| version 1.1, 2006/05/04 00:50:17 |
version 1.5, 2006/12/05 16:44:14 |
|
|
| <html><head><title>Nagios Check - check_hw_sensors</title></head>
|
<html><head><title>Nagios Check - check_hw_sensors</title></head> |
| <body>
|
<body> |
| <h1>Nagios Check - check_hw_sensors</h1>
|
<h1>Nagios Check - check_hw_sensors</h1> |
| <p>check_hw_sensors plugin for Nagios monitors sysctl hw.sensors on OpenBSD</p>
|
<p>check_hw_sensors plugin for Nagios monitors sysctl hw.sensors on OpenBSD</p> |
| <p>With the new sensor framework in OpenBSD 3.9, I wanted to be able to monitor the new hw.sensors from <a href='http://www.nagios.org/'>Nagios</a> and this is what I have. It is currently a work in progress although it does seem to work just fine. The documentation is a bit thin and I don't know how reliable it is. I would be happy to accept patches. Send them to <a href='mailto:andrew+nagios@rraz.net'>andrew+nagios@rraz.net</a>. I know the docs aren't as good as I would like, so if there are places that need clarification, please let me know!</p>
|
<p>With the new sensor framework in OpenBSD 3.9, I wanted to be able to monitor the new hw.sensors from <a href='http://www.nagios.org/'>Nagios</a> and this is what I have. The documentation is a bit thin and I don't know how reliable it is. I would be happy to accept patches. Send them to <a href='mailto:andrew+nagios@rraz.net'>andrew+nagios@rraz.net</a>. I know the docs aren't as good as I would like, so if there are places that need clarification, please let me know!</p> |
| <p>What I think is really kewl about this plugin is that it can use the same sensorsd.conf as sensorsd. That means that they can be easily kept in sync. But, since Nagios supports both warning and critical alerts, it turned out really handy that sensorsd ignores any additional capabilities in the file. The addtional capabilities check_hw_sensors supports are described below. If you have an /etc/sensorsd.conf with the checks you want, it can be run as simply as 'check_hw_sensors -f'.</p>
|
<p>New in this release is support for more sensor types, as well as support for OpenBSD 4.0.</p> |
| <p><center><b><a href='check_hw_sensors-1.13.tar.gz'>Download the current version here</a></b></center></p>
|
<p>It has the ability to check the sensors that report their status. Since many sensors support this, it can make the size of your sensorsd.conf much smaller. For example, check_hw_sensors will automatically check these two sensors: |
| <h4>
|
<ul> |
| Please be sure to support the <a href="http://www.openbsd.org">OpenBSD</a>
|
<li>hw.sensors.76=esm0, Fan 4, 3629 RPM, OK</li> |
| project by purchasing
|
<li>hw.sensors.77=esm0, Fan 5, 0 RPM, CRITICAL</li> |
| <a href="http://www.openbsd.org/items.html">CDs</a>,
|
</ul> |
| <a href="http://www.openbsd.org/tshirts.html">T-shirts</a>, or making a
|
It will report the status listed to Nagios. For 76, it would be OK, for 77 it would be CRITICAL. You don't need to put anything in a config file to support those.</p> |
| <a href="http://www.openbsd.org/donations.html">donation</a>.
|
<p>What I think is really kewl about this plugin is that it can use the same sensorsd.conf as sensorsd. That means that they can be easily kept in sync. But, since Nagios supports both warning and critical alerts, it turned out really handy that sensorsd ignores any additional capabilities in the file. The addtional capabilities check_hw_sensors supports are described below. If you have an /etc/sensorsd.conf with the checks you want, it can be run as simply as 'check_hw_sensors -f'. If you only want to check the sensors that report their status, you can ever run it as just 'check_hw_sensors'.</p> |
| <br />
|
<p>TODO: |
| These finances ensure that OpenBSD will continue to exist, and
|
<ul> |
| will remain <a href="http://www.openbsd.org/policy.html">free</a>
|
<li>need real documentation.</li> |
| for everyone to use and reuse as they see fit.
