| version 1.3, 2006/05/04 02:39:16 |
version 1.7, 2008/03/10 17:31:12 |
|
|
| <html><head><title>Nagios Check - check_hw_sensors</title></head>
|
<html><head><title>Nagios Check - check_hw_sensors</title></head> |
| <body>
|
<body> |
| <h1>Nagios Check - check_hw_sensors</h1>
|
<h1>Nagios Check - check_hw_sensors</h1> |
| <p>check_hw_sensors plugin for Nagios monitors sysctl hw.sensors on OpenBSD</p>
|
<p>check_hw_sensors plugin for Nagios monitors sysctl hw.sensors on OpenBSD</p> |
| <p>With the new sensor framework in OpenBSD 3.9, I wanted to be able to monitor the new hw.sensors from <a href='http://www.nagios.org/'>Nagios</a> and this is what I have. It is currently a work in progress although it does seem to work just fine. The documentation is a bit thin and I don't know how reliable it is. I would be happy to accept patches. Send them to <a href='mailto:andrew+nagios@rraz.net'>andrew+nagios@rraz.net</a>. I know the docs aren't as good as I would like, so if there are places that need clarification, please let me know!</p>
|
<p>With the new sensor framework in OpenBSD 3.9, I wanted to be able to monitor the new hw.sensors from <a href='http://www.nagios.org/'>Nagios</a> and this is what I have. The documentation is a bit thin and I don't know how reliable it is. I would be happy to accept patches. Send them to <a href='mailto:andrew+nagios@rraz.net'>andrew+nagios@rraz.net</a>. I know the docs aren't as good as I would like, so if there are places that need clarification, please let me know!</p> |
| <p>What I think is really kewl about this plugin is that it can use the same sensorsd.conf as sensorsd. That means that they can be easily kept in sync. But, since Nagios supports both warning and critical alerts, it turned out really handy that sensorsd ignores any additional capabilities in the file. The addtional capabilities check_hw_sensors supports are described below. If you have an /etc/sensorsd.conf with the checks you want, it can be run as simply as 'check_hw_sensors -f'.</p>
|
<p>New in this release is support for the new 2 level sensors in OpenBSD 4.0-current. They seem way more better, and I may change some stuff to only support that version after I get all my machines moved to 4.1.</p> |
| <p>TODO:
|
<p>They changed the output again, so 1.23 is an update to fix that.</p> |
| <ul>
|
<p>It has the ability to check the sensors that report their status. Since many sensors support this, it can make the size of your sensorsd.conf much smaller. For example, check_hw_sensors will automatically check these two sensors: |
| <li>need real documentation.</li>
|
<ul> |
| <li>the ability to check the "status" entry that is in some output. For example the OK here:<br>
|
<li>hw.sensors.76=esm0, Fan 4, 3629 RPM, OK</li> |
| hw.sensors.1=esm0, CPU 1, OK, temp, 31.00 degC / 87.80 degF</li>
|
<li>hw.sensors.77=esm0, Fan 5, 0 RPM, CRITICAL</li> |
| </ul>
|
</ul> |
| </p>
|
It will report the status listed to Nagios. For 76, it would be OK, for 77 it would be CRITICAL. You don't need to put anything in a config file to support those.</p> |
| <p><center><b><a href='check_hw_sensors-1.14.tar.gz'>Download the current version here</a></b></center></p>
|
<p>What I think is really kewl about this plugin is that it can use the same sensorsd.conf as sensorsd. That means that they can be easily kept in sync. But, since Nagios supports both warning and critical alerts, it turned out really handy that sensorsd ignores any additional capabilities in the file. The addtional capabilities check_hw_sensors supports are described below. If you have an /etc/sensorsd.conf with the checks you want, it can be run as simply as 'check_hw_sensors -f'. If you only want to check the sensors that report their status, you can ever run it as just 'check_hw_sensors'.</p> |
| <h4>
|
<p>TODO: |
| Please be sure to support the <a href="http://www.openbsd.org">OpenBSD</a>
|
<ul> |
| project by purchasing
|
<li>need real documentation.</li> |
| <a href="http://www.openbsd.org/items.html">CDs</a>,
|
<li>the RANGE using the colon to separate probably screws up the getcap of sensorsd.conf, so it should probably get replaced with a dash or somesuch</li> |
| <a href="http://www.openbsd.org/tshirts.html">T-shirts</a>, or making a
|
</ul> |
| <a href="http://www.openbsd.org/donations.html">donation</a>.
