| version 1.4, 2006/10/26 00:30:23 |
version 1.6, 2007/01/06 03:27:53 |
|
|
| <html><head><title>Nagios Check - check_hw_sensors</title></head>
|
<html><head><title>Nagios Check - check_hw_sensors</title></head> |
| <body>
|
<body> |
| <h1>Nagios Check - check_hw_sensors</h1>
|
<h1>Nagios Check - check_hw_sensors</h1> |
| <p>check_hw_sensors plugin for Nagios monitors sysctl hw.sensors on OpenBSD</p>
|
<p>check_hw_sensors plugin for Nagios monitors sysctl hw.sensors on OpenBSD</p> |
| <p>With the new sensor framework in OpenBSD 3.9, I wanted to be able to monitor the new hw.sensors from <a href='http://www.nagios.org/'>Nagios</a> and this is what I have. The documentation is a bit thin and I don't know how reliable it is. I would be happy to accept patches. Send them to <a href='mailto:andrew+nagios@rraz.net'>andrew+nagios@rraz.net</a>. I know the docs aren't as good as I would like, so if there are places that need clarification, please let me know!</p>
|
<p>With the new sensor framework in OpenBSD 3.9, I wanted to be able to monitor the new hw.sensors from <a href='http://www.nagios.org/'>Nagios</a> and this is what I have. The documentation is a bit thin and I don't know how reliable it is. I would be happy to accept patches. Send them to <a href='mailto:andrew+nagios@rraz.net'>andrew+nagios@rraz.net</a>. I know the docs aren't as good as I would like, so if there are places that need clarification, please let me know!</p> |
| <p>New in this release is the ability to check the sensors that report their status. Since many sensors support this, it can make the size of your sensorsd.conf much smaller. For example, check_hw_sensors will automatically check these two sensors:
|
<p>New in this release is support for the new 2 level sensors in OpenBSD 4.0-current. They seem way more better, and I may change some stuff to only support that version after I get all my machines moved to 4.1</p> |
| <ul>
|
<p>It has the ability to check the sensors that report their status. Since many sensors support this, it can make the size of your sensorsd.conf much smaller. For example, check_hw_sensors will automatically check these two sensors: |
| <li>hw.sensors.76=esm0, Fan 4, OK, fanrpm, 3629 RPM</li>
|
<ul> |
| <li>hw.sensors.77=esm0, Fan 5, CRITICAL, fanrpm, 0 RPM</li>
|
<li>hw.sensors.76=esm0, Fan 4, 3629 RPM, OK</li> |
| </ul>
|
<li>hw.sensors.77=esm0, Fan 5, 0 RPM, CRITICAL</li> |
| It will report the status listed to Nagios. For 76, it would be OK, for 77 it would be CRITICAL. You don't need to put anything in a config file to support those.</p>
|
</ul> |
| <p>What I think is really kewl about this plugin is that it can use the same sensorsd.conf as sensorsd. That means that they can be easily kept in sync. But, since Nagios supports both warning and critical alerts, it turned out really handy that sensorsd ignores any additional capabilities in the file. The addtional capabilities check_hw_sensors supports are described below. If you have an /etc/sensorsd.conf with the checks you want, it can be run as simply as 'check_hw_sensors -f'. If you only want to check the sensors that report their status, you can ever run it as just 'check_hw_sensors'.</p>
|
It will report the status listed to Nagios. For 76, it would be OK, for 77 it would be CRITICAL. You don't need to put anything in a config file to support those.</p> |
| <p>TODO:
|
<p>What I think is really kewl about this plugin is that it can use the same sensorsd.conf as sensorsd. That means that they can be easily kept in sync. But, since Nagios supports both warning and critical alerts, it turned out really handy that sensorsd ignores any additional capabilities in the file. The addtional capabilities check_hw_sensors supports are described below. If you have an /etc/sensorsd.conf with the checks you want, it can be run as simply as 'check_hw_sensors -f'. If you only want to check the sensors that report their status, you can ever run it as just 'check_hw_sensors'.</p> |
| <ul>
|
<p>TODO: |
| <li>need real documentation.</li>
|
<ul> |
| <li>the RANGE using the colon to separate probably screws up the getcap of sensorsd.conf, so it should probably get replaced with a dash or somesuch</li>
|
<li>need real documentation.</li> |
| </ul>
|
<li>the RANGE using the colon to separate probably screws up the getcap of sensorsd.conf, so it should probably get replaced with a dash or somesuch</li> |
| </p>
|
</ul> |
| <p><center><b><a href='check_hw_sensors-1.17.tar.gz'>Download the current version here</a></b></center></p>
|
</p> |
| <h4>
|
<p><center><b><a href='check_hw_sensors-1.22.tar.gz'>Download the current version here</a></b></center></p> |
| Please be sure to support the <a href="http://www.openbsd.org">OpenBSD</a>
|
<h4> |
| project by purchasing
|
Please be sure to support the <a href="http://www.openbsd.org">OpenBSD</a> |
| <a href="http://www.openbsd.org/items.html">CDs</a>,
|
project by purchasing |
| <a href="http://www.openbsd.org/tshirts.html">T-shirts</a>, or making a
|
<a href="http://www.openbsd.org/items.html">CDs</a>, |
| <a href="http://www.openbsd.org/donations.html">donation</a>.
