_CMD='ftp -V'  
 DESTDIR=/  
   
 if [ -e /etc/update_openbsd.conf ]; then  
     . /etc/update_openbsd.conf  
 fi  
   
 if [ -e ${HOME}/.update_openbsdrc ]; then  
     . ${HOME}/.update_openbsdrc  
 fi  
   
 installed_sets() {  installed_sets() {
     misc=/usr/share/doc/README      local misc=/usr/share/doc/README
     man=/usr/share/man/cat1/intro.0      local man=/usr/share/man/cat1/intro.0
     comp=/usr/bin/cc      local comp=/usr/bin/cc
     game=/usr/games/      local game=/usr/games/
     xbase=/usr/X11R6/      local xbase=/usr/X11R6/
     xetc=/etc/X11/xinit/xinitrc      local xetc=/etc/X11/xinit/xinitrc
     xfont=/usr/X11R6/lib/X11/fonts      local xfont=/usr/X11R6/lib/X11/fonts
     xserv=/usr/X11R6/bin/X      local xserv=/usr/X11R6/bin/X
     xshare=/usr/X11R6/bin/startx      local xshare=/usr/X11R6/bin/startx
   
     echo base      local _c _d _e
     echo etc      echo -n base
       echo -n ' etc'
     for _d in misc man comp game xbase xetc xfont xserv xshare; do      for _d in misc man comp game xbase xetc xfont xserv xshare; do
         eval _e=\$${_d}          eval _e=\$${_d}
         _c=`ls $_e 2> /dev/null | wc -l`          _c=`ls $_e 2> /dev/null | wc -l`
         #echo $_c $_d $_e          #echo $_c $_d $_e
         if [ $_c -ne 0 ]; then          if [ $_c -ne 0 ]; then
             echo $_d              echo -n " $_d"
         fi          fi
     done      done
   
       sendmail -d0.1 --badoption </dev/null 2>/dev/null | grep -q SASL
       if [ $? == 0 ]; then
           echo -n ' sendmail-smtp_auth'
       fi
 }  }
   
   kernel_file_version() {
       echo exit | config -e $1 | grep -A1 ^OpenBSD
       #what $1 | sed -ne 's/[[:blank:]]\{1,\}//p'
   }
   
   version_in() {
           local _proto=${FTP%%://*}
           local _file
   
           if [ X"ftp" == X"${_proto}" ]; then
               local _list=`echo "ls base*.tgz" | ${FTP_CMD} ${FTP}/`
               _file=`echo ${_list} | awk '/base[0-9][0-9].tgz/ { print $9 }'`
   
           elif [ X"http" == X"${_proto}" ]; then
               local _list=`${FTP_CMD} -V -o - ${FTP}/`
               _file=`echo ${_list} | awk '/[^x]base[0-9][0-9]*\.tgz/ {
                       sub("^.*base","base");
                       sub("\.tgz.*",".tgz");
                       print $0;
                   }'`
   
           elif [ X"scp" == X"${_proto}" ]; then
               echo SCP is not yet supported >&2
               return 2
   
           else
               echo Unsupported FTP ${FTP} >&2
               return 2
   
           fi
   
           local _v=${_file##*base}
           _v=${_v%.tgz*}
           echo $_v
   }
   
 set_version() {  set_version() {
     CUR_VER=`uname -r`      CUR_VER=`uname -r`
     NEW_VER=`dc -e "$CUR_VER 0.1 + p"`      NEW_VER=`dc -e "$CUR_VER 0.1 + p"`
       FILE_VER=""
       FTP=""
   
     if [ -d $NEW_VER ]; then      local _cv=`echo $CUR_VER | sed -e 's/\.//'`
         DIR=$NEW_VER      local _nv=`echo $NEW_VER | sed -e 's/\.//'`
     fi      local _v
   