|
</p> |
| <br />
|
<p><center><b><a href='check_hw_sensors-1.25.tar.gz'>Download the current version here</a></b></center></p> |
| These finances ensure that OpenBSD will continue to exist, and
|
<h4> |
| will remain <a href="http://www.openbsd.org/policy.html">free</a>
|
Please be sure to support the <a href="http://www.openbsd.org">OpenBSD</a> |
| for everyone to use and reuse as they see fit.
|
project by purchasing |
| </h4>
|
<a href="http://www.openbsd.org/items.html">CDs</a>, |
| <pre>
|
<a href="http://www.openbsd.org/tshirts.html">T-shirts</a>, or making a |
| check_hw_sensors (-f [<FILENAME>]|(-s <hw.sensors id> -w limit -c limit))
|
<a href="http://www.openbsd.org/donations.html">donation</a>. |
|
|
<br /> |
| Usage:
|
These finances ensure that OpenBSD will continue to exist, and |
| -f, --filename=FILE
|
will remain <a href="http://www.openbsd.org/policy.html">free</a> |
| FILE to load checks from (defaults to /etc/sensorsd.conf)
|
for everyone to use and reuse as they see fit. |
| -s, --sensor=ID
|
</h4> |
| ID of a single sensor. "-s 0" means hw.sensors.0.
|
<pre> |
| -w, --warning=RANGE or single ENTRY
|
check_hw_sensors [-i] (-f [<FILENAME>]|(-s <hw.sensors id> [-w limit] [-c limit])) |
| Exit with WARNING status if outside of RANGE or if != ENTRY
|
|
| -c, --critical=RANGE or single ENTRY
|
Usage: |
| Exit with CRITICAL status if outside of RANGE or if != ENTRY
|
-i, --ignore-status |
|
|
Don't check the status of sensors that report it. |
| -h (--help) usage help
|
-f, --filename=FILE |
| </pre>
|
FILE to load checks from (defaults to /etc/sensorsd.conf) |
| <p>FILE is in the same format as <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> plus some additional entries. These additional entries in the file are ignored by <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd'>sensorsd(8)</a>. </p>
|
-s, --sensor=ID |
|
|
ID of a single sensor. "-s 0" means hw.sensors.0. |
| <p>check_hw_sensors understands the following entries:<br>
|
-w, --warning=RANGE or single ENTRY |
| low, high, crit, warn, crit.low, crit.high, warn.low, warn.high</p>
|
Exit with WARNING status if outside of RANGE or if != ENTRY |
|
|
-c, --critical=RANGE or single ENTRY |
| <p>An ENTRY depends on the type. The descriptions in <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a>
|
Exit with CRITICAL status if outside of RANGE or if != ENTRY |
| can be used when appropriate, or you can use the following:
|
</pre> |
|
|
<p>FILE is in the same format as <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> plus some additional entries. These additional entries in the file are ignored by <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd'>sensorsd(8)</a>. </p> |
| <ul>
|
|
| <li>volts_dc, fanrpm or raw<br>
|
<p>check_hw_sensors understands the following entries:<br> |
| Anything that includes digits.
