# $OpenBSD: sensorsd.conf,v 1.1 2003/10/08 20:30:04 grange Exp $
# $RedRiver$

#
# Sample sensorsd.conf file. See sensorsd.conf(5) for details.
# This one has examples for use with nagios check_hw_sensors
# Actual sensors on a 2450 are below.
#

# hw.sensors.0=esm0, Motherboard, raw, 0
# hw.sensors.1=esm0, CPU 1, OK, temp, 28.00 degC / 82.40 degF
hw.sensors.1:high=50C:warn.high=40C

# hw.sensors.2=esm0, CPU 2, OK, temp, 30.00 degC / 86.00 degF
hw.sensors.2:high=50C:warn.high=40C

# hw.sensors.3=esm0, Mainboard, OK, temp, 21.50 degC / 70.70 degF
hw.sensors.3:high=40C:warn.high=30C

# hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V
hw.sensors.4:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V

# hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V
hw.sensors.5:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V

# hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V
hw.sensors.6:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V

# hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.94 V
hw.sensors.7:high=12.15V:warn.high=12.1V:low=11.8V:warn.low=11.85V

# hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V
hw.sensors.8:high=3.5V:warn.high=3.4V:low=3.15V:warn.low=3.2V

# hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V
hw.sensors.9:high=2.75V:warn.high=2.6V:low=2.25V:warn.low=2.4V

# hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V
hw.sensors.10:high=1.75V:warn.high=1.6V:low=1.25V:warn.low=1.4V

# hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.93 V
hw.sensors.11:high=3.1V:warn.high=3.05V:low=2.75V:warn.low=2.8V

# hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
hw.sensors.12:crit=Off:warn=Off

# hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3526 RPM
hw.sensors.13:low=3000:warn.low=3250

# hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3569 RPM
hw.sensors.14:low=3000:warn.low=3250

# hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3563 RPM
hw.sensors.15:low=3000:warn.low=3250

# hw.sensors.16=esm0, Backplane, raw, 0
# hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF
hw.sensors.17:high=35C:warn.high=25C

# hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.00 degC / 71.60 degF
hw.sensors.18:high=40C:warn.high=30C

# hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V
hw.sensors.19:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V

# hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On
hw.sensors.20:crit=On:warn=On

# hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V
hw.sensors.21:high=5.1V:warn.high=5.05V:low=4.60V:warn.low=4.65V

# hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off
hw.sensors.22:crit=Off:warn=Off

# hw.sensors.23=esm0, Drive 0, drive, online
hw.sensors.23:crit=online,empty:warn=online

# hw.sensors.24=esm0, Drive 1, drive, online
hw.sensors.24:crit=online,empty:warn=online

# hw.sensors.25=esm0, Drive 2, drive, empty
hw.sensors.25:crit=online,empty:warn=online,empty

# hw.sensors.26=esm0, Drive 3, drive, empty
hw.sensors.26:crit=online,empty:warn=online,empty

# hw.sensors.27=esm0, Backplane Control 2, raw, 17
# hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V
hw.sensors.28:high=3.5V:warn.high=3.4V:low=3.2V:warn.low=3.25V

# hw.sensors.29=safte0, temp0, OK, temp, 14.44 degC / 58.00 degF
hw.sensors.29:high=35C:warn.high=25C

# hw.sensors.30=safte0, temp1, OK, temp, 22.22 degC / 72.00 degF
hw.sensors.30:high=40C:warn.high=30C