[BACK]Return to sensorsd.conf CVS log [TXT][DIR] Up to [local] / nagios / check_hw_sensors

Diff for /nagios/check_hw_sensors/sensorsd.conf between version 1.6 and 1.7

version 1.6, 2006/12/05 16:26:27 version 1.7, 2008/03/10 17:24:06
Line 1 
Line 1 
 # $RedRiver$  # $RedRiver$
 # hw.sensors.0=esm0, CPU 1, 39.00 degC, OK  # hw.sensors.esm0.temp0=35.00 degC (CPU 1), OK
 # hw.sensors.1=esm0, CPU 2, 37.00 degC, OK  # hw.sensors.esm0.temp1=35.00 degC (CPU 2), OK
 # hw.sensors.2=esm0, Mainboard, 29.50 degC, OK  # hw.sensors.esm0.temp2=29.00 degC (Mainboard), OK
 # hw.sensors.3=esm0, CPU 1 Core, 1.74 V DC, OK  # hw.sensors.esm0.temp3=22.00 degC (Ambient), OK
 # hw.sensors.4=esm0, CPU 2 Core, 1.73 V DC, OK  # hw.sensors.esm0.temp4=30.00 degC (Backplane Top), OK
 # hw.sensors.5=esm0, Motherboard +5V, 4.94 V DC, OK  # hw.sensors.esm0.temp5=30.00 degC (Backplane Bottom), OK
 # hw.sensors.6=esm0, Motherboard +12V, 11.90 V DC, OK  # hw.sensors.esm0.fan0=3828 RPM (Fan 1), OK
 # hw.sensors.7=esm0, Motherboard +3.3V, 3.22 V DC, OK  # hw.sensors.esm0.fan1=4011 RPM (Fan 2), OK
 # hw.sensors.8=esm0, Motherboard +2.5V, 2.49 V DC, OK  # hw.sensors.esm0.fan2=3662 RPM (Backplane Fan 1), OK
 # hw.sensors.9=esm0, Motherboard GTL Term, 1.49 V DC, OK  # hw.sensors.esm0.fan3=3514 RPM (Backplane Fan 2), OK
 # hw.sensors.10=esm0, Motherboard Battery, 2.98 V DC, OK  # hw.sensors.esm0.fan4=3475 RPM (Backplane Fan 3), OK
 # hw.sensors.11=esm0, Chassis Intrusion, Off  # hw.sensors.esm0.fan5=3784 RPM (Power Supply 1 Fan), OK
 hw.sensors.11:crit=Off  # hw.sensors.esm0.fan6=3478 RPM (Power Supply 2 Fan), OK
 # hw.sensors.12=esm0, Fan 1, 3586 RPM, OK  # hw.sensors.esm0.fan7=3120 RPM (Power Supply 3 Fan), OK
 # hw.sensors.13=esm0, Fan 2, 3539 RPM, OK  
 # hw.sensors.14=esm0, Fan 3, 3536 RPM, OK  # hw.sensors.esm0.fan8=0 RPM (Fan 1), CRITICAL
 # hw.sensors.15=esm0, Backplane, 0 raw  hw.sensors.esm0.fan8:ignore
 # hw.sensors.16=esm0, Backplane Top, 28.00 degC, OK  # hw.sensors.esm0.fan9=0 RPM (Fan 2), CRITICAL
 # hw.sensors.17=esm0, Backplane Bottom, 30.50 degC, OK  hw.sensors.esm0.fan9:ignore
 # hw.sensors.18=esm0, Backplane +5V, 4.94 V DC, OK  # hw.sensors.esm0.fan10=0 RPM (Fan 3), CRITICAL
 # hw.sensors.19=esm0, Backplane +12V, 11.81 V DC, OK  hw.sensors.esm0.fan10:ignore
 # hw.sensors.20=esm0, Backplane SCSI A Connected, On  # hw.sensors.esm0.fan11=0 RPM (Fan 4), CRITICAL
 hw.sensors.20:crit=On  hw.sensors.esm0.fan11:ignore
 # hw.sensors.21=esm0, Backplane SCSI A External, 4.61 V DC, OK  # hw.sensors.esm0.fan12=0 RPM (Fan 5), CRITICAL
 # hw.sensors.22=esm0, Backplane SCSI B Connected, Off  hw.sensors.esm0.fan12:ignore
 # hw.sensors.23=esm0, Drive 0, drive online  # hw.sensors.esm0.fan13=0 RPM (Fan 6), CRITICAL
 hw.sensors.23:crit=online  hw.sensors.esm0.fan13:ignore
 # hw.sensors.24=esm0, Drive 1, drive online  
 hw.sensors.24:crit=online  # hw.sensors.esm0.volt0=1.65 VDC (CPU 1 Core), OK
 # hw.sensors.25=esm0, Drive 2, drive online  # hw.sensors.esm0.volt1=1.66 VDC (CPU 2 Core), OK
 hw.sensors.25:crit=online  # hw.sensors.esm0.volt2=4.98 VDC (Motherboard +5V), OK
 # hw.sensors.26=esm0, Drive 3, drive online  # hw.sensors.esm0.volt3=11.95 VDC (Motherboard +12V), OK
 hw.sensors.26:crit=online  # hw.sensors.esm0.volt4=3.23 VDC (Motherboard +3.3V), OK
 # hw.sensors.27=esm0, Drive 4, drive online  # hw.sensors.esm0.volt5=2.49 VDC (Motherboard +2.5V), OK
 hw.sensors.27:crit=online  # hw.sensors.esm0.volt6=1.50 VDC (Motherboard GTL Term), OK
 # hw.sensors.28=esm0, Backplane Control 2, 1 raw  # hw.sensors.esm0.volt7=2.90 VDC (Motherboard Battery), OK
 # hw.sensors.29=esm0, Backplane +3.3V, 3.28 V DC, OK  # hw.sensors.esm0.volt8=4.97 VDC (Backplane +5V), OK
 # hw.sensors.30=ami0, sd0, drive online, OK  # hw.sensors.esm0.volt9=12.06 VDC (Backplane +12V), OK
 # hw.sensors.31=ami0, sd1, drive online, OK  # hw.sensors.esm0.volt10=2.83 VDC (Backplane Board), OK
 # hw.sensors.32=safte0, Temp0, 27.78 degC, OK  # hw.sensors.esm0.volt11=4.70 VDC (Backplane SCSI A External), OK
 # hw.sensors.33=safte0, Temp1, 30.56 degC, OK  # hw.sensors.esm0.volt12=4.78 VDC (Backplane SCSI A Internal), OK
   