|
<a href="http://www.openbsd.org/tshirts.html">T-shirts</a>, or making a |
| <br />
|
<a href="http://www.openbsd.org/donations.html">donation</a>. |
| These finances ensure that OpenBSD will continue to exist, and
|
<br /> |
| will remain <a href="http://www.openbsd.org/policy.html">free</a>
|
These finances ensure that OpenBSD will continue to exist, and |
| for everyone to use and reuse as they see fit.
|
will remain <a href="http://www.openbsd.org/policy.html">free</a> |
| </h4>
|
for everyone to use and reuse as they see fit. |
| <pre>
|
</h4> |
| check_hw_sensors [-i] (-f [<FILENAME>]|(-s <hw.sensors id> [-w limit] [-c limit]))
|
<pre> |
|
|
check_hw_sensors [-i] (-f [<FILENAME>]|(-s <hw.sensors id> [-w limit] [-c limit])) |
| Usage:
|
|
| -i, --ignore-status
|
Usage: |
| Don't check the status of sensors that report it.
|
-i, --ignore-status |
| -f, --filename=FILE
|
Don't check the status of sensors that report it. |
| FILE to load checks from (defaults to /etc/sensorsd.conf)
|
-f, --filename=FILE |
| -s, --sensor=ID
|
FILE to load checks from (defaults to /etc/sensorsd.conf) |
| ID of a single sensor. "-s 0" means hw.sensors.0.
|
-s, --sensor=ID |
| -w, --warning=RANGE or single ENTRY
|
ID of a single sensor. "-s 0" means hw.sensors.0. |
| Exit with WARNING status if outside of RANGE or if != ENTRY
|
-w, --warning=RANGE or single ENTRY |
| -c, --critical=RANGE or single ENTRY
|
Exit with WARNING status if outside of RANGE or if != ENTRY |
| Exit with CRITICAL status if outside of RANGE or if != ENTRY
|
-c, --critical=RANGE or single ENTRY |
| </pre>
|
Exit with CRITICAL status if outside of RANGE or if != ENTRY |
| <p>FILE is in the same format as <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> plus some additional entries. These additional entries in the file are ignored by <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd'>sensorsd(8)</a>. </p>
|
</pre> |
|
|
<p>FILE is in the same format as <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> plus some additional entries. These additional entries in the file are ignored by <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd'>sensorsd(8)</a>. </p> |
| <p>check_hw_sensors understands the following entries:<br>
|
|
| low, high, crit, warn, crit.low, crit.high, warn.low, warn.high,
|
<p>check_hw_sensors understands the following entries:<br> |
| ignore, status</p>
|
low, high, crit, warn, crit.low, crit.high, warn.low, warn.high, |
|
|
ignore, status</p> |
| <p>An ENTRY depends on the type. The descriptions in <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a>
|
|
| can be used when appropriate, or you can use the following:
|
<p>An ENTRY depends on the type. The descriptions in <a href='http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.conf'>sensorsd.conf(5)</a> |
|
|
can be used when appropriate, or you can use the following: |
| <ul>
|
|
| <li>volts_dc, fanrpm or raw<br>
|
<ul> |
| Anything that includes digits.