     if [ -d $CUR_VER ]; then      if [ X"No" != X"$FORCE_DIR" -a -d $FORCE_DIR ]; then
           _dir=$FORCE_DIR
           if [ -e ${_dir}/base${_nv}.tgz ]; then
               _v=$_nv
           elif [ -e ${_dir}/base${_cv}.tgz ]; then
               NEW_VER=$CUR_VER
               _v=$_cv
           fi
   
       elif [ -d $CUR_VER ]; then
           _dir=$CUR_VER
         NEW_VER=$CUR_VER          NEW_VER=$CUR_VER
         DIR=$NEW_VER          if [ -e ${_dir}/base${_cv}.tgz ]; then
     fi              _v=$_cv
           fi
   
     if [ X"" != X"$FORCE_DIR" ]; then      elif [ -d $NEW_VER ]; then
         if [ -d $FORCE_DIR ]; then          _dir=$NEW_VER
             DIR=$FORCE_DIR          if [ -e ${_dir}/base${_nv}.tgz ]; then
               _v=$_nv
             _cv=`echo $CUR_VER | sed -e 's/\.//'`  
             if [ -e $DIR/base${_cv}.tgz ]; then  
                 NEW_VER=$CUR_VER  
             fi  
         fi          fi
   
     fi      fi
   
     if [ X"" == X"$DIR" ]; then      if [ X"" != X"${MIRROR}" -a X"" == X"${_v}" ]; then
         FTP=${MIRROR}/${NEW_VER}/`machine`          if [ X"No" == X"${FORCE_DIR}" ]; then
               _dir=${NEW_VER}
           else
               _dir=${FORCE_DIR}
           fi
           FTP=${MIRROR}/${_dir}/`machine`
   
         #echo "ls\nquit\n" | ftp $MIRROR | grep "$NEW_VER"          _v=`version_in`
         $FTP_CMD ${FTP}/MD5 > /dev/null  
   
         if [ -e MD5 ]; then          if [ X"" == X"${_v}" ]; then
             rm -f MD5              if [ X"No" != X"$FORCE_DIR" ]; then
         else                  echo No sets in forced [${FTP}] >&2
                   return 2
               fi
   
             NEW_VER=$CUR_VER              NEW_VER=$CUR_VER
               _dir=${NEW_VER}
               FTP=${MIRROR}/${_dir}/`machine`
   
               _v=`version_in`
         fi          fi
   
         if [ X"$FORCE_DIR" == X"" ]; then          if [ X"" == X"${_v}" ]; then
             DIR=$NEW_VER              echo No sets in [${FTP}] >&2
               return 2
           elif [ X"${_cv}" == X"${_v}" ]; then
               NEW_VER=$CUR_VER
           elif [ X"${_nv}" == X"${_v}" ]; then
               NEW_VER=$NEW_VER
         else          else
             DIR=$FORCE_DIR              echo Invalid version [$_v] >&2
               return 2
         fi          fi
   
         FTP=${MIRROR}/${DIR}/`machine`          if [ X"No" == X"$FORCE_DIR" ]; then
               _dir=$NEW_VER
           fi
   
     fi      fi
   
     if [ X"" != X"$RELEASEDIR" ]; then      if [ X"" == X"${_v}" ]; then
         DIR=$RELEASEDIR          echo ERROR: Unable to determine file version! >&2
           return 1
     fi      fi
   
     if [ -d $DIR ]; then      if [ X"" == X"$RELEASEDIR" ]; then
        cd $DIR          RELEASEDIR=`pwd`/$_dir
        RELEASEDIR=`pwd`  
     fi      fi
   
     _v=`echo $NEW_VER | sed -e 's/\.//'`      FILE_VER=$_v
       if [ X"" != X"${MIRROR}" ]; then
           FTP=${MIRROR}/${_dir}/`machine`
       fi
   
       BOOT_KERNEL=`( \
           echo bsd; \
           [ -e /boot.conf ] && sed -E '/^ *(set +image|boot) +/!d ; \
               s///; s/^.*://; s/ .*$//' /boot.conf \
       ) | tail -1`
       BOOT_KERNEL=`follow_symlink /$BOOT_KERNEL`
       BOOT_KERNEL="/${BOOT_KERNEL#/}"
   