|
<li>the RANGE using the colon to separate probably screws up the getcap of sensorsd.conf, so it should probably get replaced with a dash or somesuch</li> |
| </h4>
|
</ul> |
| <pre>
|
</p> |
| check_hw_sensors (-f [<FILENAME>]|(-s <hw.sensors id> -w limit -c limit))
|
<p><center><b><a href='check_hw_sensors-1.21.tar.gz'>Download the current version here</a></b></center></p> |
|
|
<h4> |
| Usage:
|
Please be sure to support the <a href="http://www.openbsd.org">OpenBSD</a> |
| -f, --filename=FILE
|
project by purchasing |
| FILE to load checks from (defaults to /etc/sensorsd.conf)
|
<a href="http://www.openbsd.org/items.html">CDs</a>, |
| -s, --sensor=ID
|
<a href="http://www.openbsd.org/tshirts.html">T-shirts</a>, or making a |
| ID of a single sensor. "-s 0" means hw.sensors.0.
|
<a href="http://www.openbsd.org/donations.html">donation</a>. |
| -w, --warning=RANGE or single ENTRY
|
<br /> |
| Exit with WARNING status if outside of RANGE or if != ENTRY
|
These finances ensure that OpenBSD will continue to exist, and |
| -c, --critical=RANGE or single ENTRY
|
will remain <a href="http://www.openbsd.org/policy.html">free</a> |
| Exit with CRITICAL status if outside of RANGE or if != ENTRY
|
for everyone to use and reuse as they see fit. |
|
|
</h4> |
| -h (--help) usage help
|
<pre> |
| </pre>
|
check_hw_sensors [-i] (-f [<FILENAME>]|(-s <hw.sensors id> [-w limit] [-c limit])) |
| <p>FILE is in the same format as <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> plus some additional entries. These additional entries in the file are ignored by <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd'>sensorsd(8)</a>. </p>
|
|
|
|
Usage: |
| <p>check_hw_sensors understands the following entries:<br>
|
-i, --ignore-status |
| low, high, crit, warn, crit.low, crit.high, warn.low, warn.high</p>
|
Don't check the status of sensors that report it. |
|
|
-f, --filename=FILE |
| <p>An ENTRY depends on the type. The descriptions in <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a>
|
FILE to load checks from (defaults to /etc/sensorsd.conf) |
| can be used when appropriate, or you can use the following:
|
-s, --sensor=ID |
|
|
ID of a single sensor. "-s 0" means hw.sensors.0. |
| <ul>
|
-w, --warning=RANGE or single ENTRY |
| <li>volts_dc, fanrpm or raw<br>
|
Exit with WARNING status if outside of RANGE or if != ENTRY |
| Anything that includes digits.
|
-c, --critical=RANGE or single ENTRY |
| Both the value of the check and the value of the sensor
|
Exit with CRITICAL status if outside of RANGE or if != ENTRY |
| response that are not either a digit or period are stripped
|
</pre> |
| and then the two resultant values are compared.</li>
|
<p>FILE is in the same format as <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> plus some additional entries. These additional entries in the file are ignored by <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd'>sensorsd(8)</a>. </p> |
|
|
|
| <li>temp<br>
|
<p>check_hw_sensors understands the following entries:<br> |
| Can be as above, but if the entry has an F in it,
|
low, high, crit, warn, crit.low, crit.high, warn.low, warn.high, |
| it compares farenheit, otherwise it uses celcius.</li>
|
ignore, status</p> |
|
|
|
| <li>indicator or drive<br>
|
<p>An ENTRY depends on the type. The descriptions in <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> |
| does a case sensitive match of each
|
can be used when appropriate, or you can use the following: |
| entry in the comma separated list and if it does not match
|
|
| any of the entries, it matches the status. Does not support any low or high entries.</li>
|
<ul> |
| </ul>
|
<li>fanrpm, volts_dc, amps, watthour, amphour, integer (raw), percent, lux or timedelta<br> |
|
|
Anything that includes digits. |
| <p>The entries 'crit' or 'warn' (or the -c or -w on the command line)
|
Both the value of the check and the value of the sensor |
| may be a RANGE or a comma separated list of acceptable values.
|
response that are not either a digit or period are stripped |
| The comma separated list of values contains a list of things that
|
and then the two resultant values are compared.</li> |
| will NOT cause the status. This is possibly counterintuitive, but
|
|
| you are more likely to know good values than bad values.</p>
|
<li>temp<br> |
|
|
Can be as above, but if the entry has an F in it, |
| <p>A RANGE is a low ENTRY and a high ENTRY separated by a colon (:).