|
<li>fanrpm, volts_dc, amps, watthour, amphour, integer (raw), percent, lux or timedelta<br> |
| Both the value of the check and the value of the sensor
|
Anything that includes digits. |
| response that are not either a digit or period are stripped
|
Both the value of the check and the value of the sensor |
| and then the two resultant values are compared.</li>
|
response that are not either a digit or period are stripped |
|
|
and then the two resultant values are compared.</li> |
| <li>temp<br>
|
|
| Can be as above, but if the entry has an F in it,
|
<li>temp<br> |
| it compares farenheit, otherwise it uses celcius.</li>
|
Can be as above, but if the entry has an F in it, |
|
|
it compares farenheit, otherwise it uses celcius.</li> |
| <li>indicator or drive<br>
|
|
| does a case sensitive match of each
|
<li>indicator or drive<br> |
| entry in the comma separated list and if it does not match
|
does a case sensitive match of each |
| any of the entries, it matches the status. Does not support any low or high entries.</li>
|
entry in the comma separated list and if it does not match |
| </ul>
|
any of the entries, it sets the status.</li> |
|
|
</ul> |
| <p>The entries 'crit' or 'warn' (or the -c or -w on the command line)
|
|
| may be a RANGE or a comma separated list of acceptable values.
|
<p>The entries 'crit' or 'warn' (or the -c or -w on the command line) |
| The comma separated list of values contains a list of things that
|
may be a RANGE or a comma separated list of acceptable values. |
| will NOT cause the status. This is possibly counterintuitive, but
|
The comma separated list of values contains a list of things that |
| you are more likely to know good values than bad values.</p>
|
will NOT cause the status. This is possibly counterintuitive, but |
|
|
you are more likely to know good values than bad values.</p> |
| <p>A RANGE is a low ENTRY and a high ENTRY separated by a colon (:).
|
|
| It can also be low: or :high with the other side left blank to only
|
<p>A RANGE is a low ENTRY and a high ENTRY separated by a colon (:). |
| make the single check..<p>
|
It can also be low: or :high with the other side left blank to only |
|
|
make the single check..<p> |
| <p>An entry marked "ignore" will cause that sensor to be skipped.
|
|
| Generally used with status checking of all sensors to ignore sensors you
|
<p>An entry marked "ignore" will cause that sensor to be skipped. |
| don't care about or that report incorrectly.</p>
|
Generally used with status checking of all sensors to ignore sensors you |
|
|
don't care about or that report incorrectly.</p> |
| <p>If you are using --ignore-status, you can still check the status of
|
|
| individual sensors with a status entry.</p>
|
<p>If you are using --ignore-status, you can still check the status of |
|
|
individual sensors with a status entry.</p> |
| <p>check_hw_sensors (nagios-plugins 1.4.2) 1.17<br>
|
|
| The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute
|
<p>check_hw_sensors (nagios-plugins 1.4.2) 1.22<br> |
| copies of the plugins under the terms of the GNU General Public License.
|
The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute |
| For more information about these matters, see the file named COPYING.</p>
|
copies of the plugins under the terms of the GNU General Public License. |