       BOOT_KERNEL_VERSION=`kernel_file_version $BOOT_KERNEL`
   
       BOOTED_KERNEL_VERSION=`sysctl -n kern.version`
       NEW_KERNEL_VERSION=""
   
       # We want to default to what we had
       INSTALL_KERNELS="${BOOT_KERNEL#/}"
       # if the boot kernel was our specially named bsd.sp, we install from bsd
       if [ X"$INSTALL_KERNELS" == X"bsd.sp" ]; then
           INSTALL_KERNELS="bsd"
       fi
       # with a second option of an mp kernel if is is a likely candidate
       if [ X"$INSTALL_KERNELS" != X"bsd.mp" ]; then
           local _ncpu=$(sysctl -n hw.ncpufound)
           [ $_ncpu -gt 1 ] && INSTALL_KERNELS="$INSTALL_KERNELS bsd.mp"
       fi
       # or just bsd otherwise
       if [ X"${INSTALL_KERNELS% *}" != X"bsd" ]; then
           INSTALL_KERNELS="$INSTALL_KERNELS bsd"
       fi
       BOOT_KERNELS=$INSTALL_KERNELS
       INSTALL_KERNELS="$INSTALL_KERNELS bsd.rd"
 }  }
   
 get_sets() {  get_sets() {
       echo '==> GETTING SETS'
     if [ X"" == X"$FTP" ]; then      if [ X"" == X"$FTP" ]; then
         echo Error, no FTP site is set! >&2          echo ERROR: No FTP site set! >&2
         exit 1          return 1
     fi      fi
   
     if [ X"" == X"$RELEASEDIR" ]; then      mkdir -p ${RELEASEDIR}
         RELEASEDIR=$DIR  
     fi  
   
     mkdir -p $RELEASEDIR  
     cd $RELEASEDIR      cd $RELEASEDIR
     RELEASEDIR=`pwd`  
   
     for _b in /bsd* bsd bsd.mp bsd.rd; do      local _v=$FILE_VER
         if [ -e /${_b} -a ! -e ./${_b} ]; then  
             echo $FTP_CMD ${FTP}/${_b}      for _b in $INSTALL_KERNELS; do
           if [ ! -e ./${_b} ]; then
               echo "===> $FTP_CMD ${FTP}/${_b}"
             $FTP_CMD ${FTP}/${_b}              $FTP_CMD ${FTP}/${_b}
         fi          fi
     done      done
   
     for _s in `installed_sets`; do      for _s in $INSTALLED_SETS; do
         echo $FTP_CMD ${FTP}/${_s}${_v}.tgz          local _file=${_s}${_v}.tgz
         $FTP_CMD ${FTP}/${_s}${_v}.tgz          if [ ${_s} == sendmail-smtp_auth ]; then
               _file=${_s}.gz
           fi
   
           if [ ! -e ./${_file} ]; then
               echo "===> $FTP_CMD ${FTP}/${_file}"
               $FTP_CMD ${FTP}/${_file}
           fi
     done      done
   
     echo $FTP_CMD ${FTP}/MD5      local _type
     $FTP_CMD ${FTP}/MD5      local _ftp
     ls bsd* *.tgz > index      for _type in $CHECKSUM_TYPES; do
     grep -f index MD5 | md5 -c          [ -e $_type ] && break
           _ftp=`echo "$FTP" | sed -e 's,://[^/]*/,://ftp.openbsd.org/,'`
           echo "===> $FTP_CMD ${_ftp}/$_type"
           $FTP_CMD ${_ftp}/$_type
       done
   }
   
