| version 1.1, 2006/05/03 22:48:42 |
version 1.5, 2006/10/26 00:30:23 |
|
|
| # $OpenBSD$ |
# $RedRiver: sensorsd.conf,v 1.4 2006/10/25 23:21:03 andrew Exp $ |
| # $RedRiver$ |
# hw.sensors.3=esm0, Ambient, OK, temp, 21.50 degC / 70.70 degF |
| |
hw.sensors.3:high=28C:warn.high=25C |
| |
|
| # |
|
| # Sample sensorsd.conf file. See sensorsd.conf(5) for details. |
|
| # This one has examples for use with nagios check_hw_sensors |
|
| # Actual sensors on a 2450 are below. |
|
| # |
|
| |
|
| # hw.sensors.0=esm0, Motherboard, raw, 0 |
|
| # hw.sensors.1=esm0, CPU 1, OK, temp, 28.00 degC / 82.40 degF |
|
| hw.sensors.1:high=50C:warn.high=40C |
|
| |
|
| # hw.sensors.2=esm0, CPU 2, OK, temp, 30.00 degC / 86.00 degF |
|
| hw.sensors.2:high=50C:warn.high=40C |
|
| |
|
| # hw.sensors.3=esm0, Mainboard, OK, temp, 21.50 degC / 70.70 degF |
|
| hw.sensors.3:high=40C:warn.high=30C |
|
| |
|
| # hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V |
|
| hw.sensors.4:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V |
|
| |
|
| # hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V |
|
| hw.sensors.5:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V |
|
| |
|
| # hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V |
|
| hw.sensors.6:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V |
|
| |
|
| # hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.94 V |
|
| hw.sensors.7:high=12.15V:warn.high=12.1V:low=11.8V:warn.low=11.85V |
|
| |
|
| # hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V |
|
| hw.sensors.8:high=3.5V:warn.high=3.4V:low=3.15V:warn.low=3.2V |
|
| |
|
| # hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V |
|
| hw.sensors.9:high=2.75V:warn.high=2.6V:low=2.25V:warn.low=2.4V |
|
| |
|
| # hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V |
|
| hw.sensors.10:high=1.75V:warn.high=1.6V:low=1.25V:warn.low=1.4V |
|
| |
|
| # hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.93 V |
|
| hw.sensors.11:high=3.1V:warn.high=3.05V:low=2.75V:warn.low=2.8V |
|
| |
|
| # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off |
# hw.sensors.12=esm0, Chassis Intrusion, indicator, Off |
| hw.sensors.12:crit=Off:warn=Off |
hw.sensors.12:warn=Off |
| |
|
| # hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3526 RPM |
# hw.sensors.29=esm0, Drive 0, drive, online |
| hw.sensors.13:low=3000:warn.low=3250 |
hw.sensors.29:crit=online |
| |
# hw.sensors.30=esm0, Drive 1, drive, online |
| |
hw.sensors.30:crit=online |
| |
# hw.sensors.31=esm0, Drive 2, drive, unknown |
| |
# hw.sensors.32=esm0, Drive 3, drive, unknown |
| |
# hw.sensors.33=esm0, Drive 4, drive, online |
| |
hw.sensors.33:crit=online |
| |
# hw.sensors.34=esm0, Drive 5, drive, online |
| |
hw.sensors.34:crit=online |
| |
# hw.sensors.35=esm0, Drive 6, drive, unknown |
| |
# hw.sensors.36=esm0, Drive 7, drive, unknown |
| |
|
| # hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3569 RPM |
# hw.sensors.70=esm0, Power Supply 1 AC, indicator, On |
| hw.sensors.14:low=3000:warn.low=3250 |
hw.sensors.70:crit=On |
| |
# hw.sensors.71=esm0, Power Supply 1 SW, indicator, On |
| |
hw.sensors.71:crit=On |
| |
# hw.sensors.72=esm0, Power Supply 1 OK, indicator, On |
| |
hw.sensors.72:crit=On |
| |
# hw.sensors.74=esm0, Power Supply 1 FFAN, indicator, Off |
| |
hw.sensors.74:crit=Off |
| |