|
it compares farenheit, otherwise it uses celcius.</li> |
| It can also be low: or :high with the other side left blank to only
|
|
| make the single check..<p>
|
<li>indicator or drive<br> |
|
|
does a case sensitive match of each |
| <p>check_hw_sensors (nagios-plugins 1.4.2) 1.13<br>
|
entry in the comma separated list and if it does not match |
| The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute
|
any of the entries, it sets the status.</li> |
| copies of the plugins under the terms of the GNU General Public License.
|
</ul> |
| For more information about these matters, see the file named COPYING.</p>
|
|
| <h3>Example Sensorsd.conf</h3>
|
<p>The entries 'crit' or 'warn' (or the -c or -w on the command line) |
| <pre>
|
may be a RANGE or a comma separated list of acceptable values. |
| # $OpenBSD$
|
The comma separated list of values contains a list of things that |
| # $ RedRiver: sensorsd.conf,v 1.1 2006/05/03 21:48:42 andrew Exp $
|
will NOT cause the status. This is possibly counterintuitive, but |
|
|
you are more likely to know good values than bad values.</p> |
| #
|
|
| # Sample sensorsd.conf file. See sensorsd.conf(5) for details.
|
<p>A RANGE is a low ENTRY and a high ENTRY separated by a colon (:). |
| # This one has examples for use with nagios check_hw_sensors
|
It can also be low: or :high with the other side left blank to only |
| # Actual sensors on a 2450 are below.
|
make the single check..<p> |
| #
|
|
|
|
<p>An entry marked "ignore" will cause that sensor to be skipped. |
| # hw.sensors.0=esm0, Motherboard, raw, 0
|
Generally used with status checking of all sensors to ignore sensors you |
| # hw.sensors.1=esm0, CPU 1, OK, temp, 28.00 degC / 82.40 degF
|
don't care about or that report incorrectly.</p> |
| hw.sensors.1:high=50C:warn.high=40C
|
|
|
|
<p>If you are using --ignore-status, you can still check the status of |
| # hw.sensors.2=esm0, CPU 2, OK, temp, 30.00 degC / 86.00 degF
|
individual sensors with a status entry.</p> |
| hw.sensors.2:high=50C:warn.high=40C
|
|
|
|
<p>check_hw_sensors (nagios-plugins 1.4.2) 1.21<br> |
| # hw.sensors.3=esm0, Mainboard, OK, temp, 21.50 degC / 70.70 degF
|
The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute |
| hw.sensors.3:high=40C:warn.high=30C
|
copies of the plugins under the terms of the GNU General Public License. |
|
|
For more information about these matters, see the file named COPYING.</p> |
| # hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V
|
|
| hw.sensors.4:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V
|
<h3>Example sensorsd.conf</h3> |
|
|
<pre> |
| # hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V
|
# hw.sensors.0=esm0, CPU 1, 39.00 degC, OK |
| hw.sensors.5:high=1.85V:warn.high=1.8V:low=1.60V:warn.low=1.65V
|
# hw.sensors.1=esm0, CPU 2, 37.00 degC, OK |
|
|
# hw.sensors.2=esm0, Mainboard, 29.50 degC, OK |
| # hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V
|
# hw.sensors.3=esm0, CPU 1 Core, 1.74 V DC, OK |
| hw.sensors.6:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V
|
# hw.sensors.4=esm0, CPU 2 Core, 1.73 V DC, OK |
|
|
# hw.sensors.5=esm0, Motherboard +5V, 4.94 V DC, OK |
| # hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.94 V
|
# hw.sensors.6=esm0, Motherboard +12V, 11.90 V DC, OK |
| hw.sensors.7:high=12.15V:warn.high=12.1V:low=11.8V:warn.low=11.85V
|
# hw.sensors.7=esm0, Motherboard +3.3V, 3.22 V DC, OK |
|
|
# hw.sensors.8=esm0, Motherboard +2.5V, 2.49 V DC, OK |
| # hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V
|
# hw.sensors.9=esm0, Motherboard GTL Term, 1.49 V DC, OK |
| hw.sensors.8:high=3.5V:warn.high=3.4V:low=3.15V:warn.low=3.2V
|