     if [ $? -ne 0 ]; then  follow_symlink () {
         echo !!! WARNING: MD5 does not match !!! >&2      local _file=$1
         exit 1      # This could go circular, but I dunno how to fix that.
       if [ -h $_file ]; then
           follow_symlink $( file $_file |
               grep 'symbolic link' |
               sed -e s/^.*\\\`// -e s/\\\'\$// )
       else
           echo $_file
     fi      fi
 }  }
   
 install_kernel() {  check_sum () {
     if [ X"$USER" != X"root" -a X"$SUDO" == X"" ]; then      local _type=$1
         echo ${0##*/} must be run as root or SUDO must be set! >&2      echo "==> CHECKING $_type SUMS"
         exit 1      cd $RELEASEDIR
   
       if [ ! -e $_type ]; then
           echo $_type File does not exist!
           return 1
     fi      fi
   
     if [ X"" == X"$RELEASEDIR" ]; then      local _nv=`echo $NEW_VER | sed -e 's/\.//'`
         echo "ERROR: no source for new kernels!" >&2      local _signify=`which signify 2>/dev/null`
         exit 1      local _keyfile=/etc/signify/${_nv}base.pub
       local _b _s
   
       (
           for _b in $INSTALL_KERNELS; do echo "($_b)"        ; done
           for _s in $INSTALLED_SETS;  do echo "($_s$_nv.tgz)"; done
       ) > index
   
   
       if [ -n "$_signify" -a "$_type" != "${_type%.sig}" ]; then
           echo "===> Checking signature";
           if [ ! -e $_keyfile ]; then
               echo "key [$_keyfile] does not exist, cannot check $_type" >&2
               return 2
           fi
           signify -V -e -p $_keyfile -x $_type -m - | grep -f index | sum -c -
     else      else
         cd $RELEASEDIR         grep -f index $_type | sum -c
     fi      fi
   
     if [ ! -e bsd ]; then      if [ $? -ne 0 ]; then
         echo "new bsd kernel does not exist!" >&2          echo ERROR: $_type does not match! >&2
         exit 1          return 1
     fi      fi
   }
   
     if [ -e /bsd.mp -a ! -e bsd.mp ]; then  check_sets() {
         echo "new bsd.mp kernel does not exist!" >&2      echo '==> CHECKING SETS'
         exit 1      cd $RELEASEDIR
   
       local _missing_sets
       local _v=$FILE_VER
   
       for _n in $INSTALL_KERNELS; do
           local _o=$_n
           [ X"bsd" == X"${_o}" -a -e /bsd.sp ] && _o=bsd.sp
           if [ -e /${_o} -a ! -e ./${_n} ]; then
               echo ${_o} does not exist
               _missing_sets=1
           fi
   
           if [ X"${BOOT_KERNEL}" == X"/${_o}" -a -e ./${_n} ]; then
               NEW_KERNEL_VERSION=`kernel_file_version ./${_n}`
           fi
       done
   
       if [ X"$NEW_KERNEL_VERSION" == X"" ]; then
           echo Missing replacement for boot kernel $BOOT_KERNEL >&2
           _missing_sets=1
     fi      fi
   
     if [ ! -e bsd.rd ]; then      for _s in $INSTALLED_SETS; do
         echo "new bsd.rd kernel does not exist!" >&2          local _file=${_s}${_v}.tgz
         exit 1          if [ ${_s} == sendmail-smtp_auth ]; then
               _file=${_s}.gz
           fi
           if [ ! -e ./${_file} ]; then
               echo ${_file} does not exist
               _missing_sets=1
           fi
       done
   
       if [ X"" == X"${_missing_sets}" ]; then
           echo '===> All OK'
     fi      fi
   
       local _type
       for _type in $CHECKSUM_TYPES; do
           if [ -e $_type ]; then
               check_sum $_type && break
               [ -z "$IGNORE_CHECKSUM_ERROR" ] && exit 1
           fi
       done
   
     if [ -e base${_v}.tgz ]; then      return 0
         echo Extracting new firmware from base${_v}.tgz  }
         $SUDO tar -C $DESTDIR -xzphf base${_v}.tgz "*etc/firmware/*"  
   
   install_kernels() {
       echo '==> INSTALLING KERNEL'
       if [ X"$USER" != X"root" -a X"$SUDO" == X"" ]; then
           echo ${0##*/} must be run as root or SUDO must be set! >&2
           exit 1
     fi      fi
   