   # hw.sensors.esm0.volt13=5.07 VDC (Power Supply 1 +5V)
   hw.sensors.esm0.volt13:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V
   # hw.sensors.esm0.volt14=12.12 VDC (Power Supply 1 +12V)
   hw.sensors.esm0.volt14:
   # hw.sensors.esm0.volt15=3.32 VDC (Power Supply 1 +3.3V)
   hw.sensors.esm0.volt15:
   # hw.sensors.esm0.volt16=5.08 VDC (Power Supply 1 -5V)
   hw.sensors.esm0.volt16:
   # hw.sensors.esm0.volt17=12.20 VDC (Power Supply 1 -12V)
   hw.sensors.esm0.volt17:
   
   # hw.sensors.esm0.volt18=5.09 VDC (Power Supply 2 +5V)
   hw.sensors.esm0.volt18:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V
   # hw.sensors.esm0.volt19=12.07 VDC (Power Supply 2 +12V)
   hw.sensors.esm0.volt19:
   # hw.sensors.esm0.volt20=3.34 VDC (Power Supply 2 +3.3V)
   hw.sensors.esm0.volt20:
   # hw.sensors.esm0.volt21=5.01 VDC (Power Supply 2 -5V)
   hw.sensors.esm0.volt21:
   # hw.sensors.esm0.volt22=12.03 VDC (Power Supply 2 -12V)
   hw.sensors.esm0.volt22:
   
   # hw.sensors.esm0.volt23=5.03 VDC (Power Supply 3 +5V)
   hw.sensors.esm0.volt23:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V
   # hw.sensors.esm0.volt24=12.13 VDC (Power Supply 3 +12V)
   hw.sensors.esm0.volt24:
   # hw.sensors.esm0.volt25=3.34 VDC (Power Supply 3 +3.3V)
   hw.sensors.esm0.volt25:
   # hw.sensors.esm0.volt26=5.03 VDC (Power Supply 3 -5V)
   hw.sensors.esm0.volt26:
   # hw.sensors.esm0.volt27=11.97 VDC (Power Supply 3 -12V)
   hw.sensors.esm0.volt27:
   
   # hw.sensors.esm0.volt28=5.02 VDC (System Power Supply +5V)
   hw.sensors.esm0.volt28:
   # hw.sensors.esm0.volt29=12.09 VDC (System Power Supply +12V)
   hw.sensors.esm0.volt29:
   # hw.sensors.esm0.volt30=3.32 VDC (System Power Supply +3.3V)
   hw.sensors.esm0.volt30:
   # hw.sensors.esm0.volt31=4.91 VDC (System Power Supply -5V)
   hw.sensors.esm0.volt31:
   # hw.sensors.esm0.volt32=11.82 VDC (System Power Supply -12V)
   hw.sensors.esm0.volt32:
   # hw.sensors.esm0.volt33=5.16 VDC (System Power Supply +5V aux)
   hw.sensors.esm0.volt33:
   