|
|
For more information about these matters, see the file named COPYING.</p> |
| <h3>Example sensorsd.conf</h3>
|
|
| <pre>
|
<h3>Example sensorsd.conf</h3> |
| # hw.sensors.3=esm0, Ambient, OK, temp, 21.50 degC / 70.70 degF
|
<pre> |
| hw.sensors.3:high=28C:warn.high=25C
|
# hw.sensors.acpibat0.volt0=7.40 V DC, (voltage), OK |
|
|
# hw.sensors.acpibat0.volt1=8.30 V DC, (current voltage), OK |
| # hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
|
# hw.sensors.acpibat0.watthour0=57.72 Wh, (last full capacity) |
| hw.sensors.12:warn=Off
|
# hw.sensors.acpibat0.watthour1=0.00 Wh, (warning capacity) |
|
|
# hw.sensors.acpibat0.watthour2=0.12 Wh, (low capacity) |
| # hw.sensors.29=esm0, Drive 0, drive, online
|
# hw.sensors.acpibat0.watthour3=57.72 Wh, (remaining capacity) |
| hw.sensors.29:crit=online
|
hw.sensors.acpibat0.watthour3:warn.low=50 Wh:crit.low=30 Wh |
| # hw.sensors.30=esm0, Drive 1, drive, online
|
# hw.sensors.acpibat0.raw0=2, (battery charging), OK |
| hw.sensors.30:crit=online
|
# hw.sensors.acpibat0.raw1=99, (rate) |
| # hw.sensors.31=esm0, Drive 2, drive, unknown
|
# hw.sensors.acpiac0.indicator0=On, (power supply) |
| # hw.sensors.32=esm0, Drive 3, drive, unknown
|
hw.sensors.acpiac0.indicator0:crit=On |
| # hw.sensors.33=esm0, Drive 4, drive, online
|
# hw.sensors.acpitz0.temp0=62.95 degC, (zone temperature) |
| hw.sensors.33:crit=online
|
hw.sensors.acpitz0.temp0:warn.high=65 degC:crit.high=75 degC |
| # hw.sensors.34=esm0, Drive 5, drive, online
|
</pre> |
| hw.sensors.34:crit=online
|
<h3>CVS log for check_hw_sensors</h3> |
| # hw.sensors.35=esm0, Drive 6, drive, unknown
|
<pre> |
| # hw.sensors.36=esm0, Drive 7, drive, unknown
|
RCS file: /cvs/scripts/Admin scripts/check_hw_sensors/check_hw_sensors,v |
|
|
Working file: check_hw_sensors |
| # hw.sensors.70=esm0, Power Supply 1 AC, indicator, On
|
head: 1.22 |
| hw.sensors.70:crit=On
|
branch: |
| # hw.sensors.71=esm0, Power Supply 1 SW, indicator, On
|
locks: strict |
| hw.sensors.71:crit=On
|
access list: |
| # hw.sensors.72=esm0, Power Supply 1 OK, indicator, On
|
symbolic names: |
| hw.sensors.72:crit=On
|
keyword substitution: kv |
| # hw.sensors.74=esm0, Power Supply 1 FFAN, indicator, Off
|
total revisions: 22; selected revisions: 22 |
| hw.sensors.74:crit=Off
|
description: |
| # hw.sensors.75=esm0, Power Supply 1 OTMP, indicator, Off
|
---------------------------- |
| hw.sensors.75:crit=Off
|
revision 1.22 |
|
|
date: 2007/01/06 03:16:41; author: andrew; state: Exp; lines: +11 -4 |
| # hw.sensors.76=esm0, Power Supply 2 AC, indicator, On
|
Support the new dual level sensors |
| hw.sensors.76:crit=On
|
---------------------------- |
| # hw.sensors.77=esm0, Power Supply 2 SW, indicator, On
|
revision 1.21 |
| hw.sensors.77:crit=On
|
date: 2006/12/05 16:26:27; author: andrew; state: Exp; lines: +5 -5 |
| # hw.sensors.78=esm0, Power Supply 2 OK, indicator, On
|
new better example for 4.0 |
| hw.sensors.78:crit=On
|
and fix the s/drive\s// from the data, not the type |
| # hw.sensors.80=esm0, Power Supply 2 FFAN, indicator, Off
|
---------------------------- |
| hw.sensors.80:crit=Off
|
revision 1.20 |
| # hw.sensors.81=esm0, Power Supply 2 OTMP, indicator, Off
|
date: 2006/12/05 00:17:47; author: andrew; state: Exp; lines: +35 -26 |
| hw.sensors.81:crit=Off