     $SUDO rm -f /obsd      if [ X"" == X"$RELEASEDIR" ]; then
     $SUDO ln /bsd /obsd          echo ERROR: no source for new kernels! >&2
     if [ $? -ne 0 ]; then  
         echo "Error copying old kernel!"  
         exit 1          exit 1
     fi      fi
   
     for _b in bsd*; do      if [ X"$BOOT_KERNEL_VERSION" != X"$NEW_KERNEL_VERSION" ]; then
           echo "===> Backing up $BOOT_KERNEL to /obsd"
           $SUDO ln -f $BOOT_KERNEL /obsd
           if [ $? -ne 0 ]; then
               echo "Error copying old kernel!" >&2
               exit 1
           fi
       fi
   
       cd $RELEASEDIR
   
       for _b in $INSTALL_KERNELS; do
         $SUDO rm -f /nbsd          $SUDO rm -f /nbsd
           local _bd=$_b
           [ X"${_b}" == X"bsd" ] && _bd="bsd.sp"
   
         if [ X"$_b" == X"bsd" ]; then          local _is_boot=""
             echo Copying bsd to /bsd.sp          [ X"$BOOT_KERNEL" == X"/${_bd}" ] && _is_boot="# boot kernel"
             $SUDO cp bsd /nbsd && $SUDO mv /nbsd /bsd.sp  
             if [ $? -ne 0 ]; then          echo "===> Copying $_b to /$_bd $_is_boot"
                 echo "ERROR: Couldn't copy new SP kernel!" >&2          $SUDO cp ${_b} /nbsd && $SUDO mv /nbsd /${_bd}
                 exit 1          if [ $? -ne 0 ]; then
             fi              echo ERROR: Could not copy new $_bd kernel! >&2
         else              exit 1
             if [ -e /$_b ]; then  
                 echo Copying $_b to /  
                 $SUDO cp ${_b} /nbsd && $SUDO mv /nbsd /${_b}  
                 if [ $? -ne 0 ]; then  
                     echo "ERROR: Couldn't copy new $_b kernel!" >&2  
                     exit 1  
                 fi  
             fi  
         fi          fi
     done      done
   
       cd $OLDPWD
   
     if [ ! -h /bsd ]; then      if [ ! -h /bsd ]; then
         if [ -e /bsd.mp ]; then              cd /
             echo linking /bsd.mp to /bsd          for _b in $BOOT_KERNELS; do
             $SUDO ln -sf /bsd.mp /bsd              [ X"$_b" == X"bsd" ] && _b="bsd.sp"
         else              if [ -e $_b ]; then
             echo linking /bsd.sp to /bsd                  echo "===> symlinking $_b to /bsd"
             $SUDO ln -sf /bsd.sp /bsd                  $SUDO ln -sf $_b bsd
         fi                  if [ $? -ne 0 ]; then
         if [ $? -ne 0 ]; then                      echo ERROR: Could not symlink new kernel! >&2
             echo "ERROR: Couldn't symlink new kernel!" >&2                      exit 1
             exit 1                  fi
         fi                  break
               fi
           done
               cd $OLDPWD
     fi      fi
 }  }
   
 install_sets() {  install_sets() {
       echo '==> INSTALLING SETS'
     if [ X"$USER" != X"root" -a X"$SUDO" == X"" ]; then      if [ X"$USER" != X"root" -a X"$SUDO" == X"" ]; then
         echo ${0##*/} must be run as root or SUDO must be set! >&2          echo ${0##*/} must be run as root or SUDO must be set! >&2
         exit 1          exit 1
     fi      fi
   
