[BACK]Return to fw_install.sh CVS log [TXT][DIR] Up to [local] / openbsd / fw_update

Diff for /openbsd/fw_update/fw_install.sh between version 1.6 and 1.14

version 1.6, 2021/10/14 02:39:43 version 1.14, 2021/10/17 23:25:14
Line 13 
Line 13 
         done          done
 }  }
   
 # do_as, unpriv, and unpriv2 are from install.sub  # tmpdir, do_as, unpriv, and unpriv2 are from install.sub
   
   # Create a temporary directory based on the supplied directory name prefix.
   tmpdir() {
           local _i=1 _dir
   
           until _dir="${1?}.$_i.$RANDOM" && mkdir -- "$_dir" 2>/dev/null; do
                   ((++_i < 10000)) || return 1
           done
           echo "$_dir"
   }
   
 # Run a command ($2+) as unprivileged user ($1).  # Run a command ($2+) as unprivileged user ($1).
 # Take extra care that after "cmd" no "user" processes exist.  # Take extra care that after "cmd" no "user" processes exist.
 #  #
Line 60 
Line 70 
         do_as _file "$@"          do_as _file "$@"
 }  }
   
 set -A _KERNV -- $( scan_dmesg '/^OpenBSD \([1-9][0-9]*\.[0-9]\)\([^ ]*\) .*/ { s//\1 \2/p; q; }' )  _issue=
 VNAME=${_KERNV[0]}  fail() {
 OSDIR=$VNAME          echo $_issue >&2
 if ((${#_KERNV[*]} > 1)) && [ "$_KERNV[1]" = "-current" -o "$_KERNV[1]" = "-beta" ]; then          exit 1
         OSDIR=snapshots  }
 fi  
   
 FWURL=http://firmware.openbsd.org/firmware/${OSDIR}  VNAME=$(sysctl -n kern.osrelease)
   VERSION="${VNAME%.*}${VNAME#*.}"
   FWDIR="$VNAME"
   
   # TODO: We need the firmware for the system we just installed
   #       not the one we booted from.  For example:
   #       * booting from a snapshot bsd.rd that thinks it is the 7.0 release
   #         will install the firmware from the 7.0 directory instead of
   #         from the snapshots dir.
   #       If they're using sysupgrade, then the installer kernel will be correct.
   #       If we're doing this in the installer we can check what they picked
   #       for downloading sets and use that value.
   #       Otherwise, the fw_update after first boot will fix it up for us.
   
   HTTP_FWDIR=$FWDIR
   set -- $(scan_dmesg "/^OpenBSD $VNAME\([^ ]*\).*$/s//\1/p")
   [[ $1 == -!(stable) ]] && HTTP_FWDIR=snapshots
   
   FWURL=http://firmware.openbsd.org/firmware/${HTTP_FWDIR}
   FWPUB_KEY=${DESTDIR}/etc/signify/openbsd-${VERSION}-fw.pub
 PKGDIR=${DESTDIR}/var/db/pkg  PKGDIR=${DESTDIR}/var/db/pkg
 PATTERNS="file:${0%/*}/firmware_patterns"  PATTERNS="file:${0%/*}/firmware_patterns"
   
 drivers=$(  fw_update() {
         last=''          local _tmpsrc _f _remove _r
         ftp -D "Detecting" -Vmo- $PATTERNS |          local _src=$FWURL _t=Get _cfile="/tmp/SHA256" _srclocal=false
         while read d m; do          local _drivers=$(
                 grep=grep                  last=''
                 [ "$last" = "$d" ] && continue                  ftp -D "Detecting" -Vmo- $PATTERNS |
                 [ "$m" ] || m="^$d[0-9][0-9]* at "                  while read d m; do
                 [ "$m" = "${m#^}" ] && grep=fgrep                          grep=grep
                 $grep -q "$m" /var/run/dmesg.boot || continue                          [ "$last" = "$d" ] && continue
                 echo $d                          [ "$m" ] || m="^$d[0-9][0-9]* at "
                 last=$d                          [ "$m" = "${m#^}" ] && grep=fgrep
         done                          $grep -q "$m" /var/run/dmesg.boot || continue
 )                          echo $d
                           last=$d
                   done
           )
   
