version 1.1, 2009/11/09 17:56:36 |
version 1.5, 2009/11/12 18:55:03 |
|
|
check_bioctl - checks status of a RAID array using bioctl |
check_bioctl - checks status of a RAID array using bioctl |
|
|
|
This check is for OpenBSD machines with bioctl(8) supported RAID cards. |
|
|
The only real caveat with it is that bioctl needs rw permission to |
The only real caveat with it is that bioctl needs rw permission to |
/dev/bio. One way to allow for that is by adding an entry to |
/dev/bio. One way to allow for that is by adding an entry to |
/etc/sudoers and then making the check run sudo check_bioctl. |
/etc/sudoers and then making the check run sudo check_bioctl. |
|
|
This is an example of what I have set up for NRPE. For checks on |
This is an example of a setup for NRPE. For checks on the machine running |
the machine running Nagios, use the _nagios user in /etc/sudoers |
Nagios, use the _nagios user in /etc/sudoers instead of _nrpe, and of course, |
instead of _nrpe, and of course, no /etc/nrpe.cfg. |
no ${SYSCONFDIR}/nrpe.cfg. |
|
|
/etc/sudoers: |
/etc/sudoers: |
_nrpe ALL = NOPASSWD:${PREFIX}/nagios/check_bioctl -d ami0 |
_nrpe ALL = NOPASSWD:${PREFIX}/libexec/nagios/check_bioctl -d ami0 |
|
|
/etc/nrpe.cfg: |
${SYSCONFDIR}/nrpe.cfg: |
command[check_bioctl]=/usr/bin/sudo ${PREFIX}/nagios/check_bioctl -d ami0 |
command[check_bioctl]=/usr/bin/sudo ${PREFIX}/libexec/nagios/check_bioctl -d ami0 |
|
|
$RedRiver$ |
For more information on bioctl(8) see the OpenBSD man page. |
|
|
|
http://www.openbsd.org |
|
|
|
$RedRiver: README,v 1.4 2009/11/09 20:41:49 andrew Exp $ |