| version 1.5, 2006/10/26 00:30:23 |
version 1.7, 2008/03/10 17:24:06 |
|
|
| # $RedRiver: sensorsd.conf,v 1.4 2006/10/25 23:21:03 andrew Exp $ |
# $RedRiver$ |
| # hw.sensors.3=esm0, Ambient, OK, temp, 21.50 degC / 70.70 degF |
# hw.sensors.esm0.temp0=35.00 degC (CPU 1), OK |
| hw.sensors.3:high=28C:warn.high=25C |
# hw.sensors.esm0.temp1=35.00 degC (CPU 2), OK |
| |
# hw.sensors.esm0.temp2=29.00 degC (Mainboard), OK |
| |
# hw.sensors.esm0.temp3=22.00 degC (Ambient), OK |
| |
# hw.sensors.esm0.temp4=30.00 degC (Backplane Top), OK |
| |
# hw.sensors.esm0.temp5=30.00 degC (Backplane Bottom), OK |
| |
# hw.sensors.esm0.fan0=3828 RPM (Fan 1), OK |
| |
# hw.sensors.esm0.fan1=4011 RPM (Fan 2), OK |
| |
# hw.sensors.esm0.fan2=3662 RPM (Backplane Fan 1), OK |
| |
# hw.sensors.esm0.fan3=3514 RPM (Backplane Fan 2), OK |
| |
# hw.sensors.esm0.fan4=3475 RPM (Backplane Fan 3), OK |
| |
# hw.sensors.esm0.fan5=3784 RPM (Power Supply 1 Fan), OK |
| |
# hw.sensors.esm0.fan6=3478 RPM (Power Supply 2 Fan), OK |
| |
# hw.sensors.esm0.fan7=3120 RPM (Power Supply 3 Fan), OK |
| |
|
| # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off |
# hw.sensors.esm0.fan8=0 RPM (Fan 1), CRITICAL |
| hw.sensors.12:warn=Off |
hw.sensors.esm0.fan8:ignore |
| |
# hw.sensors.esm0.fan9=0 RPM (Fan 2), CRITICAL |
| |
hw.sensors.esm0.fan9:ignore |
| |
# hw.sensors.esm0.fan10=0 RPM (Fan 3), CRITICAL |
| |
hw.sensors.esm0.fan10:ignore |
| |
# hw.sensors.esm0.fan11=0 RPM (Fan 4), CRITICAL |
| |
hw.sensors.esm0.fan11:ignore |
| |
# hw.sensors.esm0.fan12=0 RPM (Fan 5), CRITICAL |
| |
hw.sensors.esm0.fan12:ignore |
| |
# hw.sensors.esm0.fan13=0 RPM (Fan 6), CRITICAL |
| |
hw.sensors.esm0.fan13:ignore |
| |
|
| # hw.sensors.29=esm0, Drive 0, drive, online |
# hw.sensors.esm0.volt0=1.65 VDC (CPU 1 Core), OK |
| hw.sensors.29:crit=online |
# hw.sensors.esm0.volt1=1.66 VDC (CPU 2 Core), OK |
| # hw.sensors.30=esm0, Drive 1, drive, online |
# hw.sensors.esm0.volt2=4.98 VDC (Motherboard +5V), OK |
| hw.sensors.30:crit=online |
# hw.sensors.esm0.volt3=11.95 VDC (Motherboard +12V), OK |
| # hw.sensors.31=esm0, Drive 2, drive, unknown |
# hw.sensors.esm0.volt4=3.23 VDC (Motherboard +3.3V), OK |
| # hw.sensors.32=esm0, Drive 3, drive, unknown |
# hw.sensors.esm0.volt5=2.49 VDC (Motherboard +2.5V), OK |
| # hw.sensors.33=esm0, Drive 4, drive, online |
# hw.sensors.esm0.volt6=1.50 VDC (Motherboard GTL Term), OK |
| hw.sensors.33:crit=online |
# hw.sensors.esm0.volt7=2.90 VDC (Motherboard Battery), OK |
| # hw.sensors.34=esm0, Drive 5, drive, online |
# hw.sensors.esm0.volt8=4.97 VDC (Backplane +5V), OK |
| hw.sensors.34:crit=online |
# hw.sensors.esm0.volt9=12.06 VDC (Backplane +12V), OK |
| # hw.sensors.35=esm0, Drive 6, drive, unknown |
