| version 1.1, 2006/05/03 22:48:42 |
version 1.7, 2008/03/10 17:24:06 |
|
|
| # $OpenBSD$ |
|
| # $RedRiver$ |
# $RedRiver$ |
| |
# hw.sensors.esm0.temp0=35.00 degC (CPU 1), OK |
| |
# hw.sensors.esm0.temp1=35.00 degC (CPU 2), OK |
| |
# hw.sensors.esm0.temp2=29.00 degC (Mainboard), OK |
| |
# hw.sensors.esm0.temp3=22.00 degC (Ambient), OK |
| |
# hw.sensors.esm0.temp4=30.00 degC (Backplane Top), OK |
| |
# hw.sensors.esm0.temp5=30.00 degC (Backplane Bottom), OK |
| |
# hw.sensors.esm0.fan0=3828 RPM (Fan 1), OK |
| |
# hw.sensors.esm0.fan1=4011 RPM (Fan 2), OK |
| |
# hw.sensors.esm0.fan2=3662 RPM (Backplane Fan 1), OK |
| |
# hw.sensors.esm0.fan3=3514 RPM (Backplane Fan 2), OK |
| |
# hw.sensors.esm0.fan4=3475 RPM (Backplane Fan 3), OK |
| |
# hw.sensors.esm0.fan5=3784 RPM (Power Supply 1 Fan), OK |
| |
# hw.sensors.esm0.fan6=3478 RPM (Power Supply 2 Fan), OK |
| |
# hw.sensors.esm0.fan7=3120 RPM (Power Supply 3 Fan), OK |
| |
|
| # |
# hw.sensors.esm0.fan8=0 RPM (Fan 1), CRITICAL |
| # Sample sensorsd.conf file. See sensorsd.conf(5) for details. |
hw.sensors.esm0.fan8:ignore |
| # This one has examples for use with nagios check_hw_sensors |
# hw.sensors.esm0.fan9=0 RPM (Fan 2), CRITICAL |
| # Actual sensors on a 2450 are below. |
hw.sensors.esm0.fan9:ignore |
| # |
# hw.sensors.esm0.fan10=0 RPM (Fan 3), CRITICAL |
| |
hw.sensors.esm0.fan10:ignore |
| |
# hw.sensors.esm0.fan11=0 RPM (Fan 4), CRITICAL |
| |
hw.sensors.esm0.fan11:ignore |
| |
# hw.sensors.esm0.fan12=0 RPM (Fan 5), CRITICAL |
| |
hw.sensors.esm0.fan12:ignore |
| |
# hw.sensors.esm0.fan13=0 RPM (Fan 6), CRITICAL |
| |
hw.sensors.esm0.fan13:ignore |
| |
|
| # hw.sensors.0=esm0, Motherboard, raw, 0 |
# hw.sensors.esm0.volt0=1.65 VDC (CPU 1 Core), OK |
| # hw.sensors.1=esm0, CPU 1, OK, temp, 28.00 degC / 82.40 degF |
# hw.sensors.esm0.volt1=1.66 VDC (CPU 2 Core), OK |
| hw.sensors.1:high=50C:warn.high=40C |
# hw.sensors.esm0.volt2=4.98 VDC (Motherboard +5V), OK |
| |
# hw.sensors.esm0.volt3=11.95 VDC (Motherboard +12V), OK |
| |
# hw.sensors.esm0.volt4=3.23 VDC (Motherboard +3.3V), OK |
| |
# hw.sensors.esm0.volt5=2.49 VDC (Motherboard +2.5V), OK |
| |
# hw.sensors.esm0.volt6=1.50 VDC (Motherboard GTL Term), OK |
| |
# hw.sensors.esm0.volt7=2.90 VDC (Motherboard Battery), OK |
| |
# hw.sensors.esm0.volt8=4.97 VDC (Backplane +5V), OK |
| |
# hw.sensors.esm0.volt9=12.06 VDC (Backplane +12V), OK |
| |
# hw.sensors.esm0.volt10=2.83 VDC (Backplane Board), OK |
| |
# hw.sensors.esm0.volt11=4.70 VDC (Backplane SCSI A External), OK |
| |
# hw.sensors.esm0.volt12=4.78 VDC (Backplane SCSI A Internal), OK |
| |
|
| # hw.sensors.2=esm0, CPU 2, OK, temp, 30.00 degC / 86.00 degF |
# hw.sensors.esm0.volt13=5.07 VDC (Power Supply 1 +5V) |
| hw.sensors.2:high=50C:warn.high=40C |
hw.sensors.esm0.volt13:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V |
| |
# hw.sensors.esm0.volt14=12.12 VDC (Power Supply 1 +12V) |
| |
hw.sensors.esm0.volt14: |
| |
# hw.sensors.esm0.volt15=3.32 VDC (Power Supply 1 +3.3V) |
| |