     if [ X"" == X"$RELEASEDIR" ]; then      if [ X"" == X"$RELEASEDIR" ]; then
         echo "ERROR: no source for sets!" >&2          echo ERROR: no source for sets! >&2
         exit 1          exit 1
     else      else
         cd $RELEASEDIR          cd $RELEASEDIR
     fi      fi
   
     for _f in *${_v}.tgz; do      local _v=$FILE_VER
   
       local _sets=`ls *${_v}.tgz | grep -v ^base `
       for _f in ${_sets} base${_v}.tgz; do
         _path=$DESTDIR          _path=$DESTDIR
         if [ X"etc${_v}.tgz"  == X"$_f" \          if [ X"etc${_v}.tgz"  == X"$_f" \
             -o X"xetc${_v}.tgz" == X"$_f" ]; then              -o X"xetc${_v}.tgz" == X"$_f" ]; then
             if [ X"" != X"$SYSMERGE" ]; then              [ X"" != X"$SYSMERGE" ] && continue
                 continue  
             fi  
             _path=/var/tmp/temproot              _path=/var/tmp/temproot
         fi          fi
   
         echo Extracting $_f to $_path          echo "===> Extracting $_f to $_path"
         $SUDO mkdir -p $_path          $SUDO mkdir -p $_path
         $SUDO tar -C $_path -xzphf ${RELEASEDIR}/${_f}          $SUDO tar -C $_path -xzphf ${RELEASEDIR}/${_f}
         if [ $? -ne 0 ]; then          if [ $? -ne 0 ]; then
             echo "Error extracting ${_f}!" >&2              echo ERROR: Could not extract ${_f}! >&2
             exit 1              exit 1
         fi          fi
     done      done
   
     echo Extracted all sets.      echo '===> Extracted all sets.'
 }  }
   
   install_sendmail_smtp_auth() {
       if [ -e ${RELEASEDIR}/sendmail-smtp_auth.gz ]; then
           gzcat ${RELEASEDIR}/sendmail-smtp_auth.gz > \
               ${RELEASEDIR}/sendmail-smtp_auth
       fi
       if [ -e ${RELEASEDIR}/sendmail-smtp_auth ]; then
           if ! pkg_info -qe 'cyrus-sasl-*'; then
               $SUDO pkg_add -i cyrus-sasl
           fi
   
           $SUDO install -o root -g smmsp -m 2555 \
               ${RELEASEDIR}/sendmail-smtp_auth \
               /usr/libexec/sendmail/sendmail
   
           echo '===> Installed sendmail with smtp_auth'
       fi
   }
   
 update_etc() {  update_etc() {
     if [ X"" == X"$SYSMERGE" ]; then      echo '==> UPDATING ETC'
         if [ -e /var/tmp/temproot ]; then      if [ ! -e $SYSMERGE ]; then
             MERGEMASTER=`which mergemaster`          echo "ERROR: Can't find sysmerge!" >&2
           exit 1;
       fi
   
             if [ $? != 0 ]; then      if [ X"" == X"$RELEASEDIR" ]; then
                 $SUDO pkg_add -i mergemaster          echo "ERROR: no source for etc!" >&2
                 MERGEMASTER=`which mergemaster`          exit 1
                 if [ $? != 0 ]; then      fi
                     echo ERROR: mergemaster not installed! >&2  
                     exit 1  
                 fi  
             fi  
   
             echo '### RUNNING MERGEMASTER ###'      cd $RELEASEDIR
             $SUDO $MERGEMASTER -irv  
         else  
             echo "ERROR: no source for etc!" >&2  
             exit 1  
         fi  
     else  
         if [ X"" == X"$RELEASEDIR" ]; then  
             echo "ERROR: no source for etc!" >&2  
             exit 1  
         else  
             cd $RELEASEDIR  
         fi  
   