|
low, high, crit, warn, crit.low, crit.high, warn.low, warn.high, |
| Both the value of the check and the value of the sensor
|
ignore, status</p> |
| response that are not either a digit or period are stripped
|
|
| and then the two resultant values are compared.</li>
|
<p>An ENTRY depends on the type. The descriptions in <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> |
|
|
can be used when appropriate, or you can use the following: |
| <li>temp<br>
|
|
| Can be as above, but if the entry has an F in it,
|
<ul> |
| it compares farenheit, otherwise it uses celcius.</li>
|
<li>fanrpm, volts_dc, amps, watthour, amphour, integer (raw), percent, lux or timedelta<br> |
|
|
Anything that includes digits. |
| <li>indicator or drive<br>
|
Both the value of the check and the value of the sensor |
| does a case sensitive match of each
|
response that are not either a digit or period are stripped |
| entry in the comma separated list and if it does not match
|
and then the two resultant values are compared.</li> |
| any of the entries, it matches the status. Does not support any low or high entries.</li>
|
|
| </ul>
|
<li>temp<br> |
|
|
Can be as above, but if the entry has an F in it, |
| <p>The entries 'crit' or 'warn' (or the -c or -w on the command line)
|
it compares farenheit, otherwise it uses celcius.</li> |
| may be a RANGE or a comma separated list of acceptable values.
|
|
| The comma separated list of values contains a list of things that
|
<li>indicator or drive<br> |
| will NOT cause the status. This is possibly counterintuitive, but
|
does a case sensitive match of each |
| you are more likely to know good values than bad values.</p>
|
entry in the comma separated list and if it does not match |
|
|
any of the entries, it sets the status.</li> |
| <p>A RANGE is a low ENTRY and a high ENTRY separated by a colon (:).
|
</ul> |
| It can also be low: or :high with the other side left blank to only
|
|
| make the single check..<p>
|
<p>The entries 'crit' or 'warn' (or the -c or -w on the command line) |
|
|
may be a RANGE or a comma separated list of acceptable values. |
| <p>check_hw_sensors (nagios-plugins 1.4.2) 1.14<br>
|
The comma separated list of values contains a list of things that |
| The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute
|
will NOT cause the status. This is possibly counterintuitive, but |
| copies of the plugins under the terms of the GNU General Public License.
|
you are more likely to know good values than bad values.</p> |
| For more information about these matters, see the file named COPYING.</p>
|
|
| <h3>Example Sensorsd.conf</h3>
|
<p>A RANGE is a low ENTRY and a high ENTRY separated by a colon (:). |
| <pre>
|
It can also be low: or :high with the other side left blank to only |
| # $OpenBSD$
|
make the single check..<p> |
| # $ RedRiver: sensorsd.conf,v 1.1 2006/05/03 21:48:42 andrew Exp $
|
|
|
|
<p>An entry marked "ignore" will cause that sensor to be skipped. |
| #
|
Generally used with status checking of all sensors to ignore sensors you |
| # Sample sensorsd.conf file. See sensorsd.conf(5) for details.
|
don't care about or that report incorrectly.</p> |
| # This one has examples for use with nagios check_hw_sensors
|
|
| # Actual sensors on a 2450 are below.
|
<p>If you are using --ignore-status, you can still check the status of |
| #
|
individual sensors with a status entry.</p> |
|
|
|
| # hw.sensors.0=esm0, Motherboard, raw, 0
|
<p>check_hw_sensors (nagios-plugins 1.4.2) 1.22<br> |
| # hw.sensors.1=esm0, CPU 1, OK, temp, 28.00 degC / 82.40 degF
|
The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute |
| hw.sensors.1:high=50C:warn.high=40C
|
copies of the plugins under the terms of the GNU General Public License. |
|
|
For more information about these matters, see the file named COPYING.</p> |
| # hw.sensors.2=esm0, CPU 2, OK, temp, 30.00 degC / 86.00 degF
|
|
| hw.sensors.2:high=50C:warn.high=40C
|