hw.sensors.esm0.volt15: |
| |
# hw.sensors.esm0.volt16=5.08 VDC (Power Supply 1 -5V) |
| |
hw.sensors.esm0.volt16: |
| |
# hw.sensors.esm0.volt17=12.20 VDC (Power Supply 1 -12V) |
| |
hw.sensors.esm0.volt17: |
| |
|
| # hw.sensors.3=esm0, Mainboard, OK, temp, 21.50 degC / 70.70 degF |
# hw.sensors.esm0.volt18=5.09 VDC (Power Supply 2 +5V) |
| hw.sensors.3:high=40C:warn.high=30C |
hw.sensors.esm0.volt18:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V |
| |
# hw.sensors.esm0.volt19=12.07 VDC (Power Supply 2 +12V) |
| |
hw.sensors.esm0.volt19: |
| |
# hw.sensors.esm0.volt20=3.34 VDC (Power Supply 2 +3.3V) |
| |
hw.sensors.esm0.volt20: |
| |
# hw.sensors.esm0.volt21=5.01 VDC (Power Supply 2 -5V) |
| |
hw.sensors.esm0.volt21: |
| |
# hw.sensors.esm0.volt22=12.03 VDC (Power Supply 2 -12V) |
| |
hw.sensors.esm0.volt22: |
| |
|
| # hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V |
# hw.sensors.esm0.volt23=5.03 VDC (Power Supply 3 +5V) |
| hw.sensors.4:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V |
hw.sensors.esm0.volt23:crit.high=5.15V:crit.low=4.85V:warn.high=5.10V:warn.low=4.9V |
| |
# hw.sensors.esm0.volt24=12.13 VDC (Power Supply 3 +12V) |
| |
hw.sensors.esm0.volt24: |
| |
# hw.sensors.esm0.volt25=3.34 VDC (Power Supply 3 +3.3V) |
| |
hw.sensors.esm0.volt25: |
| |
# hw.sensors.esm0.volt26=5.03 VDC (Power Supply 3 -5V) |
| |
hw.sensors.esm0.volt26: |
| |
# hw.sensors.esm0.volt27=11.97 VDC (Power Supply 3 -12V) |
| |
hw.sensors.esm0.volt27: |
| |
|
| # hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V |
# hw.sensors.esm0.volt28=5.02 VDC (System Power Supply +5V) |
| hw.sensors.5:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V |
hw.sensors.esm0.volt28: |
| |
# hw.sensors.esm0.volt29=12.09 VDC (System Power Supply +12V) |
| |
hw.sensors.esm0.volt29: |
| |
# hw.sensors.esm0.volt30=3.32 VDC (System Power Supply +3.3V) |
| |
hw.sensors.esm0.volt30: |
| |
# hw.sensors.esm0.volt31=4.91 VDC (System Power Supply -5V) |
| |
hw.sensors.esm0.volt31: |
| |
# hw.sensors.esm0.volt32=11.82 VDC (System Power Supply -12V) |
| |
hw.sensors.esm0.volt32: |
| |
# hw.sensors.esm0.volt33=5.16 VDC (System Power Supply +5V aux) |
| |
hw.sensors.esm0.volt33: |
| |
|
| # hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V |
# hw.sensors.esm0.current0=2.30 A (Power Supply 1 +5V), OK |
| hw.sensors.6:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V |
# hw.sensors.esm0.current1=0.90 A (Power Supply 1 +12V), OK |
| |
# hw.sensors.esm0.current2=1.50 A (Power Supply 1 +3.3V), OK |
| |
# hw.sensors.esm0.current3=1.90 A (Power Supply 2 +5V), OK |
| |
# hw.sensors.esm0.current4=0.90 A (Power Supply 2 +12V), OK |
| |
# hw.sensors.esm0.current5=1.50 A (Power Supply 2 +3.3V), OK |
| |
# hw.sensors.esm0.current6=1.30 A (Power Supply 3 +5V), OK |
| |
# hw.sensors.esm0.current7=0.90 A (Power Supply 3 +12V), OK |
| |
# hw.sensors.esm0.current8=1.50 A (Power Supply 3 +3.3V), OK |
| |
|
| # hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.94 V |