# hw.sensors.75=esm0, Power Supply 1 OTMP, indicator, Off |
| |
hw.sensors.75:crit=Off |
| |
|
| # hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3563 RPM |
# hw.sensors.76=esm0, Power Supply 2 AC, indicator, On |
| hw.sensors.15:low=3000:warn.low=3250 |
hw.sensors.76:crit=On |
| |
# hw.sensors.77=esm0, Power Supply 2 SW, indicator, On |
| |
hw.sensors.77:crit=On |
| |
# hw.sensors.78=esm0, Power Supply 2 OK, indicator, On |
| |
hw.sensors.78:crit=On |
| |
# hw.sensors.80=esm0, Power Supply 2 FFAN, indicator, Off |
| |
hw.sensors.80:crit=Off |
| |
# hw.sensors.81=esm0, Power Supply 2 OTMP, indicator, Off |
| |
hw.sensors.81:crit=Off |
| |
|
| # hw.sensors.16=esm0, Backplane, raw, 0 |
# hw.sensors.82=esm0, Power Supply 3 AC, indicator, On |
| # hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF |
hw.sensors.82:crit=On |
| hw.sensors.17:high=35C:warn.high=25C |
# hw.sensors.83=esm0, Power Supply 3 SW, indicator, On |
| |
hw.sensors.83:crit=On |
| |
# hw.sensors.84=esm0, Power Supply 3 OK, indicator, On |
| |
hw.sensors.84:crit=On |
| |
# hw.sensors.86=esm0, Power Supply 3 FFAN, indicator, Off |
| |
hw.sensors.86:crit=Off |
| |
# hw.sensors.87=esm0, Power Supply 3 OTMP, indicator, Off |
| |
hw.sensors.87:crit=Off |
| |
|
| # hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.00 degC / 71.60 degF |
# hw.sensors.88=esm0, Fan 1, CRITICAL, fanrpm, 0 RPM |
| hw.sensors.18:high=40C:warn.high=30C |
hw.sensors.88:ignore |
| |
# hw.sensors.89=esm0, Fan 2, CRITICAL, fanrpm, 0 RPM |
| # hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V |
hw.sensors.89:ignore |
| hw.sensors.19:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V |
# hw.sensors.90=esm0, Fan 3, CRITICAL, fanrpm, 0 RPM |
| |
hw.sensors.90:ignore |
| # hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On |
# hw.sensors.91=esm0, Fan 4, CRITICAL, fanrpm, 0 RPM |
| hw.sensors.20:crit=On:warn=On |
hw.sensors.91:ignore |
| |
# hw.sensors.92=esm0, Fan 5, CRITICAL, fanrpm, 0 RPM |
| # hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V |
hw.sensors.92:ignore |
| hw.sensors.21:high=5.1V:warn.high=5.05V:low=4.60V:warn.low=4.65V |
# hw.sensors.93=esm0, Fan 6, CRITICAL, fanrpm, 0 RPM |
| |
hw.sensors.93:ignore |
| # hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off |
|
| hw.sensors.22:crit=Off:warn=Off |
|
| |
|
| # hw.sensors.23=esm0, Drive 0, drive, online |
|
| hw.sensors.23:crit=online,empty:warn=online |
|
| |
|
| # hw.sensors.24=esm0, Drive 1, drive, online |
|
| hw.sensors.24:crit=online,empty:warn=online |
|
| |
|
| # hw.sensors.25=esm0, Drive 2, drive, empty |
|
| hw.sensors.25:crit=online,empty:warn=online,empty |
|
| |
|
| # hw.sensors.26=esm0, Drive 3, drive, empty |
|
| hw.sensors.26:crit=online,empty:warn=online,empty |
|
| |
|
| # hw.sensors.27=esm0, Backplane Control 2, raw, 17 |
|
| # hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V |
|
| hw.sensors.28:high=3.5V:warn.high=3.4V:low=3.2V:warn.low=3.25V |
|
| |
|
| # hw.sensors.29=safte0, temp0, OK, temp, 14.44 degC / 58.00 degF |
|
| hw.sensors.29:high=35C:warn.high=25C |
|
| |
|
| # hw.sensors.30=safte0, temp1, OK, temp, 22.22 degC / 72.00 degF |
|
| hw.sensors.30:high=40C:warn.high=30C |
|
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to sensorsd.conf CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / nagios / check_hw_sensors