Return to sensorsd.conf CVS log

Up to [local] / nagios / check_hw_sensors

new better example for 4.0
and fix the s/drive\s// from the data, not the type

# $RedRiver$
# hw.sensors.0=esm0, CPU 1, 39.00 degC, OK
# hw.sensors.1=esm0, CPU 2, 37.00 degC, OK
# hw.sensors.2=esm0, Mainboard, 29.50 degC, OK
# hw.sensors.3=esm0, CPU 1 Core, 1.74 V DC, OK
# hw.sensors.4=esm0, CPU 2 Core, 1.73 V DC, OK
# hw.sensors.5=esm0, Motherboard +5V, 4.94 V DC, OK
# hw.sensors.6=esm0, Motherboard +12V, 11.90 V DC, OK
# hw.sensors.7=esm0, Motherboard +3.3V, 3.22 V DC, OK
# hw.sensors.8=esm0, Motherboard +2.5V, 2.49 V DC, OK
# hw.sensors.9=esm0, Motherboard GTL Term, 1.49 V DC, OK
# hw.sensors.10=esm0, Motherboard Battery, 2.98 V DC, OK
# hw.sensors.11=esm0, Chassis Intrusion, Off
hw.sensors.11:crit=Off
# hw.sensors.12=esm0, Fan 1, 3586 RPM, OK
# hw.sensors.13=esm0, Fan 2, 3539 RPM, OK
# hw.sensors.14=esm0, Fan 3, 3536 RPM, OK
# hw.sensors.15=esm0, Backplane, 0 raw
# hw.sensors.16=esm0, Backplane Top, 28.00 degC, OK
# hw.sensors.17=esm0, Backplane Bottom, 30.50 degC, OK
# hw.sensors.18=esm0, Backplane +5V, 4.94 V DC, OK
# hw.sensors.19=esm0, Backplane +12V, 11.81 V DC, OK
# hw.sensors.20=esm0, Backplane SCSI A Connected, On
hw.sensors.20:crit=On
# hw.sensors.21=esm0, Backplane SCSI A External, 4.61 V DC, OK
# hw.sensors.22=esm0, Backplane SCSI B Connected, Off
# hw.sensors.23=esm0, Drive 0, drive online
hw.sensors.23:crit=online
# hw.sensors.24=esm0, Drive 1, drive online
hw.sensors.24:crit=online
# hw.sensors.25=esm0, Drive 2, drive online
hw.sensors.25:crit=online
# hw.sensors.26=esm0, Drive 3, drive online
hw.sensors.26:crit=online
# hw.sensors.27=esm0, Drive 4, drive online
hw.sensors.27:crit=online
# hw.sensors.28=esm0, Backplane Control 2, 1 raw
# hw.sensors.29=esm0, Backplane +3.3V, 3.28 V DC, OK
# hw.sensors.30=ami0, sd0, drive online, OK
# hw.sensors.31=ami0, sd1, drive online, OK
# hw.sensors.32=safte0, Temp0, 27.78 degC, OK
# hw.sensors.33=safte0, Temp1, 30.56 degC, OK