Return to sensorsd.conf CVS log

Up to [local] / nagios / check_hw_sensors

Updated sensor examples.

# $RedRiver$
# hw.sensors.esm0.temp0=35.00 degC (CPU 1), OK
# hw.sensors.esm0.temp1=35.00 degC (CPU 2), OK
# hw.sensors.esm0.temp2=29.00 degC (Mainboard), OK
# hw.sensors.esm0.temp3=22.00 degC (Ambient), OK
# hw.sensors.esm0.temp4=30.00 degC (Backplane Top), OK
# hw.sensors.esm0.temp5=30.00 degC (Backplane Bottom), OK
# hw.sensors.esm0.fan0=3828 RPM (Fan 1), OK
# hw.sensors.esm0.fan1=4011 RPM (Fan 2), OK
# hw.sensors.esm0.fan2=3662 RPM (Backplane Fan 1), OK
# hw.sensors.esm0.fan3=3514 RPM (Backplane Fan 2), OK
# hw.sensors.esm0.fan4=3475 RPM (Backplane Fan 3), OK
# hw.sensors.esm0.fan5=3784 RPM (Power Supply 1 Fan), OK
# hw.sensors.esm0.fan6=3478 RPM (Power Supply 2 Fan), OK
# hw.sensors.esm0.fan7=3120 RPM (Power Supply 3 Fan), OK

# hw.sensors.esm0.fan8=0 RPM (Fan 1), CRITICAL
hw.sensors.esm0.fan8:ignore
# hw.sensors.esm0.fan9=0 RPM (Fan 2), CRITICAL
hw.sensors.esm0.fan9:ignore
# hw.sensors.esm0.fan10=0 RPM (Fan 3), CRITICAL
hw.sensors.esm0.fan10:ignore
# hw.sensors.esm0.fan11=0 RPM (Fan 4), CRITICAL
hw.sensors.esm0.fan11:ignore
# hw.sensors.esm0.fan12=0 RPM (Fan 5), CRITICAL
hw.sensors.esm0.fan12:ignore
# hw.sensors.esm0.fan13=0 RPM (Fan 6), CRITICAL
hw.sensors.esm0.fan13:ignore

# hw.sensors.esm0.volt0=1.65 VDC (CPU 1 Core), OK
# hw.sensors.esm0.volt1=1.66 VDC (CPU 2 Core), OK
# hw.sensors.esm0.volt2=4.98 VDC (Motherboard +5V), OK
# hw.sensors.esm0.volt3=11.95 VDC (Motherboard +12V), OK
# hw.sensors.esm0.volt4=3.23 VDC (Motherboard +3.3V), OK
# hw.sensors.esm0.volt5=2.49 VDC (Motherboard +2.5V), OK
# hw.sensors.esm0.volt6=1.50 VDC (Motherboard GTL Term), OK
# hw.sensors.esm0.volt7=2.90 VDC (Motherboard Battery), OK
# hw.sensors.esm0.volt8=4.97 VDC (Backplane +5V), OK
# hw.sensors.esm0.volt9=12.06 VDC (Backplane +12V), OK
# hw.sensors.esm0.volt10=2.83 VDC (Backplane Board), OK
# hw.sensors.esm0.volt11=4.70 VDC (Backplane SCSI A External), OK
# hw.sensors.esm0.volt12=4.78 VDC (Backplane SCSI A Internal), OK

# hw.sensors.esm0.volt13=5.07 VDC (Power Supply 1 +5V)
hw.sensors.esm0.volt13:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V
# hw.sensors.esm0.volt14=12.12 VDC (Power Supply 1 +12V)
hw.sensors.esm0.volt14:
# hw.sensors.esm0.volt15=3.32 VDC (Power Supply 1 +3.3V)
hw.sensors.esm0.volt15:
# hw.sensors.esm0.volt16=5.08 VDC (Power Supply 1 -5V)
hw.sensors.esm0.volt16:
# hw.sensors.esm0.volt17=12.20 VDC (Power Supply 1 -12V)
hw.sensors.esm0.volt17:

# hw.sensors.esm0.volt18=5.09 VDC (Power Supply 2 +5V)
hw.sensors.esm0.volt18:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V
# hw.sensors.esm0.volt19=12.07 VDC (Power Supply 2 +12V)
hw.sensors.esm0.volt19:
# hw.sensors.esm0.volt20=3.34 VDC (Power Supply 2 +3.3V)
hw.sensors.esm0.volt20:
# hw.sensors.esm0.volt21=5.01 VDC (Power Supply 2 -5V)
hw.sensors.esm0.volt21:
# hw.sensors.esm0.volt22=12.03 VDC (Power Supply 2 -12V)
hw.sensors.esm0.volt22:

# hw.sensors.esm0.volt23=5.03 VDC (Power Supply 3 +5V)
hw.sensors.esm0.volt23:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V
# hw.sensors.esm0.volt24=12.13 VDC (Power Supply 3 +12V)
hw.sensors.esm0.volt24:
# hw.sensors.esm0.volt25=3.34 VDC (Power Supply 3 +3.3V)
hw.sensors.esm0.volt25:
# hw.sensors.esm0.volt26=5.03 VDC (Power Supply 3 -5V)
hw.sensors.esm0.volt26:
# hw.sensors.esm0.volt27=11.97 VDC (Power Supply 3 -12V)
hw.sensors.esm0.volt27:

# hw.sensors.esm0.volt28=5.02 VDC (System Power Supply +5V)
hw.sensors.esm0.volt28:
# hw.sensors.esm0.volt29=12.09 VDC (System Power Supply +12V)
hw.sensors.esm0.volt29:
# hw.sensors.esm0.volt30=3.32 VDC (System Power Supply +3.3V)
hw.sensors.esm0.volt30:
# hw.sensors.esm0.volt31=4.91 VDC (System Power Supply -5V)
hw.sensors.esm0.volt31:
# hw.sensors.esm0.volt32=11.82 VDC (System Power Supply -12V)
hw.sensors.esm0.volt32:
# hw.sensors.esm0.volt33=5.16 VDC (System Power Supply +5V aux)
hw.sensors.esm0.volt33:

# hw.sensors.esm0.current0=2.30 A (Power Supply 1 +5V), OK
# hw.sensors.esm0.current1=0.90 A (Power Supply 1 +12V), OK
# hw.sensors.esm0.current2=1.50 A (Power Supply 1 +3.3V), OK
# hw.sensors.esm0.current3=1.90 A (Power Supply 2 +5V), OK
# hw.sensors.esm0.current4=0.90 A (Power Supply 2 +12V), OK
# hw.sensors.esm0.current5=1.50 A (Power Supply 2 +3.3V), OK
# hw.sensors.esm0.current6=1.30 A (Power Supply 3 +5V), OK
# hw.sensors.esm0.current7=0.90 A (Power Supply 3 +12V), OK
# hw.sensors.esm0.current8=1.50 A (Power Supply 3 +3.3V), OK

# hw.sensors.esm0.indicator0=Off (Chassis Intrusion)
hw.sensors.esm0.indicator0:crit=Off
# hw.sensors.esm0.indicator1=On (Backplane SCSI A Connected)
hw.sensors.esm0.indicator1:crit=On

# hw.sensors.esm0.indicator2=On (Power Supply 1 AC)
hw.sensors.esm0.indicator2:crit=On
# hw.sensors.esm0.indicator3=On (Power Supply 1 SW)
hw.sensors.esm0.indicator3:crit=On
# hw.sensors.esm0.indicator4=On (Power Supply 1 OK)
hw.sensors.esm0.indicator4:crit=On
# hw.sensors.esm0.indicator5=On (Power Supply 1 ON), OK
# hw.sensors.esm0.indicator6=Off (Power Supply 1 FFAN)
hw.sensors.esm0.indicator6:crit=Off
# hw.sensors.esm0.indicator7=Off (Power Supply 1 OTMP)
hw.sensors.esm0.indicator7:crit=Off

# hw.sensors.esm0.indicator8=On (Power Supply 2 AC)
hw.sensors.esm0.indicator8:crit=On
# hw.sensors.esm0.indicator9=On (Power Supply 2 SW)
hw.sensors.esm0.indicator9:crit=On
# hw.sensors.esm0.indicator10=On (Power Supply 2 OK)
hw.sensors.esm0.indicator10:crit=On
# hw.sensors.esm0.indicator11=On (Power Supply 2 ON), OK
# hw.sensors.esm0.indicator12=Off (Power Supply 2 FFAN)
hw.sensors.esm0.indicator12:crit=Off
# hw.sensors.esm0.indicator13=Off (Power Supply 2 OTMP)
hw.sensors.esm0.indicator13:crit=Off

# hw.sensors.esm0.indicator14=On (Power Supply 3 AC)
hw.sensors.esm0.indicator14:crit=On
# hw.sensors.esm0.indicator15=On (Power Supply 3 SW)
hw.sensors.esm0.indicator15:crit=On
# hw.sensors.esm0.indicator16=On (Power Supply 3 OK)
hw.sensors.esm0.indicator16:crit=On
# hw.sensors.esm0.indicator17=On (Power Supply 3 ON), OK
# hw.sensors.esm0.indicator18=Off (Power Supply 3 FFAN)
hw.sensors.esm0.indicator18:crit=Off
# hw.sensors.esm0.indicator19=Off (Power Supply 3 OTMP)
hw.sensors.esm0.indicator19:crit=Off

# hw.sensors.esm0.raw0=2 (Chassis Fan Ctrl)
# hw.sensors.esm0.raw1=227 (Backplane Control)
# hw.sensors.esm0.raw2=8738 (Backplane Fan Control)
# hw.sensors.esm0.raw3=42498 (Fan Enclosure)

# hw.sensors.esm0.drive0=online (Drive 0)
hw.sensors.esm0.drive0:crit=online
# hw.sensors.esm0.drive1=online (Drive 1)
hw.sensors.esm0.drive1:crit=online
# hw.sensors.esm0.drive2=unknown (Drive 2)
hw.sensors.esm0.drive2:crit=unknown
# hw.sensors.esm0.drive3=unknown (Drive 3)
hw.sensors.esm0.drive3:crit=unknown
# hw.sensors.esm0.drive4=online (Drive 4)
hw.sensors.esm0.drive4:crit=online
# hw.sensors.esm0.drive5=online (Drive 5)
hw.sensors.esm0.drive5:crit=online
# hw.sensors.esm0.drive6=unknown (Drive 6)
hw.sensors.esm0.drive6:crit=unknown
# hw.sensors.esm0.drive7=unknown (Drive 7)
hw.sensors.esm0.drive7:crit=unknown

# hw.sensors.ami0.drive0=online (sd0), OK
# hw.sensors.ami0.drive1=online (sd1), OK
# hw.sensors.safte0.temp0=30.00 degC, OK
# hw.sensors.safte0.temp1=30.00 degC, OK
# hw.sensors.safte0.indicator0=On (Fan0), OK
# hw.sensors.safte0.indicator1=On (Fan1), OK
# hw.sensors.safte0.indicator2=On (Fan2), OK