# hw.sensors.esm0.indicator0=Off (Chassis Intrusion) |
| hw.sensors.7:high=12.15V:warn.high=12.1V:low=11.8V:warn.low=11.85V |
hw.sensors.esm0.indicator0:crit=Off |
| |
# hw.sensors.esm0.indicator1=On (Backplane SCSI A Connected) |
| |
hw.sensors.esm0.indicator1:crit=On |
| |
|
| # hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V |
# hw.sensors.esm0.indicator2=On (Power Supply 1 AC) |
| hw.sensors.8:high=3.5V:warn.high=3.4V:low=3.15V:warn.low=3.2V |
hw.sensors.esm0.indicator2:crit=On |
| |
# hw.sensors.esm0.indicator3=On (Power Supply 1 SW) |
| |
hw.sensors.esm0.indicator3:crit=On |
| |
# hw.sensors.esm0.indicator4=On (Power Supply 1 OK) |
| |
hw.sensors.esm0.indicator4:crit=On |
| |
# hw.sensors.esm0.indicator5=On (Power Supply 1 ON), OK |
| |
# hw.sensors.esm0.indicator6=Off (Power Supply 1 FFAN) |
| |
hw.sensors.esm0.indicator6:crit=Off |
| |
# hw.sensors.esm0.indicator7=Off (Power Supply 1 OTMP) |
| |
hw.sensors.esm0.indicator7:crit=Off |
| |
|
| # hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V |
# hw.sensors.esm0.indicator8=On (Power Supply 2 AC) |
| hw.sensors.9:high=2.75V:warn.high=2.6V:low=2.25V:warn.low=2.4V |
hw.sensors.esm0.indicator8:crit=On |
| |
# hw.sensors.esm0.indicator9=On (Power Supply 2 SW) |
| |
hw.sensors.esm0.indicator9:crit=On |
| |
# hw.sensors.esm0.indicator10=On (Power Supply 2 OK) |
| |
hw.sensors.esm0.indicator10:crit=On |
| |
# hw.sensors.esm0.indicator11=On (Power Supply 2 ON), OK |
| |
# hw.sensors.esm0.indicator12=Off (Power Supply 2 FFAN) |
| |
hw.sensors.esm0.indicator12:crit=Off |
| |
# hw.sensors.esm0.indicator13=Off (Power Supply 2 OTMP) |
| |
hw.sensors.esm0.indicator13:crit=Off |
| |
|
| # hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V |
# hw.sensors.esm0.indicator14=On (Power Supply 3 AC) |
| hw.sensors.10:high=1.75V:warn.high=1.6V:low=1.25V:warn.low=1.4V |
hw.sensors.esm0.indicator14:crit=On |
| |
# hw.sensors.esm0.indicator15=On (Power Supply 3 SW) |
| |
hw.sensors.esm0.indicator15:crit=On |
| |
# hw.sensors.esm0.indicator16=On (Power Supply 3 OK) |
| |
hw.sensors.esm0.indicator16:crit=On |
| |
# hw.sensors.esm0.indicator17=On (Power Supply 3 ON), OK |
| |
# hw.sensors.esm0.indicator18=Off (Power Supply 3 FFAN) |
| |
hw.sensors.esm0.indicator18:crit=Off |
| |
# hw.sensors.esm0.indicator19=Off (Power Supply 3 OTMP) |
| |
hw.sensors.esm0.indicator19:crit=Off |
| |
|
| # hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.93 V |
# hw.sensors.esm0.raw0=2 (Chassis Fan Ctrl) |
| hw.sensors.11:high=3.1V:warn.high=3.05V:low=2.75V:warn.low=2.8V |
# hw.sensors.esm0.raw1=227 (Backplane Control) |
| |
# hw.sensors.esm0.raw2=8738 (Backplane Fan Control) |
| |
# hw.sensors.esm0.raw3=42498 (Fan Enclosure) |
| |
|
| # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off |
# hw.sensors.esm0.drive0=online (Drive 0) |
| hw.sensors.12:crit=Off:warn=Off |
hw.sensors.esm0.drive0:crit=online |
| |
# hw.sensors.esm0.drive1=online (Drive 1) |
| |
hw.sensors.esm0.drive1:crit=online |
| |