|
Match sensors differently depending on OS Version from the Config module. |
|
|
|
| # hw.sensors.82=esm0, Power Supply 3 AC, indicator, On
|
Also support checks on the other sensor types and document that. |
| hw.sensors.82:crit=On
|
|
| # hw.sensors.83=esm0, Power Supply 3 SW, indicator, On
|
and refactor the way I return a $sensor->{'status'} from ~10 lines to 1. |
| hw.sensors.83:crit=On
|
---------------------------- |
| # hw.sensors.84=esm0, Power Supply 3 OK, indicator, On
|
revision 1.19 |
| hw.sensors.84:crit=On
|
date: 2006/12/04 23:33:53; author: andrew; state: Exp; lines: +8 -3 |
| # hw.sensors.86=esm0, Power Supply 3 FFAN, indicator, Off
|
add a regex for the 'percent' type of sensor |
| hw.sensors.86:crit=Off
|
---------------------------- |
| # hw.sensors.87=esm0, Power Supply 3 OTMP, indicator, Off
|
revision 1.18 |
| hw.sensors.87:crit=Off
|
date: 2006/12/02 02:15:17; author: andrew; state: Exp; lines: +74 -9 |
|
|
fix it for the output from OpenBSD 4.0 |
| # hw.sensors.88=esm0, Fan 1, CRITICAL, fanrpm, 0 RPM
|
---------------------------- |
| hw.sensors.88:ignore
|
revision 1.17 |
| # hw.sensors.89=esm0, Fan 2, CRITICAL, fanrpm, 0 RPM
|
date: 2006/10/25 23:30:23; author: andrew; state: Exp; lines: +4 -7 |
| hw.sensors.89:ignore
|
get the docs up to match the new version |
| # hw.sensors.90=esm0, Fan 3, CRITICAL, fanrpm, 0 RPM
|
---------------------------- |
| hw.sensors.90:ignore
|
revision 1.16 |
| # hw.sensors.91=esm0, Fan 4, CRITICAL, fanrpm, 0 RPM
|
date: 2006/10/25 18:36:46; author: andrew; state: Exp; lines: +4 -4 |
| hw.sensors.91:ignore
|
Stuff in CVS should output nagios format |
| # hw.sensors.92=esm0, Fan 5, CRITICAL, fanrpm, 0 RPM
|
---------------------------- |
| hw.sensors.92:ignore
|
revision 1.15 |
| # hw.sensors.93=esm0, Fan 6, CRITICAL, fanrpm, 0 RPM
|
date: 2006/10/25 18:35:59; author: andrew; state: Exp; lines: +73 -46 |
| hw.sensors.93:ignore
|
add support for the status as reported by the sensors. it is teh r0x0r! |
| </pre>
|
---------------------------- |
| <h3>Example output from sysctl hw.sensors from that box</h3>
|
revision 1.14 |
| <pre>
|
date: 2006/05/04 01:30:29; author: andrew; state: Exp; lines: +6 -4 |
| hw.sensors.0=esm0, CPU 1, OK, temp, 36.00 degC / 96.80 degF
|
I thought I checked this in already |
| hw.sensors.1=esm0, CPU 2, OK, temp, 41.00 degC / 105.80 degF
|
---------------------------- |
| hw.sensors.2=esm0, Mainboard, OK, temp, 28.00 degC / 82.40 degF
|
revision 1.13 |
| hw.sensors.3=esm0, Ambient, OK, temp, 21.50 degC / 70.70 degF
|
date: 2006/05/03 22:16:42; author: andrew; state: Exp; lines: +7 -6 |
| hw.sensors.4=esm0, CPU 1 Core, OK, volts_dc, 1.65 V
|
Some more fixing of the help |
| hw.sensors.5=esm0, CPU 2 Core, OK, volts_dc, 1.67 V
|
---------------------------- |
| hw.sensors.6=esm0, Motherboard +5V, OK, volts_dc, 4.98 V
|
revision 1.12 |
| hw.sensors.7=esm0, Motherboard +12V, OK, volts_dc, 11.97 V
|
date: 2006/05/03 21:54:43; author: andrew; state: Exp; lines: +51 -30 |
| hw.sensors.8=esm0, Motherboard +3.3V, OK, volts_dc, 3.25 V
|
Get the help output cleaned up. Still not 100% what I want, but so far so good. |
| hw.sensors.9=esm0, Motherboard +2.5V, OK, volts_dc, 2.49 V
|
---------------------------- |
| hw.sensors.10=esm0, Motherboard GTL Term, OK, volts_dc, 1.50 V