 if [ -z "$drivers" ]; then          if [ -z "$_drivers" ]; then
         echo "No devices found which need firmware files to be downloaded." >&2                  echo "No devices found which need firmware files to be downloaded." >&2
         exit 0                  return
 fi          fi
   
 tmpdir=${DESTDIR}/tmp/fw_update          if _tmpsrc=$( tmpdir "${DESTDIR}/tmp/fw_update" ); then
 [ -e "$tmpdir" ] && rm -rf "$tmpdir"                  (
 mkdir -p "$tmpdir"                  >$_tmpsrc/t &&
 cd "$tmpdir"                  $_unpriv cat $_tmpsrc/t
                   ) >/dev/null 2>&1 ||
                       rm -r $_tmpsrc
           fi
   
 # TODO: Drop privs during fetch and verify          [[ ! -d $_tmpsrc ]] &&
 ftp -D Get -Vm "$FWURL/SHA256.sig"                  _issue="Cannot create prefetch area" && fail
   
 # Probably should bundle the firmware sigfile on the installer,          ! $_unpriv ftp -D "$_t" -Vmo - "$_src/SHA256.sig" >"$_cfile.sig" &&
 # although we can just get it from the recently installed system.              _issue="Cannot fetch SHA256.sig" && fail
 if [ "$DESTDIR" ]; then  
         sigfile=$( sed -n '/^untrusted comment: verify with \(.*\)$/ { s//\1/p; q; }' SHA256.sig )  
         if [ ! -e "/etc/signify/$sigfile" ] \  
           && [ -e "${DESTDIR}/etc/signify/$sigfile" ]; then  
                 cp -a "${DESTDIR}/etc/signify/$sigfile" "/etc/signify/$sigfile"  
         fi  
 fi  
   
 signify -Ve -x SHA256.sig -m - < SHA256.sig > SHA256          # Verify signature file with public keys.
           ! unpriv -f "$_cfile" \
               signify -Vep $FWPUB_KEY -x "$_cfile.sig" -m "$_cfile" &&
               _issue="Signature check of SHA256.sig failed" && fail
   
 for d in $drivers; do          for d in $_drivers; do
         firmware=$( sed -n "s/.*(\($d-firmware-.*\.tgz\)).*/\1/p" SHA256 )                  _f=$( sed -n "s/.*(\($d-firmware-.*\.tgz\)).*/\1/p" "$_cfile" )
         installed=$( installed_firmware $d )                  installed=$( installed_firmware "$d" )
   
         for i in $installed; do                  for i in $installed; do
                 if [ "$firmware" = "$i.tgz" ]; then                          if [ "$_f" = "$i.tgz" ]; then
                         echo "Firmware for $d already installed ($installed)"                                  echo "Firmware for $d already installed ($installed)"
                         continue 2                                  continue 2
                 fi                          fi
         done                  done
   
         mkdir $d                  rm -f /tmp/h /tmp/fail
   
         # TODO: Drop privs during fetch and verify                  _t=Get/Verify
         ftp -D "Get/Verify" -Vmo- "$FWURL/$firmware" | sha256 -bph "$d/h" > "$firmware"                  # Fetch firmware file and create a checksum by piping through
         fgrep -qx "SHA256 ($firmware) = $(<$d/h)" SHA256                  # sha256. Create a flag file in case ftp failed. Firmware
                   # from net is written to the prefetch area.
                   ( $_unpriv ftp -D "$_t" -Vmo - "$_src/$_f" || >/tmp/fail ) |
                   ( $_srclocal && unpriv2 sha256 -b >/tmp/h ||
                       unpriv2 -f /tmp/h sha256 -bph /tmp/h >"$_tmpsrc/$_f" )
   
