Return to README CVS log

Up to [local] / nagios / check_bioctl

Annotation of nagios/check_bioctl/README, Revision 1.7

1.1       andrew      1: check_bioctl - checks status of a RAID array using bioctl
                      2:
1.5       andrew      3: This check is for OpenBSD machines with bioctl(8) supported RAID cards.
1.2       andrew      4:
1.1       andrew      5: The only real caveat with it is that bioctl needs rw permission to
                      6: /dev/bio. One way to allow for that is by adding an entry to
1.7     ! andrew      7: /etc/doas.conf.
1.1       andrew      8:
1.2       andrew      9: This is an example of a setup for NRPE. For checks on the machine running
1.7     ! andrew     10: Nagios, use the _nagios user in /etc/doas.conf instead of _nrpe, and of course,
        !            11: no ${SYSCONFDIR}/nrpe.cfg. check_bioctl runs bioctl once for each device, so
        !            12: you will need a doas.conf entry that matches each device you wish to check. If
        !            13: you have multiple RAID volumes, you'll need one permit rules per volume.
        !            14:
        !            15: /etc/doas.conf:
        !            16: permit nopass _nrpe as root cmd /sbin/bioctl args ami0
        !            17: permit nopass _nrpe as root cmd /sbin/bioctl args ami1
1.1       andrew     18:
1.4       andrew     19: ${SYSCONFDIR}/nrpe.cfg:
1.6       andrew     20: command[check_bioctl]=${PREFIX}/libexec/nagios/check_bioctl -d ami0 -d ami1
1.1       andrew     21:
1.2       andrew     22: For more information on bioctl(8) see the OpenBSD man page.
                     23:
1.7     ! andrew     24: https://www.openbsd.org
1.2       andrew     25:
1.7     ! andrew     26: $AFresh1: README,v 1.6 2014/06/27 18:59:56 andrew Exp $