Annotation of nagios/check_hw_sensors/sensorsd.conf, Revision 1.1
1.1 ! andrew 1: # $OpenBSD: sensorsd.conf,v 1.1 2003/10/08 20:30:04 grange Exp $
! 2: # $RedRiver$
! 3:
! 4: #
! 5: # Sample sensorsd.conf file. See sensorsd.conf(5) for details.
! 6: # This one has examples for use with nagios check_hw_sensors
! 7: # Actual sensors on a 2450 are below.
! 8: #
! 9:
! 10: # hw.sensors.0=esm0, Motherboard, raw, 0
! 11: # hw.sensors.1=esm0, CPU 1, OK, temp, 28.00 degC / 82.40 degF
! 12: hw.sensors.1:high=50C:warn.high=40C
! 13:
! 14: # hw.sensors.2=esm0, CPU 2, OK, temp, 30.00 degC / 86.00 degF
! 15: hw.sensors.2:high=50C:warn.high=40C
! 16:
! 17: # hw.sensors.3=esm0, Mainboard, OK, temp, 21.50 degC / 70.70 degF
! 18: hw.sensors.3:high=40C:warn.high=30C
! 19:
! 20: # hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V
! 21: hw.sensors.4:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V
! 22:
! 23: # hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V
! 24: hw.sensors.5:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V
! 25:
! 26: # hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V
! 27: hw.sensors.6:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V
! 28:
! 29: # hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.94 V
! 30: hw.sensors.7:high=12.15V:warn.high=12.1V:low=11.8V:warn.low=11.85V
! 31:
! 32: # hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V
! 33: hw.sensors.8:high=3.5V:warn.high=3.4V:low=3.15V:warn.low=3.2V
! 34:
! 35: # hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V
! 36: hw.sensors.9:high=2.75V:warn.high=2.6V:low=2.25V:warn.low=2.4V
! 37:
! 38: # hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V
! 39: hw.sensors.10:high=1.75V:warn.high=1.6V:low=1.25V:warn.low=1.4V
! 40:
! 41: # hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.93 V
! 42: hw.sensors.11:high=3.1V:warn.high=3.05V:low=2.75V:warn.low=2.8V
! 43:
! 44: # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
! 45: hw.sensors.12:crit=Off:warn=Off
! 46:
! 47: # hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3526 RPM
! 48: hw.sensors.13:low=3000:warn.low=3250
! 49:
! 50: # hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3569 RPM
! 51: hw.sensors.14:low=3000:warn.low=3250
! 52:
! 53: # hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3563 RPM
! 54: hw.sensors.15:low=3000:warn.low=3250
! 55:
! 56: # hw.sensors.16=esm0, Backplane, raw, 0
! 57: # hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF
! 58: hw.sensors.17:high=35C:warn.high=25C
! 59:
! 60: # hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.00 degC / 71.60 degF
! 61: hw.sensors.18:high=40C:warn.high=30C
! 62:
! 63: # hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V
! 64: hw.sensors.19:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V
! 65:
! 66: # hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On
! 67: hw.sensors.20:crit=On:warn=On
! 68:
! 69: # hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V
! 70: hw.sensors.21:high=5.1V:warn.high=5.05V:low=4.60V:warn.low=4.65V
! 71:
! 72: # hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off
! 73: hw.sensors.22:crit=Off:warn=Off
! 74:
! 75: # hw.sensors.23=esm0, Drive 0, drive, online
! 76: hw.sensors.23:crit=online,empty:warn=online
! 77:
! 78: # hw.sensors.24=esm0, Drive 1, drive, online
! 79: hw.sensors.24:crit=online,empty:warn=online
! 80:
! 81: # hw.sensors.25=esm0, Drive 2, drive, empty
! 82: hw.sensors.25:crit=online,empty:warn=online,empty
! 83:
! 84: # hw.sensors.26=esm0, Drive 3, drive, empty
! 85: hw.sensors.26:crit=online,empty:warn=online,empty
! 86:
! 87: # hw.sensors.27=esm0, Backplane Control 2, raw, 17
! 88: # hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V
! 89: hw.sensors.28:high=3.5V:warn.high=3.4V:low=3.2V:warn.low=3.25V
! 90:
! 91: # hw.sensors.29=safte0, temp0, OK, temp, 14.44 degC / 58.00 degF
! 92: hw.sensors.29:high=35C:warn.high=25C
! 93:
! 94: # hw.sensors.30=safte0, temp1, OK, temp, 22.22 degC / 72.00 degF
! 95: hw.sensors.30:high=40C:warn.high=30C
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>