# hw.sensors.10=esm0, Motherboard Battery, 2.98 V DC, OK |
|
|
# hw.sensors.11=esm0, Chassis Intrusion, Off |
| # hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V
|
hw.sensors.11:crit=Off |
| hw.sensors.9:high=2.75V:warn.high=2.6V:low=2.25V:warn.low=2.4V
|
# hw.sensors.12=esm0, Fan 1, 3586 RPM, OK |
|
|
# hw.sensors.13=esm0, Fan 2, 3539 RPM, OK |
| # hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V
|
# hw.sensors.14=esm0, Fan 3, 3536 RPM, OK |
| hw.sensors.10:high=1.75V:warn.high=1.6V:low=1.25V:warn.low=1.4V
|
# hw.sensors.15=esm0, Backplane, 0 raw |
|
|
# hw.sensors.16=esm0, Backplane Top, 28.00 degC, OK |
| # hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.93 V
|
# hw.sensors.17=esm0, Backplane Bottom, 30.50 degC, OK |
| hw.sensors.11:high=3.1V:warn.high=3.05V:low=2.75V:warn.low=2.8V
|
# hw.sensors.18=esm0, Backplane +5V, 4.94 V DC, OK |
|
|
# hw.sensors.19=esm0, Backplane +12V, 11.81 V DC, OK |
| # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
|
# hw.sensors.20=esm0, Backplane SCSI A Connected, On |
| hw.sensors.12:crit=Off:warn=Off
|
hw.sensors.20:crit=On |
|
|
# hw.sensors.21=esm0, Backplane SCSI A External, 4.61 V DC, OK |
| # hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3526 RPM
|
# hw.sensors.22=esm0, Backplane SCSI B Connected, Off |
| hw.sensors.13:low=3000:warn.low=3250
|
# hw.sensors.23=esm0, Drive 0, drive online |
|
|
hw.sensors.23:crit=online |
| # hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3569 RPM
|
# hw.sensors.24=esm0, Drive 1, drive online |
| hw.sensors.14:low=3000:warn.low=3250
|
hw.sensors.24:crit=online |
|
|
# hw.sensors.25=esm0, Drive 2, drive online |
| # hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3563 RPM
|
hw.sensors.25:crit=online |
| hw.sensors.15:low=3000:warn.low=3250
|
# hw.sensors.26=esm0, Drive 3, drive online |
|
|
hw.sensors.26:crit=online |
| # hw.sensors.16=esm0, Backplane, raw, 0
|
# hw.sensors.27=esm0, Drive 4, drive online |
| # hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF
|
hw.sensors.27:crit=online |
| hw.sensors.17:high=35C:warn.high=25C
|
# hw.sensors.28=esm0, Backplane Control 2, 1 raw |
|
|
# hw.sensors.29=esm0, Backplane +3.3V, 3.28 V DC, OK |
| # hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.00 degC / 71.60 degF
|
# hw.sensors.30=ami0, sd0, drive online, OK |
| hw.sensors.18:high=40C:warn.high=30C
|
# hw.sensors.31=ami0, sd1, drive online, OK |
|
|
# hw.sensors.32=safte0, Temp0, 27.78 degC, OK |
| # hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V
|
# hw.sensors.33=safte0, Temp1, 30.56 degC, OK |
| hw.sensors.19:high=5.1V:warn.high=5.05V:low=4.90V:warn.low=4.85V
|
</pre> |
|
|
<h3>CVS log for check_hw_sensors</h3> |
| # hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On
|
<pre> |
| hw.sensors.20:crit=On:warn=On
|
RCS file: /cvs/scripts/Admin scripts/check_hw_sensors/check_hw_sensors,v |
|
|
Working file: check_hw_sensors |
| # hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V
|
head: 1.21 |
| hw.sensors.21:high=5.1V:warn.high=5.05V:low=4.60V:warn.low=4.65V
|
branch: |
|
|
locks: strict |
| # hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off
|
access list: |
| hw.sensors.22:crit=Off:warn=Off
|
symbolic names: |
|
|
keyword substitution: kv |
| # hw.sensors.23=esm0, Drive 0, drive, online
|
total revisions: 21; selected revisions: 21 |
| hw.sensors.23:crit=online,empty:warn=online
|
description: |
|
|
---------------------------- |
| # hw.sensors.24=esm0, Drive 1, drive, online
|
revision 1.21 |
| hw.sensors.24:crit=online,empty:warn=online
|
date: 2006/12/05 16:26:27; author: andrew; state: Exp; lines: +5 -5 |
|
|
new better example for 4.0 |
| # hw.sensors.25=esm0, Drive 2, drive, empty