# hw.sensors.esm0.volt10=2.83 VDC (Backplane Board), OK |
| # hw.sensors.36=esm0, Drive 7, drive, unknown |
# hw.sensors.esm0.volt11=4.70 VDC (Backplane SCSI A External), OK |
| |
# hw.sensors.esm0.volt12=4.78 VDC (Backplane SCSI A Internal), OK |
| |
|
| # hw.sensors.70=esm0, Power Supply 1 AC, indicator, On |
# hw.sensors.esm0.volt13=5.07 VDC (Power Supply 1 +5V) |
| hw.sensors.70:crit=On |
hw.sensors.esm0.volt13:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V |
| # hw.sensors.71=esm0, Power Supply 1 SW, indicator, On |
# hw.sensors.esm0.volt14=12.12 VDC (Power Supply 1 +12V) |
| hw.sensors.71:crit=On |
hw.sensors.esm0.volt14: |
| # hw.sensors.72=esm0, Power Supply 1 OK, indicator, On |
# hw.sensors.esm0.volt15=3.32 VDC (Power Supply 1 +3.3V) |
| hw.sensors.72:crit=On |
hw.sensors.esm0.volt15: |
| # hw.sensors.74=esm0, Power Supply 1 FFAN, indicator, Off |
# hw.sensors.esm0.volt16=5.08 VDC (Power Supply 1 -5V) |
| hw.sensors.74:crit=Off |
hw.sensors.esm0.volt16: |
| # hw.sensors.75=esm0, Power Supply 1 OTMP, indicator, Off |
# hw.sensors.esm0.volt17=12.20 VDC (Power Supply 1 -12V) |
| hw.sensors.75:crit=Off |
hw.sensors.esm0.volt17: |
| |
|
| # hw.sensors.76=esm0, Power Supply 2 AC, indicator, On |
# hw.sensors.esm0.volt18=5.09 VDC (Power Supply 2 +5V) |
| hw.sensors.76:crit=On |
hw.sensors.esm0.volt18:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V |
| # hw.sensors.77=esm0, Power Supply 2 SW, indicator, On |
# hw.sensors.esm0.volt19=12.07 VDC (Power Supply 2 +12V) |
| hw.sensors.77:crit=On |
hw.sensors.esm0.volt19: |
| # hw.sensors.78=esm0, Power Supply 2 OK, indicator, On |
# hw.sensors.esm0.volt20=3.34 VDC (Power Supply 2 +3.3V) |
| hw.sensors.78:crit=On |
hw.sensors.esm0.volt20: |
| # hw.sensors.80=esm0, Power Supply 2 FFAN, indicator, Off |
# hw.sensors.esm0.volt21=5.01 VDC (Power Supply 2 -5V) |
| hw.sensors.80:crit=Off |
hw.sensors.esm0.volt21: |
| # hw.sensors.81=esm0, Power Supply 2 OTMP, indicator, Off |
# hw.sensors.esm0.volt22=12.03 VDC (Power Supply 2 -12V) |
| hw.sensors.81:crit=Off |
hw.sensors.esm0.volt22: |
| |
|
| # hw.sensors.82=esm0, Power Supply 3 AC, indicator, On |
# hw.sensors.esm0.volt23=5.03 VDC (Power Supply 3 +5V) |
| hw.sensors.82:crit=On |
hw.sensors.esm0.volt23:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V |
| # hw.sensors.83=esm0, Power Supply 3 SW, indicator, On |
# hw.sensors.esm0.volt24=12.13 VDC (Power Supply 3 +12V) |
| hw.sensors.83:crit=On |
hw.sensors.esm0.volt24: |
| # hw.sensors.84=esm0, Power Supply 3 OK, indicator, On |
# hw.sensors.esm0.volt25=3.34 VDC (Power Supply 3 +3.3V) |
| hw.sensors.84:crit=On |
hw.sensors.esm0.volt25: |