   # hw.sensors.esm0.current0=2.30 A (Power Supply 1 +5V), OK
   # hw.sensors.esm0.current1=0.90 A (Power Supply 1 +12V), OK
   # hw.sensors.esm0.current2=1.50 A (Power Supply 1 +3.3V), OK
   # hw.sensors.esm0.current3=1.90 A (Power Supply 2 +5V), OK
   # hw.sensors.esm0.current4=0.90 A (Power Supply 2 +12V), OK
   # hw.sensors.esm0.current5=1.50 A (Power Supply 2 +3.3V), OK
   # hw.sensors.esm0.current6=1.30 A (Power Supply 3 +5V), OK
   # hw.sensors.esm0.current7=0.90 A (Power Supply 3 +12V), OK
   # hw.sensors.esm0.current8=1.50 A (Power Supply 3 +3.3V), OK
   
   # hw.sensors.esm0.indicator0=Off (Chassis Intrusion)
   hw.sensors.esm0.indicator0:crit=Off
   # hw.sensors.esm0.indicator1=On (Backplane SCSI A Connected)
   hw.sensors.esm0.indicator1:crit=On
   
   # hw.sensors.esm0.indicator2=On (Power Supply 1 AC)
   hw.sensors.esm0.indicator2:crit=On
   # hw.sensors.esm0.indicator3=On (Power Supply 1 SW)
   hw.sensors.esm0.indicator3:crit=On
   # hw.sensors.esm0.indicator4=On (Power Supply 1 OK)
   hw.sensors.esm0.indicator4:crit=On
   # hw.sensors.esm0.indicator5=On (Power Supply 1 ON), OK
   # hw.sensors.esm0.indicator6=Off (Power Supply 1 FFAN)
   hw.sensors.esm0.indicator6:crit=Off
   # hw.sensors.esm0.indicator7=Off (Power Supply 1 OTMP)
   hw.sensors.esm0.indicator7:crit=Off
   
   # hw.sensors.esm0.indicator8=On (Power Supply 2 AC)
   hw.sensors.esm0.indicator8:crit=On
   # hw.sensors.esm0.indicator9=On (Power Supply 2 SW)
   hw.sensors.esm0.indicator9:crit=On
   # hw.sensors.esm0.indicator10=On (Power Supply 2 OK)
   hw.sensors.esm0.indicator10:crit=On
   # hw.sensors.esm0.indicator11=On (Power Supply 2 ON), OK
   # hw.sensors.esm0.indicator12=Off (Power Supply 2 FFAN)
   hw.sensors.esm0.indicator12:crit=Off
   # hw.sensors.esm0.indicator13=Off (Power Supply 2 OTMP)
   hw.sensors.esm0.indicator13:crit=Off
   
   # hw.sensors.esm0.indicator14=On (Power Supply 3 AC)
   hw.sensors.esm0.indicator14:crit=On
   # hw.sensors.esm0.indicator15=On (Power Supply 3 SW)
   hw.sensors.esm0.indicator15:crit=On
   # hw.sensors.esm0.indicator16=On (Power Supply 3 OK)
   hw.sensors.esm0.indicator16:crit=On
   # hw.sensors.esm0.indicator17=On (Power Supply 3 ON), OK
   # hw.sensors.esm0.indicator18=Off (Power Supply 3 FFAN)
   hw.sensors.esm0.indicator18:crit=Off
   # hw.sensors.esm0.indicator19=Off (Power Supply 3 OTMP)
   hw.sensors.esm0.indicator19:crit=Off
   
   # hw.sensors.esm0.raw0=2 (Chassis Fan Ctrl)
   # hw.sensors.esm0.raw1=227 (Backplane Control)
   # hw.sensors.esm0.raw2=8738 (Backplane Fan Control)
   # hw.sensors.esm0.raw3=42498 (Fan Enclosure)
   
   # hw.sensors.esm0.drive0=online (Drive 0)
   hw.sensors.esm0.drive0:crit=online
   # hw.sensors.esm0.drive1=online (Drive 1)
   hw.sensors.esm0.drive1:crit=online
   # hw.sensors.esm0.drive2=unknown (Drive 2)
   hw.sensors.esm0.drive2:crit=unknown
   # hw.sensors.esm0.drive3=unknown (Drive 3)
   hw.sensors.esm0.drive3:crit=unknown
   # hw.sensors.esm0.drive4=online (Drive 4)
   hw.sensors.esm0.drive4:crit=online
   # hw.sensors.esm0.drive5=online (Drive 5)
   hw.sensors.esm0.drive5:crit=online
   # hw.sensors.esm0.drive6=unknown (Drive 6)
   hw.sensors.esm0.drive6:crit=unknown
   # hw.sensors.esm0.drive7=unknown (Drive 7)
   hw.sensors.esm0.drive7:crit=unknown
   
   # hw.sensors.ami0.drive0=online (sd0), OK
   # hw.sensors.ami0.drive1=online (sd1), OK
   # hw.sensors.safte0.temp0=30.00 degC, OK
   # hw.sensors.safte0.temp1=30.00 degC, OK
   # hw.sensors.safte0.indicator0=On (Fan0), OK
   # hw.sensors.safte0.indicator1=On (Fan1), OK
   # hw.sensors.safte0.indicator2=On (Fan2), OK
Legend:
Removed from v.1.6  
changed lines
  Added in v.1.7
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>