|
and fix the s/drive\s// from the data, not the type |
| hw.sensors.25:crit=online,empty:warn=online,empty
|
---------------------------- |
|
|
revision 1.20 |
| # hw.sensors.26=esm0, Drive 3, drive, empty
|
date: 2006/12/05 00:17:47; author: andrew; state: Exp; lines: +35 -26 |
| hw.sensors.26:crit=online,empty:warn=online,empty
|
Match sensors differently depending on OS Version from the Config module. |
|
|
|
| # hw.sensors.27=esm0, Backplane Control 2, raw, 17
|
Also support checks on the other sensor types and document that. |
| # hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V
|
|
| hw.sensors.28:high=3.5V:warn.high=3.4V:low=3.2V:warn.low=3.25V
|
and refactor the way I return a $sensor->{'status'} from ~10 lines to 1. |
|
|
---------------------------- |
| # hw.sensors.29=safte0, temp0, OK, temp, 14.44 degC / 58.00 degF
|
revision 1.19 |
| hw.sensors.29:high=35C:warn.high=25C
|
date: 2006/12/04 23:33:53; author: andrew; state: Exp; lines: +8 -3 |
|
|
add a regex for the 'percent' type of sensor |
| # hw.sensors.30=safte0, temp1, OK, temp, 22.22 degC / 72.00 degF
|
---------------------------- |
| hw.sensors.30:high=40C:warn.high=30C
|
revision 1.18 |
| </pre>
|
date: 2006/12/02 02:15:17; author: andrew; state: Exp; lines: +74 -9 |
| <h3>Example output from sysctl hw.sensors from that box</h3>
|
fix it for the output from OpenBSD 4.0 |
| <pre>
|
---------------------------- |
| hw.sensors.0=esm0, Motherboard, raw, 0
|
revision 1.17 |
| hw.sensors.1=esm0, CPU 1, OK, temp, 30.00 degC / 86.00 degF
|
date: 2006/10/25 23:30:23; author: andrew; state: Exp; lines: +4 -7 |
| hw.sensors.2=esm0, CPU 2, OK, temp, 31.00 degC / 87.80 degF
|
get the docs up to match the new version |
| hw.sensors.3=esm0, Mainboard, OK, temp, 19.50 degC / 67.10 degF
|
---------------------------- |
| hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.69 V
|
revision 1.16 |
| hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.70 V
|
date: 2006/10/25 18:36:46; author: andrew; state: Exp; lines: +4 -4 |
| hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.95 V
|
Stuff in CVS should output nagios format |
| hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.93 V
|
---------------------------- |
| hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.27 V
|
revision 1.15 |
| hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.48 V
|
date: 2006/10/25 18:35:59; author: andrew; state: Exp; lines: +73 -46 |
| hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.49 V
|
add support for the status as reported by the sensors. it is teh r0x0r! |
| hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.94 V
|
---------------------------- |
| hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
|
revision 1.14 |
| hw.sensors.13=esm0, Fan 1, OK, fanrpm, 3514 RPM
|
date: 2006/05/04 01:30:29; author: andrew; state: Exp; lines: +6 -4 |
| hw.sensors.14=esm0, Fan 2, OK, fanrpm, 3582 RPM
|
I thought I checked this in already |
| hw.sensors.15=esm0, Fan 3, OK, fanrpm, 3570 RPM
|
---------------------------- |
| hw.sensors.16=esm0, Backplane, raw, 0
|
revision 1.13 |
| hw.sensors.17=esm0, Backplane Top, OK, temp, 14.50 degC / 58.10 degF
|
date: 2006/05/03 22:16:42; author: andrew; state: Exp; lines: +7 -6 |
| hw.sensors.18=esm0, Backplane Bottom, OK, temp, 22.50 degC / 72.50 degF
|
Some more fixing of the help |
| hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V
|
---------------------------- |
| hw.sensors.20=esm0, Backplane SCSI A Connected, indicator, On
|
revision 1.12 |
| hw.sensors.21=esm0, Backplane SCSI A External, OK, volts_dc, 4.70 V
|
date: 2006/05/03 21:54:43; author: andrew; state: Exp; lines: +51 -30 |