<h3>Example sensorsd.conf</h3> |
|
|
<pre> |
| # hw.sensors.3=esm0, Mainboard, OK, temp, 21.50 degC / 70.70 degF
|
# hw.sensors.acpibat0.volt0=7.40 V DC, (voltage), OK |
| hw.sensors.3:high=40C:warn.high=30C
|
# hw.sensors.acpibat0.volt1=8.30 V DC, (current voltage), OK |
|
|
# hw.sensors.acpibat0.watthour0=57.72 Wh, (last full capacity) |
| # hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V
|
# hw.sensors.acpibat0.watthour1=0.00 Wh, (warning capacity) |
| hw.sensors.4:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V
|
# hw.sensors.acpibat0.watthour2=0.12 Wh, (low capacity) |
|
|
# hw.sensors.acpibat0.watthour3=57.72 Wh, (remaining capacity) |
| # hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V
|
hw.sensors.acpibat0.watthour3:warn.low=50 Wh:crit.low=30 Wh |
| hw.sensors.5:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V
|
# hw.sensors.acpibat0.raw0=2, (battery charging), OK |
|
|
# hw.sensors.acpibat0.raw1=99, (rate) |
| # hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V
|
# hw.sensors.acpiac0.indicator0=On, (power supply) |
| hw.sensors.6:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V
|
hw.sensors.acpiac0.indicator0:crit=On |
|
|
# hw.sensors.acpitz0.temp0=62.95 degC, (zone temperature) |
| # hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.94 V
|
hw.sensors.acpitz0.temp0:warn.high=65 degC:crit.high=75 degC |
| hw.sensors.7:high=12.15V:warn.high=12.1V:low=11.8V:warn.low=11.85V
|
</pre> |
|
|
<h3>CVS log for check_hw_sensors</h3> |
| # hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V
|
<pre> |
| hw.sensors.8:high=3.5V:warn.high=3.4V:low=3.15V:warn.low=3.2V
|
RCS file: /cvs/scripts/Admin scripts/check_hw_sensors/check_hw_sensors,v |
|
|
Working file: check_hw_sensors |
| # hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V
|
head: 1.25 |
| hw.sensors.9:high=2.75V:warn.high=2.6V:low=2.25V:warn.low=2.4V
|
branch: |
|
|
locks: strict |
| # hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V
|
access list: |
| hw.sensors.10:high=1.75V:warn.high=1.6V:low=1.25V:warn.low=1.4V
|
symbolic names: |
|
|
keyword substitution: kv |
| # hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.93 V
|
total revisions: 25; selected revisions: 25 |
| hw.sensors.11:high=3.1V:warn.high=3.05V:low=2.75V:warn.low=2.8V
|
description: |
|
|
---------------------------- |
| # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
|
revision 1.25 |
| hw.sensors.12:crit=Off:warn=Off
|
date: 2008/03/10 16:21:53; author: andrew; state: Exp; lines: +5 -5 |
|
|
Fix it for sensors with more than 1 digit at the end. |
| # hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3526 RPM
|
---------------------------- |
| hw.sensors.13:low=3000:warn.low=3250
|
revision 1.24 |
|
|
date: 2007/02/14 21:59:10; author: andrew; state: Exp; lines: +5 -4 |
| # hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3569 RPM
|
Add an idea to the TODO list. |
| hw.sensors.14:low=3000:warn.low=3250
|
---------------------------- |
|
|
revision 1.23 |
| # hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3563 RPM
|
date: 2007/01/22 02:38:35; author: andrew; state: Exp; lines: +8 -5 |
| hw.sensors.15:low=3000:warn.low=3250
|
again they change the output! |
|
|
---------------------------- |
| # hw.sensors.16=esm0, Backplane, raw, 0
|
revision 1.22 |
| # hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF
|
date: 2007/01/06 03:16:41; author: andrew; state: Exp; lines: +11 -4 |
| hw.sensors.17:high=35C:warn.high=25C
|
Support the new dual level sensors |
|
|
---------------------------- |
| # hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.00 degC / 71.60 degF
|
revision 1.21 |
| hw.sensors.18:high=40C:warn.high=30C
|
date: 2006/12/05 16:26:27; author: andrew; state: Exp; lines: +5 -5 |
|
|
new better example for 4.0 |
| # hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V
|
and fix the s/drive\s// from the data, not the type |