|
revision 1.11 |
| hw.sensors.11=esm0, Motherboard Battery, OK, volts_dc, 2.92 V
|
date: 2006/05/03 20:01:09; author: holligan; state: Exp; lines: +4 -4 |
| hw.sensors.12=esm0, Chassis Intrusion, indicator, Off
|
updated and clarified help |
| hw.sensors.13=esm0, Chassis Fan Ctrl, raw, 2
|
---------------------------- |
| hw.sensors.14=esm0, Fan 1, OK, fanrpm, 3839 RPM
|
revision 1.10 |
| hw.sensors.15=esm0, Fan 2, OK, fanrpm, 4040 RPM
|
date: 2006/05/03 03:31:22; author: andrew; state: Exp; lines: +27 -42 |
| hw.sensors.16=esm0, Backplane Control, raw, 227
|
A bunch of cleanup and some kewl refactoring into loops. |
| hw.sensors.17=esm0, Backplane Top, OK, temp, 30.00 degC / 86.00 degF
|
|
| hw.sensors.18=esm0, Backplane Bottom, OK, temp, 29.50 degC / 85.10 degF
|
Still need to find a way to refactor the checks that are so similar! |
| hw.sensors.19=esm0, Backplane +5V, OK, volts_dc, 4.97 V
|
---------------------------- |
| hw.sensors.20=esm0, Backplane +12V, OK, volts_dc, 12.06 V
|
revision 1.9 |
| hw.sensors.21=esm0, Backplane Board, OK, volts_dc, 2.83 V
|
date: 2006/05/03 02:26:47; author: andrew; state: Exp; lines: +8 -8 |
| hw.sensors.22=esm0, Backplane Fan Control, raw, 8738
|
It now doesn't do nonexistent checks (for some stuff anyway) |
| hw.sensors.23=esm0, Backplane Fan 1, OK, fanrpm, 3690 RPM
|
Also changed the <br /> to <br>. Not valid XHTML whatever, but it does get stripped before getting sent to my pager. |
| hw.sensors.24=esm0, Backplane Fan 2, OK, fanrpm, 3552 RPM
|
---------------------------- |
| hw.sensors.25=esm0, Backplane Fan 3, OK, fanrpm, 3505 RPM
|
revision 1.8 |
| hw.sensors.26=esm0, Backplane SCSI A Connected, indicator, On
|
date: 2006/05/02 21:23:29; author: andrew; state: Exp; lines: +6 -16 |
| hw.sensors.27=esm0, Backplane SCSI A External, OK, volts_dc, 4.68 V
|
Better looking output for the web page. |
| hw.sensors.28=esm0, Backplane SCSI A Internal, OK, volts_dc, 4.79 V
|
---------------------------- |
| hw.sensors.29=esm0, Drive 0, drive, online
|
revision 1.7 |
| hw.sensors.30=esm0, Drive 1, drive, online
|
date: 2006/05/02 20:03:53; author: andrew; state: Exp; lines: +5 -5 |
| hw.sensors.31=esm0, Drive 2, drive, unknown
|
oops, that's an array ref! |
| hw.sensors.32=esm0, Drive 3, drive, unknown
|
---------------------------- |
| hw.sensors.33=esm0, Drive 4, drive, online
|
revision 1.6 |
| hw.sensors.34=esm0, Drive 5, drive, online
|
date: 2006/05/02 19:59:47; author: andrew; state: Exp; lines: +7 -5 |
| hw.sensors.35=esm0, Drive 6, drive, unknown
|
Better output for the OK checks |
| hw.sensors.36=esm0, Drive 7, drive, unknown
|
---------------------------- |
| hw.sensors.37=esm0, Power Supply 1 +5V, volts_dc, 5.07 V
|
revision 1.5 |
| hw.sensors.38=esm0, Power Supply 1 +12V, volts_dc, 12.13 V
|
date: 2006/05/02 19:49:29; author: andrew; state: Exp; lines: +19 -12 |
| hw.sensors.39=esm0, Power Supply 1 +3.3V, volts_dc, 3.32 V
|
Only show details for things other than OK, cuZ we are limited in the amount of data we can return :-( |
| hw.sensors.40=esm0, Power Supply 1 -5V, volts_dc, 5.08 V
|
---------------------------- |
| hw.sensors.41=esm0, Power Supply 1 -12V, volts_dc, 12.20 V
|
revision 1.4 |
| hw.sensors.42=esm0, Power Supply 2 +5V, volts_dc, 5.09 V
|
date: 2006/05/02 15:54:42; author: andrew; state: Exp; lines: +44 -21 |