| # hw.sensors.86=esm0, Power Supply 3 FFAN, indicator, Off |
# hw.sensors.esm0.volt26=5.03 VDC (Power Supply 3 -5V) |
| hw.sensors.86:crit=Off |
hw.sensors.esm0.volt26: |
| # hw.sensors.87=esm0, Power Supply 3 OTMP, indicator, Off |
# hw.sensors.esm0.volt27=11.97 VDC (Power Supply 3 -12V) |
| hw.sensors.87:crit=Off |
hw.sensors.esm0.volt27: |
| |
|
| # hw.sensors.88=esm0, Fan 1, CRITICAL, fanrpm, 0 RPM |
# hw.sensors.esm0.volt28=5.02 VDC (System Power Supply +5V) |
| hw.sensors.88:ignore |
hw.sensors.esm0.volt28: |
| # hw.sensors.89=esm0, Fan 2, CRITICAL, fanrpm, 0 RPM |
# hw.sensors.esm0.volt29=12.09 VDC (System Power Supply +12V) |
| hw.sensors.89:ignore |
hw.sensors.esm0.volt29: |
| # hw.sensors.90=esm0, Fan 3, CRITICAL, fanrpm, 0 RPM |
# hw.sensors.esm0.volt30=3.32 VDC (System Power Supply +3.3V) |
| hw.sensors.90:ignore |
hw.sensors.esm0.volt30: |
| # hw.sensors.91=esm0, Fan 4, CRITICAL, fanrpm, 0 RPM |
# hw.sensors.esm0.volt31=4.91 VDC (System Power Supply -5V) |
| hw.sensors.91:ignore |
hw.sensors.esm0.volt31: |
| # hw.sensors.92=esm0, Fan 5, CRITICAL, fanrpm, 0 RPM |
# hw.sensors.esm0.volt32=11.82 VDC (System Power Supply -12V) |
| hw.sensors.92:ignore |
hw.sensors.esm0.volt32: |
| # hw.sensors.93=esm0, Fan 6, CRITICAL, fanrpm, 0 RPM |
# hw.sensors.esm0.volt33=5.16 VDC (System Power Supply +5V aux) |
| hw.sensors.93:ignore |
hw.sensors.esm0.volt33: |
| |
|
| |
# hw.sensors.esm0.current0=2.30 A (Power Supply 1 +5V), OK |
| |
# hw.sensors.esm0.current1=0.90 A (Power Supply 1 +12V), OK |
| |
# hw.sensors.esm0.current2=1.50 A (Power Supply 1 +3.3V), OK |
| |
# hw.sensors.esm0.current3=1.90 A (Power Supply 2 +5V), OK |
| |
# hw.sensors.esm0.current4=0.90 A (Power Supply 2 +12V), OK |
| |
# hw.sensors.esm0.current5=1.50 A (Power Supply 2 +3.3V), OK |
| |
# hw.sensors.esm0.current6=1.30 A (Power Supply 3 +5V), OK |
| |
# hw.sensors.esm0.current7=0.90 A (Power Supply 3 +12V), OK |
| |
# hw.sensors.esm0.current8=1.50 A (Power Supply 3 +3.3V), OK |
| |
|
| |
# hw.sensors.esm0.indicator0=Off (Chassis Intrusion) |
| |
hw.sensors.esm0.indicator0:crit=Off |
| |
# hw.sensors.esm0.indicator1=On (Backplane SCSI A Connected) |
| |
hw.sensors.esm0.indicator1:crit=On |
| |
|
| |
# hw.sensors.esm0.indicator2=On (Power Supply 1 AC) |
| |
hw.sensors.esm0.indicator2:crit=On |
| |
# hw.sensors.esm0.indicator3=On (Power Supply 1 SW) |
| |
hw.sensors.esm0.indicator3:crit=On |
| |
# hw.sensors.esm0.indicator4=On (Power Supply 1 OK) |
| |
hw.sensors.esm0.indicator4:crit=On |
| |
# hw.sensors.esm0.indicator5=On (Power Supply 1 ON), OK |
| |
# hw.sensors.esm0.indicator6=Off (Power Supply 1 FFAN) |
| |
hw.sensors.esm0.indicator6:crit=Off |
| |