         # TODO: Check hash for files before deleting                  # Handle failed transfer.
         if [ "$installed" ] && [ -e "${PKGDIR}/$installed/+CONTENTS" ]; then                  if [[ -f /tmp/fail ]]; then
                 echo "Uninstalling $installed"                          rm -f "$_tmpsrc/$_f"
                 cwd=${PKGDIR}/$installed                          _issue="Fetching of $_f failed!"
                           fail
                   fi
   
                 remove="${cwd}/+CONTENTS ${cwd}"                  # Verify firmware by comparing its checksum with SHA256.
                   if fgrep -qx "SHA256 ($_f) = $(</tmp/h)" "$_cfile"; then
                           #_unver=$(rmel $_f $_unver)
                           true
                   else
                           [[ -d "$_tmpsrc" ]] && rm -rf "$_tmpsrc"
                           _issue="Checksum test for $_f failed."
                           fail
                   fi
   
                 while read c g; do                  # TODO: Check hash for files before deleting
                         case $c in                  if [ "$installed" ] && [ -e "${PKGDIR}/$installed/+CONTENTS" ]; then
                         @cwd) cwd=$g                          echo "Uninstalling $installed"
                           ;;                          cwd=${PKGDIR}/$installed
                         @*) continue  
                           ;;  
                         *)  remove="$cwd/$c $remove"  
                           ;;  
                         esac  
                 done < "${PKGDIR}/$installed/+CONTENTS"  
   
                 for r in $remove ; do                          set -A _remove -- "${cwd}/+CONTENTS" "${cwd}"
                         if [ -d "$r" ]; then  
                                 # Try hard not to actually remove recursively  
                                 # without rmdir on the install media.  
                                 [ "$r/*" = $( echo "$r"/* ) ] && rm -rf "$r"  
                         else  
                                 rm -f "$r"  
                         fi  
                 done  
         fi  
   
         # TODO: Add some details about the install to +CONTENTS like pkg_add                          while read c g; do
         # TODO: Or, maybe we save the firmware someplace and make pkg_add reinstall                                  case $c in
         echo "Installing $firmware"                                  @cwd) cwd="${DESTDIR}/$g"
         tar -zxphf "$firmware" -C /etc "firmware/*"                                    ;;
         mkdir -p ${PKGDIR}/${firmware%.tgz}/                                  @*) continue
         tar -zxphf "$firmware" -C "${PKGDIR}/${firmware%.tgz}" "+*"                                    ;;
         ed -s "${PKGDIR}/${firmware%.tgz}/+CONTENTS" <<EOL                                  *)  set -A _remove -- "$cwd/$c" "${_remove[@]}"
                                     ;;
                                   esac
                           done < "${PKGDIR}/$installed/+CONTENTS"
   
                           for _r in "${_remove[@]}" ; do
                                   if [ -d "$_r" ]; then
                                           # Try hard not to actually remove recursively
                                           # without rmdir on the install media.
                                           [ "$_r/*" = $( echo "$_r"/* ) ] && rm -rf "$_r"
                                   else
                                           rm -f "$_r"
                                   fi
                           done
                   fi
   
           # TODO: Add some details about the install to +CONTENTS like pkg_add
           # TODO: Or, maybe we save the firmware someplace and make pkg_add reinstall
                   echo "Installing $_f"
                   tar -zxphf "$_tmpsrc/$_f" -C "${DESTDIR}/etc" "firmware/*"
                   mkdir -p ${PKGDIR}/${_f%.tgz}/
                   tar -zxphf "$_tmpsrc/$_f" -C "${PKGDIR}/${_f%.tgz}" "+*"
                   ed -s "${PKGDIR}/${_f%.tgz}/+CONTENTS" <<EOL
 /^@comment pkgpath/ -1a  /^@comment pkgpath/ -1a
 @option manual-installation  @option manual-installation
 @option firmware  @option firmware
Line 170 
Line 221 
 .  .
 w  w
 EOL  EOL
 done          done
   }
   
   fw_update
Legend:
Removed from v.1.6  
changed lines
  Added in v.1.14
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>