         _cv=`echo $CUR_VER | sed -e 's/\.//'`      local _v=$FILE_VER
         if [ -e etc${_cv}.tgz ]; then      local _args=""
             _args="$_args -s etc${_cv}.tgz"      if [ -e etc${_v}.tgz ]; then
         fi          _args="$_args -s ${RELEASEDIR}/etc${_v}.tgz"
         if [ -e xetc${_cv}.tgz ]; then  
             _args="$_args -x xetc${_cv}.tgz"  
         fi  
         if [ X"" == X"$_args" ]; then  
             echo ERROR: No upgrade sets found! >&2  
         else  
             echo '### RUNNING SYSMERGE ###'  
             _args="-a $_args"  
             $SUDO $SYSMERGE $_args  
         fi  
     fi      fi
       if [ -e xetc${_v}.tgz ]; then
           _args="$_args -x ${RELEASEDIR}/xetc${_v}.tgz"
       fi
       if [ X"" == X"$_args" ]; then
           echo ERROR: No upgrade sets found! >&2
       else
           echo '==> RUNNING SYSMERGE'
           $SUDO $SYSMERGE $_args
       fi
   
       cd $OLDPWD
 }  }
   
 PKG_PATH=${PKG_PATH:=/usr/ports/packages/`machine`/all/:${MIRROR}/`uname -r`/packages/`machine`/}  
   
 if [ X"" != X"$SYSMERGE" ]; then  if [ -e /etc/update_openbsd.conf ]; then
     if [ ! -e $SYSMERGE ]; then      . /etc/update_openbsd.conf
         SYSMERGE=  
     fi  
 fi  fi
   
   if [ -e ${HOME}/.update_openbsdrc ]; then
       . ${HOME}/.update_openbsdrc
   fi
   
   #MIRROR=${MIRROR:=ftp://ftp.openbsd.org/pub/OpenBSD}
   FTP_CMD=${FTP_CMD:=ftp -V}
   PKG_PATH=${PKG_PATH:=/usr/ports/packages/`machine`/all/:${MIRROR}/`uname -r`/packages/`machine`/}
   
   DESTDIR=${DESTDIR:=/}
   SYSMERGE=${SYSMERGE:=/usr/sbin/sysmerge}
   FORCE_DIR=${FORCE_DIR:=No}
   
   INSTALLED_SETS=${INSTALLED_SETS:=`installed_sets`}
   
   CHECKSUM_TYPES=${CHECKSUM_TYPES:=SHA256.sig SHA256}
   
 set_version  set_version
   local _error=$?
   
 echo  echo
 echo "-= update_openbsd - helper script to update OpenBSD =-"  echo "-= update_openbsd - helper script to update OpenBSD =-"
 echo "------------------------------------------------------"  echo "------------------------------------------------------"
 echo  echo
 echo "       DIR: $DIR"  echo "           SUDO: $SUDO"
 echo "RELEASEDIR: $RELEASEDIR"  echo "       SYSMERGE: $SYSMERGE"
 echo "   DESTDIR: $DESTDIR"  echo "         MIRROR: $MIRROR"
 echo "   CUR_VER: $CUR_VER"  echo "     RELEASEDIR: $RELEASEDIR"
 echo "   NEW_VER: $NEW_VER"  echo "        DESTDIR: $DESTDIR"
 echo "      SUDO: $SUDO"  echo "    BOOT_KERNEL: $BOOT_KERNEL"
 echo "  SYSMERGE: $SYSMERGE"  echo "INSTALL_KERNELS: $INSTALL_KERNELS"
 echo "    MIRROR: $MIRROR"  echo " INSTALLED_SETS: $INSTALLED_SETS"
 echo  echo
   echo "        CUR_VER: $CUR_VER"
   echo "        NEW_VER: $NEW_VER"
   #echo "       FILE_VER: $FILE_VER"
   echo
   
 if [ X"" == X"$RELEASEDIR" ]; then  if [ ${_error} -ne 0 ]; then
     echo '### GETTING SETS ###'          exit ${_error}
   fi
   
