| version 1.1, 2006/05/03 22:48:42 |
version 1.6, 2006/12/05 16:26:27 |
|
|
| # $OpenBSD$ |
|
| # $RedRiver$ |
# $RedRiver$ |
| |
# hw.sensors.0=esm0, CPU 1, 39.00 degC, OK |
| # |
# hw.sensors.1=esm0, CPU 2, 37.00 degC, OK |
| # Sample sensorsd.conf file. See sensorsd.conf(5) for details. |
# hw.sensors.2=esm0, Mainboard, 29.50 degC, OK |
| # This one has examples for use with nagios check_hw_sensors |
# hw.sensors.3=esm0, CPU 1 Core, 1.74 V DC, OK |
| # Actual sensors on a 2450 are below. |
# hw.sensors.4=esm0, CPU 2 Core, 1.73 V DC, OK |
| # |
# hw.sensors.5=esm0, Motherboard +5V, 4.94 V DC, OK |
| |
# hw.sensors.6=esm0, Motherboard +12V, 11.90 V DC, OK |
| # hw.sensors.0=esm0, Motherboard, raw, 0 |
# hw.sensors.7=esm0, Motherboard +3.3V, 3.22 V DC, OK |
| # hw.sensors.1=esm0, CPU 1, OK, temp, 28.00 degC / 82.40 degF |
# hw.sensors.8=esm0, Motherboard +2.5V, 2.49 V DC, OK |
| hw.sensors.1:high=50C:warn.high=40C |
# hw.sensors.9=esm0, Motherboard GTL Term, 1.49 V DC, OK |
| |
# hw.sensors.10=esm0, Motherboard Battery, 2.98 V DC, OK |
| # hw.sensors.2=esm0, CPU 2, OK, temp, 30.00 degC / 86.00 degF |
# hw.sensors.11=esm0, Chassis Intrusion, Off |
| hw.sensors.2:high=50C:warn.high=40C |
hw.sensors.11:crit=Off |
| |
# hw.sensors.12=esm0, Fan 1, 3586 RPM, OK |
| # hw.sensors.3=esm0, Mainboard, OK, temp, 21.50 degC / 70.70 degF |
# hw.sensors.13=esm0, Fan 2, 3539 RPM, OK |
| hw.sensors.3:high=40C:warn.high=30C |
# hw.sensors.14=esm0, Fan 3, 3536 RPM, OK |
| |
# hw.sensors.15=esm0, Backplane, 0 raw |
| # hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V |
# hw.sensors.16=esm0, Backplane Top, 28.00 degC, OK |
| hw.sensors.4:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V |
# hw.sensors.17=esm0, Backplane Bottom, 30.50 degC, OK |
| |
# hw.sensors.18=esm0, Backplane +5V, 4.94 V DC, OK |
| # hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V |
# hw.sensors.19=esm0, Backplane +12V, 11.81 V DC, OK |
| hw.sensors.5:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V |
# hw.sensors.20=esm0, Backplane SCSI A Connected, On |
| |
hw.sensors.20:crit=On |
| # hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V |
# hw.sensors.21=esm0, Backplane SCSI A External, 4.61 V DC, OK |
| hw.sensors.6:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V |
# hw.sensors.22=esm0, Backplane SCSI B Connected, Off |
| |
# hw.sensors.23=esm0, Drive 0, drive online |
| # hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.94 V |
hw.sensors.23:crit=online |
| hw.sensors.7:high=12.15V:warn.high=12.1V:low=11.8V:warn.low=11.85V |
# hw.sensors.24=esm0, Drive 1, drive online |
| |
hw.sensors.24:crit=online |
| # hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V |
# hw.sensors.25=esm0, Drive 2, drive online |
| hw.sensors.8:high=3.5V:warn.high=3.4V:low=3.15V:warn.low=3.2V |
hw.sensors.25:crit=online |
| |
# hw.sensors.26=esm0, Drive 3, drive online |
| # hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V |
hw.sensors.26:crit=online |
| hw.sensors.9:high=2.75V:warn.high=2.6V:low=2.25V:warn.low=2.4V |
# hw.sensors.27=esm0, Drive 4, drive online |
| |
hw.sensors.27:crit=online |
| # hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V |
# hw.sensors.28=esm0, Backplane Control 2, 1 raw |
| hw.sensors.10:high=1.75V:warn.high=1.6V:low=1.25V:warn.low=1.4V |
# hw.sensors.29=esm0, Backplane +3.3V, 3.28 V DC, OK |
| |
# hw.sensors.30=ami0, sd0, drive online, OK |
| # hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.93 V |
# hw.sensors.31=ami0, sd1, drive online, OK |
| hw.sensors.11:high=3.1V:warn.high=3.05V:low=2.75V:warn.low=2.8V |
# hw.sensors.32=safte0, Temp0, 27.78 degC, OK |
| |
# hw.sensors.33=safte0, Temp1, 30.56 degC, OK |
| # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off |
|
| hw.sensors.12:crit=Off:warn=Off |
|
| |
|
| # hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3526 RPM |
|
| hw.sensors.13:low=3000:warn.low=3250 |
|
| |
|
| # hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3569 RPM |
|
| hw.sensors.14:low=3000:warn.low=3250 |
|
| |
|
| # hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3563 RPM |
|
| hw.sensors.15:low=3000:warn.low=3250 |
|
| |
|
| # hw.sensors.16=esm0, Backplane, raw, 0 |
|
| # hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF |
|
| hw.sensors.17:high=35C:warn.high=25C |
|
| |
|
| # hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.00 degC / 71.60 degF |
|
| hw.sensors.18:high=40C:warn.high=30C |
|
| |
|
| # hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V |
|
| hw.sensors.19:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V |
|
| |
|
| # hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On |
|
| hw.sensors.20:crit=On:warn=On |
|
| |
|
| # hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V |
|
| hw.sensors.21:high=5.1V:warn.high=5.05V:low=4.60V:warn.low=4.65V |
|
| |
|
| # hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off |
|
| hw.sensors.22:crit=Off:warn=Off |
|
| |
|
| # hw.sensors.23=esm0, Drive 0, drive, online |
|
| hw.sensors.23:crit=online,empty:warn=online |
|
| |
|
| # hw.sensors.24=esm0, Drive 1, drive, online |
|
| hw.sensors.24:crit=online,empty:warn=online |
|
| |
|
| # hw.sensors.25=esm0, Drive 2, drive, empty |
|
| hw.sensors.25:crit=online,empty:warn=online,empty |
|
| |
|
| # hw.sensors.26=esm0, Drive 3, drive, empty |
|
| hw.sensors.26:crit=online,empty:warn=online,empty |
|
| |
|
| # hw.sensors.27=esm0, Backplane Control 2, raw, 17 |
|
| # hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V |
|
| hw.sensors.28:high=3.5V:warn.high=3.4V:low=3.2V:warn.low=3.25V |
|
| |
|
| # hw.sensors.29=safte0, temp0, OK, temp, 14.44 degC / 58.00 degF |
|
| hw.sensors.29:high=35C:warn.high=25C |
|
| |
|
| # hw.sensors.30=safte0, temp1, OK, temp, 22.22 degC / 72.00 degF |
|
| hw.sensors.30:high=40C:warn.high=30C |
|
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to sensorsd.conf CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / nagios / check_hw_sensors