# hw.sensors.esm0.indicator7=Off (Power Supply 1 OTMP) |
| |
hw.sensors.esm0.indicator7:crit=Off |
| |
|
| |
# hw.sensors.esm0.indicator8=On (Power Supply 2 AC) |
| |
hw.sensors.esm0.indicator8:crit=On |
| |
# hw.sensors.esm0.indicator9=On (Power Supply 2 SW) |
| |
hw.sensors.esm0.indicator9:crit=On |
| |
# hw.sensors.esm0.indicator10=On (Power Supply 2 OK) |
| |
hw.sensors.esm0.indicator10:crit=On |
| |
# hw.sensors.esm0.indicator11=On (Power Supply 2 ON), OK |
| |
# hw.sensors.esm0.indicator12=Off (Power Supply 2 FFAN) |
| |
hw.sensors.esm0.indicator12:crit=Off |
| |
# hw.sensors.esm0.indicator13=Off (Power Supply 2 OTMP) |
| |
hw.sensors.esm0.indicator13:crit=Off |
| |
|
| |
# hw.sensors.esm0.indicator14=On (Power Supply 3 AC) |
| |
hw.sensors.esm0.indicator14:crit=On |
| |
# hw.sensors.esm0.indicator15=On (Power Supply 3 SW) |
| |
hw.sensors.esm0.indicator15:crit=On |
| |
# hw.sensors.esm0.indicator16=On (Power Supply 3 OK) |
| |
hw.sensors.esm0.indicator16:crit=On |
| |
# hw.sensors.esm0.indicator17=On (Power Supply 3 ON), OK |
| |
# hw.sensors.esm0.indicator18=Off (Power Supply 3 FFAN) |
| |
hw.sensors.esm0.indicator18:crit=Off |
| |
# hw.sensors.esm0.indicator19=Off (Power Supply 3 OTMP) |
| |
hw.sensors.esm0.indicator19:crit=Off |
| |
|
| |
# hw.sensors.esm0.raw0=2 (Chassis Fan Ctrl) |
| |
# hw.sensors.esm0.raw1=227 (Backplane Control) |
| |
# hw.sensors.esm0.raw2=8738 (Backplane Fan Control) |
| |
# hw.sensors.esm0.raw3=42498 (Fan Enclosure) |
| |
|
| |
# hw.sensors.esm0.drive0=online (Drive 0) |
| |
hw.sensors.esm0.drive0:crit=online |
| |
# hw.sensors.esm0.drive1=online (Drive 1) |
| |
hw.sensors.esm0.drive1:crit=online |
| |
# hw.sensors.esm0.drive2=unknown (Drive 2) |
| |
hw.sensors.esm0.drive2:crit=unknown |
| |
# hw.sensors.esm0.drive3=unknown (Drive 3) |
| |
hw.sensors.esm0.drive3:crit=unknown |
| |
# hw.sensors.esm0.drive4=online (Drive 4) |
| |
hw.sensors.esm0.drive4:crit=online |
| |
# hw.sensors.esm0.drive5=online (Drive 5) |
| |
hw.sensors.esm0.drive5:crit=online |
| |
# hw.sensors.esm0.drive6=unknown (Drive 6) |
| |
hw.sensors.esm0.drive6:crit=unknown |
| |
# hw.sensors.esm0.drive7=unknown (Drive 7) |
| |
hw.sensors.esm0.drive7:crit=unknown |
| |
|
| |
# hw.sensors.ami0.drive0=online (sd0), OK |
| |
# hw.sensors.ami0.drive1=online (sd1), OK |
| |
# hw.sensors.safte0.temp0=30.00 degC, OK |
| |
# hw.sensors.safte0.temp1=30.00 degC, OK |
| |
# hw.sensors.safte0.indicator0=On (Fan0), OK |
| |
# hw.sensors.safte0.indicator1=On (Fan1), OK |
| |
# hw.sensors.safte0.indicator2=On (Fan2), OK |
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to sensorsd.conf CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / nagios / check_hw_sensors