| hw.sensors.22=esm0, Backplane SCSI B Connected, indicator, Off
|
Get the help output cleaned up. Still not 100% what I want, but so far so good. |
| hw.sensors.23=esm0, Drive 0, drive, online
|
---------------------------- |
| hw.sensors.24=esm0, Drive 1, drive, online
|
revision 1.11 |
| hw.sensors.25=esm0, Drive 2, drive, empty
|
date: 2006/05/03 20:01:09; author: holligan; state: Exp; lines: +4 -4 |
| hw.sensors.26=esm0, Drive 3, drive, empty
|
updated and clarified help |
| hw.sensors.27=esm0, Backplane Control 2, raw, 17
|
---------------------------- |
| hw.sensors.28=esm0, Backplane +3.3V, OK, volts_dc, 3.28 V
|
revision 1.10 |
| hw.sensors.29=safte0, temp0, OK, temp, 15.00 degC / 59.00 degF
|
date: 2006/05/03 03:31:22; author: andrew; state: Exp; lines: +27 -42 |
| hw.sensors.30=safte0, temp1, OK, temp, 22.78 degC / 73.00 degF
|
A bunch of cleanup and some kewl refactoring into loops. |
| </pre>
|
|
| <p>Andrew Fresh <<a href='mailto:andrew@mad-techies.org'>andrew@mad-techies.org</a>></p>
|
Still need to find a way to refactor the checks that are so similar! |
| <p><small>$RedRiver$</small></p>
|
---------------------------- |
| </body>
|
revision 1.9 |
| </html>
|
date: 2006/05/03 02:26:47; author: andrew; state: Exp; lines: +8 -8 |
| |
It now doesn't do nonexistent checks (for some stuff anyway) |
| |
Also changed the <br /> to <br>. Not valid XHTML whatever, but it does get stripped before getting sent to my pager. |
| |
---------------------------- |
| |
revision 1.8 |
| |
date: 2006/05/02 21:23:29; author: andrew; state: Exp; lines: +6 -16 |
| |
Better looking output for the web page. |
| |
---------------------------- |
| |
revision 1.7 |
| |
date: 2006/05/02 20:03:53; author: andrew; state: Exp; lines: +5 -5 |
| |
oops, that's an array ref! |
| |
---------------------------- |
| |
revision 1.6 |
| |
date: 2006/05/02 19:59:47; author: andrew; state: Exp; lines: +7 -5 |
| |
Better output for the OK checks |
| |
---------------------------- |
| |
revision 1.5 |
| |
date: 2006/05/02 19:49:29; author: andrew; state: Exp; lines: +19 -12 |
| |
Only show details for things other than OK, cuZ we are limited in the amount of data we can return :-( |
| |
---------------------------- |
| |
revision 1.4 |
| |
date: 2006/05/02 15:54:42; author: andrew; state: Exp; lines: +44 -21 |
| |
Some cleanup, as well as making it output a single line like nagios supposedly likes. |
| |
---------------------------- |
| |
revision 1.3 |
| |
date: 2006/05/02 01:39:23; author: andrew; state: Exp; lines: +3 -3 |
| |
fix the help getopts. |
| |
---------------------------- |
| |
revision 1.2 |
| |
date: 2006/05/02 01:29:33; author: andrew; state: Exp; lines: +427 -11 |
| |
Adding the sensors from one of the routers, cuZ there were a lot and I can use it for testing. |
| |
|
| |
Also, now the check_hw_sensors now seems to be OK. I need to put it on a few machines and set up the checks now. If it works for the rest of the week, I can clean it up and mebbe put it on teh interweb and post to undeadly. |
| |
---------------------------- |
| |
revision 1.1 |
| |
date: 2006/05/01 18:11:23; author: andrew; state: Exp; |
| |
add this so I can check it out on a box for testing |
| |
============================================================================= |
| |
</pre> |
| |
<p>Andrew Fresh <<a href='mailto:andrew@mad-techies.org'>andrew@mad-techies.org</a>></p> |
| |
<p><small>$RedRiver: index.html,v 1.4 2006/10/25 23:30:23 andrew Exp $</small></p> |
| |
</body> |
| |
</html> |
| |
|
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to index.html CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / nagios / check_hw_sensors