# hw.sensors.esm0.drive2=unknown (Drive 2) |
| |
hw.sensors.esm0.drive2:crit=unknown |
| |
# hw.sensors.esm0.drive3=unknown (Drive 3) |
| |
hw.sensors.esm0.drive3:crit=unknown |
| |
# hw.sensors.esm0.drive4=online (Drive 4) |
| |
hw.sensors.esm0.drive4:crit=online |
| |
# hw.sensors.esm0.drive5=online (Drive 5) |
| |
hw.sensors.esm0.drive5:crit=online |
| |
# hw.sensors.esm0.drive6=unknown (Drive 6) |
| |
hw.sensors.esm0.drive6:crit=unknown |
| |
# hw.sensors.esm0.drive7=unknown (Drive 7) |
| |
hw.sensors.esm0.drive7:crit=unknown |
| |
|
| # hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3526 RPM |
# hw.sensors.ami0.drive0=online (sd0), OK |
| hw.sensors.13:low=3000:warn.low=3250 |
# hw.sensors.ami0.drive1=online (sd1), OK |
| |
# hw.sensors.safte0.temp0=30.00 degC, OK |
| # hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3569 RPM |
# hw.sensors.safte0.temp1=30.00 degC, OK |
| hw.sensors.14:low=3000:warn.low=3250 |
# hw.sensors.safte0.indicator0=On (Fan0), OK |
| |
# hw.sensors.safte0.indicator1=On (Fan1), OK |
| # hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3563 RPM |
# hw.sensors.safte0.indicator2=On (Fan2), OK |
| hw.sensors.15:low=3000:warn.low=3250 |
|
| |
|
| # hw.sensors.16=esm0, Backplane, raw, 0 |
|
| # hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF |
|
| hw.sensors.17:high=35C:warn.high=25C |
|
| |
|
| # hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.00 degC / 71.60 degF |
|
| hw.sensors.18:high=40C:warn.high=30C |
|
| |
|
| # hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V |
|
| hw.sensors.19:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V |
|
| |
|
| # hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On |
|
| hw.sensors.20:crit=On:warn=On |
|
| |
|
| # hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V |
|
| hw.sensors.21:high=5.1V:warn.high=5.05V:low=4.60V:warn.low=4.65V |
|
| |
|
| # hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off |
|
| hw.sensors.22:crit=Off:warn=Off |
|
| |
|
| # hw.sensors.23=esm0, Drive 0, drive, online |
|
| hw.sensors.23:crit=online,empty:warn=online |
|
| |
|
| # hw.sensors.24=esm0, Drive 1, drive, online |
|
| hw.sensors.24:crit=online,empty:warn=online |
|
| |
|
| # hw.sensors.25=esm0, Drive 2, drive, empty |
|
| hw.sensors.25:crit=online,empty:warn=online,empty |
|
| |
|
| # hw.sensors.26=esm0, Drive 3, drive, empty |
|
| hw.sensors.26:crit=online,empty:warn=online,empty |
|
| |
|
| # hw.sensors.27=esm0, Backplane Control 2, raw, 17 |
|
| # hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V |
|
| hw.sensors.28:high=3.5V:warn.high=3.4V:low=3.2V:warn.low=3.25V |
|
| |
|
| # hw.sensors.29=safte0, temp0, OK, temp, 14.44 degC / 58.00 degF |
|
| hw.sensors.29:high=35C:warn.high=25C |
|
| |
|
| # hw.sensors.30=safte0, temp1, OK, temp, 22.22 degC / 72.00 degF |
|
| hw.sensors.30:high=40C:warn.high=30C |
|
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to sensorsd.conf CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / nagios / check_hw_sensors