| hw.sensors.19:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V
|
---------------------------- |
|
|
revision 1.20 |
| # hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On
|
date: 2006/12/05 00:17:47; author: andrew; state: Exp; lines: +35 -26 |
| hw.sensors.20:crit=On:warn=On
|
Match sensors differently depending on OS Version from the Config module. |
|
|
|
| # hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V
|
Also support checks on the other sensor types and document that. |
| hw.sensors.21:high=5.1V:warn.high=5.05V:low=4.60V:warn.low=4.65V
|
|
|
|
and refactor the way I return a $sensor->{'status'} from ~10 lines to 1. |
| # hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off
|
---------------------------- |
| hw.sensors.22:crit=Off:warn=Off
|
revision 1.19 |
|
|
date: 2006/12/04 23:33:53; author: andrew; state: Exp; lines: +8 -3 |
| # hw.sensors.23=esm0, Drive 0, drive, online
|
add a regex for the 'percent' type of sensor |
| hw.sensors.23:crit=online,empty:warn=online
|
---------------------------- |
|
|
revision 1.18 |
| # hw.sensors.24=esm0, Drive 1, drive, online
|
date: 2006/12/02 02:15:17; author: andrew; state: Exp; lines: +74 -9 |
| hw.sensors.24:crit=online,empty:warn=online
|
fix it for the output from OpenBSD 4.0 |
|
|
---------------------------- |
| # hw.sensors.25=esm0, Drive 2, drive, empty
|
revision 1.17 |
| hw.sensors.25:crit=online,empty:warn=online,empty
|
date: 2006/10/25 23:30:23; author: andrew; state: Exp; lines: +4 -7 |
|
|
get the docs up to match the new version |
| # hw.sensors.26=esm0, Drive 3, drive, empty
|
---------------------------- |
| hw.sensors.26:crit=online,empty:warn=online,empty
|
revision 1.16 |
|
|
date: 2006/10/25 18:36:46; author: andrew; state: Exp; lines: +4 -4 |
| # hw.sensors.27=esm0, Backplane Control 2, raw, 17
|
Stuff in CVS should output nagios format |
| # hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V
|
---------------------------- |
| hw.sensors.28:high=3.5V:warn.high=3.4V:low=3.2V:warn.low=3.25V
|
revision 1.15 |
|
|
date: 2006/10/25 18:35:59; author: andrew; state: Exp; lines: +73 -46 |
| # hw.sensors.29=safte0, temp0, OK, temp, 14.44 degC / 58.00 degF
|
add support for the status as reported by the sensors. it is teh r0x0r! |
| hw.sensors.29:high=35C:warn.high=25C
|
---------------------------- |
|
|
revision 1.14 |
| # hw.sensors.30=safte0, temp1, OK, temp, 22.22 degC / 72.00 degF
|
date: 2006/05/04 01:30:29; author: andrew; state: Exp; lines: +6 -4 |
| hw.sensors.30:high=40C:warn.high=30C
|
I thought I checked this in already |
| </pre>
|
---------------------------- |
| <h3>Example output from sysctl hw.sensors from that box</h3>
|
revision 1.13 |
| <pre>
|
date: 2006/05/03 22:16:42; author: andrew; state: Exp; lines: +7 -6 |
| hw.sensors.0=esm0, Motherboard, raw, 0
|
Some more fixing of the help |
| hw.sensors.1=esm0, CPU 1, OK, temp, 30.00 degC / 86.00 degF
|
---------------------------- |
| hw.sensors.2=esm0, CPU 2, OK, temp, 31.00 degC / 87.80 degF
|
revision 1.12 |
| hw.sensors.3=esm0, Mainboard, OK, temp, 19.50 degC / 67.10 degF
|
date: 2006/05/03 21:54:43; author: andrew; state: Exp; lines: +51 -30 |
| hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V
|
Get the help output cleaned up. Still not 100% what I want, but so far so good. |
| hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V
|
---------------------------- |
| hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V
|
revision 1.11 |
| hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.93 V
|
date: 2006/05/03 20:01:09; author: holligan; state: Exp; lines: +4 -4 |
| hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V
|
updated and clarified help |
| hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V
|
---------------------------- |
| hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V
|
revision 1.10 |
| hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.94 V
|
date: 2006/05/03 03:31:22; author: andrew; state: Exp; lines: +27 -42 |
| hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
|
A bunch of cleanup and some kewl refactoring into loops. |
| hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3514 RPM
|
|
| hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3582 RPM
|
Still need to find a way to refactor the checks that are so similar! |
| hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3570 RPM
|
---------------------------- |
| hw.sensors.16=esm0, Backplane, raw, 0
|
revision 1.9 |
| hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF
|
date: 2006/05/03 02:26:47; author: andrew; state: Exp; lines: +8 -8 |
| hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.50 degC / 72.50 degF
|
It now doesn't do nonexistent checks (for some stuff anyway) |
| hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V
|
Also changed the <br /> to <br>. Not valid XHTML whatever, but it does get stripped before getting sent to my pager. |
| hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On
|
---------------------------- |
| hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V
|
revision 1.8 |
| hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off
|
date: 2006/05/02 21:23:29; author: andrew; state: Exp; lines: +6 -16 |
| hw.sensors.23=esm0, Drive 0, drive, online
|
Better looking output for the web page. |
| hw.sensors.24=esm0, Drive 1, drive, online
|
---------------------------- |
| hw.sensors.25=esm0, Drive 2, drive, empty
|
revision 1.7 |
| hw.sensors.26=esm0, Drive 3, drive, empty
|
date: 2006/05/02 20:03:53; author: andrew; state: Exp; lines: +5 -5 |
| hw.sensors.27=esm0, Backplane Control 2, raw, 17
|
oops, that's an array ref! |
| hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V
|
---------------------------- |
| hw.sensors.29=safte0, temp0, OK, temp, 15.00 degC / 59.00 degF
|
revision 1.6 |
| hw.sensors.30=safte0, temp1, OK, temp, 22.78 degC / 73.00 degF
|
date: 2006/05/02 19:59:47; author: andrew; state: Exp; lines: +7 -5 |
| </pre>
|
Better output for the OK checks |
| <p>Andrew Fresh <<a href='mailto:andrew@mad-techies.org'>andrew@mad-techies.org</a>></p>
|
---------------------------- |
| <p><small>$RedRiver: index.html,v 1.2 2006/05/04 01:31:29 andrew Exp $</small></p>
|
revision 1.5 |
| </body>
|
date: 2006/05/02 19:49:29; author: andrew; state: Exp; lines: +19 -12 |
| </html>
|
Only show details for things other than OK, cuZ we are limited in the amount of data we can return :-( |
| |
---------------------------- |
| |
revision 1.4 |
| |
date: 2006/05/02 15:54:42; author: andrew; state: Exp; lines: +44 -21 |
| |
Some cleanup, as well as making it output a single line like nagios supposedly likes. |
| |
---------------------------- |
| |
revision 1.3 |
| |
date: 2006/05/02 01:39:23; author: andrew; state: Exp; lines: +3 -3 |
| |
fix the help getopts. |
| |
---------------------------- |
| |
revision 1.2 |
| |
date: 2006/05/02 01:29:33; author: andrew; state: Exp; lines: +427 -11 |
| |
Adding the sensors from one of the routers, cuZ there were a lot and I can use it for testing. |
| |
|
| |
Also, now the check_hw_sensors now seems to be OK. I need to put it on a few machines and set up the checks now. If it works for the rest of the week, I can clean it up and mebbe put it on teh interweb and post to undeadly. |
| |
---------------------------- |
| |
revision 1.1 |
| |
date: 2006/05/01 18:11:23; author: andrew; state: Exp; |
| |
add this so I can check it out on a box for testing |
| |
============================================================================= |
| |
</pre> |
| |
<p>Andrew Fresh <<a href='mailto:andrew@mad-techies.org'>andrew@mad-techies.org</a>></p> |
| |
<p><small>$RedRiver: index.html,v 1.6 2007/01/06 03:27:53 andrew Exp $</small></p> |
| |
</body> |
| |
</html> |
| |
|
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to index.html CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / nagios / check_hw_sensors