   if [ X"" != X"${FTP}" ]; then
     get_sets      get_sets
 fi  fi
   
 if [ X"" != X"$SUDO" ]; then  check_sets || exit
     echo Please enter your sudo password if prompted.  
     echo You may be asked for it again later in the process.  echo "===> Last booted:\n$BOOTED_KERNEL_VERSION"
     $SUDO -v  if [ X"$BOOT_KERNEL_VERSION" != X"$BOOTED_KERNEL_VERSION" \
     -a X"$BOOT_KERNEL_VERSION" != X"$NEW_KERNEL_VERSION" ]; then
       echo "Next boot (unless replaced):\n$BOOT_KERNEL_VERSION"
 fi  fi
   if [ -n "$NEW_KERNEL_VERSION" ]; then
       echo "===> New $BOOT_KERNEL:\n$NEW_KERNEL_VERSION";
   else
       echo "\n!!! WARNING: Will not replace boot kernel $BOOT_KERNEL! !!!\n" >&2
       echo "ctrl+C to cancel, enter to continue anyway" >&2
       local _temp
       read _temp
       NEW_KERNEL_VERSION=$BOOT_KERNEL_VERSION
   fi
   
 echo '### INSTALLING KERNEL ###'  if [ -n "$SUDO" -a $CUR_VER != $NEW_VER ]; then
 install_kernel      echo >&2
       echo "!!! You are upgrading between OpenBSD versions.     !!!" >&2
       echo "!!! You should make sure you have a root shell open !!!" >&2
       echo "!!! It is needed in order to run /sbin/oreboot.     !!!" >&2
       echo "!!! sudo MAY NOT WORK after sets are extracted.     !!!" >&2
       echo >&2
       echo "ctrl+C to cancel, enter to continue" >&2
       local _temp
       read _temp
   fi
   
 if [ $CUR_VER == $NEW_VER -o X"" != X"$FORCE_DIR" ]; then  if [ -n "$SUDO" ]; then
     echo '### INSTALLING SETS ###'      echo
     install_sets      echo You may be asked for your sudo password multiple times.
       $SUDO -v -p "sudo Password: "
   fi
   
     echo '### UPDATING ETC ###'  if [ X"$NEW_KERNEL_VERSION" != X"$BOOTED_KERNEL_VERSION" \
        -a ! -e /sbin/oreboot ]; then
       $SUDO cp /sbin/reboot /sbin/oreboot
       if [ $? -ne 0 ]; then
           echo "Error copying old reboot command!" >&2
           exit 1
       fi
       echo "/sbin/reboot copied to /sbin/oreboot"
   fi
   
   install_kernels
   install_sets
   
   if [ X"$NEW_KERNEL_VERSION" == X"$BOOTED_KERNEL_VERSION" ]; then
       install_sendmail_smtp_auth
   
       if [ -e /sbin/oreboot ]; then
           echo Removing /sbin/oreboot
           $SUDO rm -f /sbin/oreboot
       fi
     update_etc      update_etc
   
     echo '### UPDATING PACKAGES ###'      echo '==> UPDATING PACKAGES'
     $SUDO pkg_add -ui -F update -F updatedepends      $SUDO pkg_add -ui -F update -F updatedepends
   
 else  else
     echo Instructions for updating to the new version available from      echo Instructions for updating to the new version available from
     echo "  http://www.openbsd.org/faq/upgrade${_v}.html"      if [ X"snapshots" == X"$FORCE_DIR" ]; then
           echo "  http://www.openbsd.org/faq/current.html"
       else
           echo "  http://www.openbsd.org/faq/upgrade${FILE_VER}.html"
       fi
 fi  fi
   
 echo New kernel installed.  Please reboot!  echo New kernel installed.  Please reboot!
   if [ -e /sbin/oreboot ]; then
       echo Possibly using /sbin/oreboot
   fi
Legend:
Removed from v.1.3  
changed lines
  Added in v.1.62
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>