| hw.sensors.43=esm0, Power Supply 2 +12V, volts_dc, 12.08 V
|
Some cleanup, as well as making it output a single line like nagios supposedly likes. |
| hw.sensors.44=esm0, Power Supply 2 +3.3V, volts_dc, 3.34 V
|
---------------------------- |
| hw.sensors.45=esm0, Power Supply 2 -5V, volts_dc, 5.01 V
|
revision 1.3 |
| hw.sensors.46=esm0, Power Supply 2 -12V, volts_dc, 12.03 V
|
date: 2006/05/02 01:39:23; author: andrew; state: Exp; lines: +3 -3 |
| hw.sensors.47=esm0, Power Supply 3 +5V, volts_dc, 5.03 V
|
fix the help getopts. |
| hw.sensors.48=esm0, Power Supply 3 +12V, volts_dc, 12.15 V
|
---------------------------- |
| hw.sensors.49=esm0, Power Supply 3 +3.3V, volts_dc, 3.34 V
|
revision 1.2 |
| hw.sensors.50=esm0, Power Supply 3 -5V, volts_dc, 5.03 V
|
date: 2006/05/02 01:29:33; author: andrew; state: Exp; lines: +427 -11 |
| hw.sensors.51=esm0, Power Supply 3 -12V, volts_dc, 11.97 V
|
Adding the sensors from one of the routers, cuZ there were a lot and I can use it for testing. |
| hw.sensors.52=esm0, System Power Supply +5V, volts_dc, 5.02 V
|
|
| hw.sensors.53=esm0, System Power Supply +12V, volts_dc, 12.09 V
|
Also, now the check_hw_sensors now seems to be OK. I need to put it on a few machines and set up the checks now. If it works for the rest of the week, I can clean it up and mebbe put it on teh interweb and post to undeadly. |
| hw.sensors.54=esm0, System Power Supply +3.3V, volts_dc, 3.32 V
|
---------------------------- |
| hw.sensors.55=esm0, System Power Supply -5V, volts_dc, 4.91 V
|
revision 1.1 |
| hw.sensors.56=esm0, System Power Supply -12V, volts_dc, 11.82 V
|
date: 2006/05/01 18:11:23; author: andrew; state: Exp; |
| hw.sensors.57=esm0, System Power Supply +5V aux, volts_dc, 5.16 V
|
add this so I can check it out on a box for testing |
| hw.sensors.58=esm0, Power Supply 1 +5V, OK, amps, 2.40 A
|
============================================================================= |
| hw.sensors.59=esm0, Power Supply 1 +12V, OK, amps, 1.00 A
|
</pre> |
| hw.sensors.60=esm0, Power Supply 1 +3.3V, OK, amps, 1.80 A
|
<p>Andrew Fresh <<a href='mailto:andrew@mad-techies.org'>andrew@mad-techies.org</a>></p> |
| hw.sensors.61=esm0, Power Supply 2 +5V, OK, amps, 2.80 A
|
<p><small>$RedRiver: index.html,v 1.5 2006/12/05 16:44:14 andrew Exp $</small></p> |
| hw.sensors.62=esm0, Power Supply 2 +12V, OK, amps, 1.20 A
|
</body> |
| hw.sensors.63=esm0, Power Supply 2 +3.3V, OK, amps, 1.60 A
|
</html> |
| hw.sensors.64=esm0, Power Supply 3 +5V, OK, amps, 1.20 A
|
|
| hw.sensors.65=esm0, Power Supply 3 +12V, OK, amps, 1.00 A
|
|
| hw.sensors.66=esm0, Power Supply 3 +3.3V, OK, amps, 1.60 A
|
|
| hw.sensors.67=esm0, Power Supply 1 Fan, OK, fanrpm, 3726 RPM
|
|
| hw.sensors.68=esm0, Power Supply 2 Fan, OK, fanrpm, 4042 RPM
|
|
| hw.sensors.69=esm0, Power Supply 3 Fan, OK, fanrpm, 3606 RPM
|
|
| hw.sensors.70=esm0, Power Supply 1 AC, indicator, On
|
|
| hw.sensors.71=esm0, Power Supply 1 SW, indicator, On
|
|
| hw.sensors.72=esm0, Power Supply 1 OK, indicator, On
|
|
| hw.sensors.73=esm0, Power Supply 1 ON, OK, indicator, On
|
|
| hw.sensors.74=esm0, Power Supply 1 FFAN, indicator, Off
|
|
| hw.sensors.75=esm0, Power Supply 1 OTMP, indicator, Off
|
|
| hw.sensors.76=esm0, Power Supply 2 AC, indicator, On
|
|
| hw.sensors.77=esm0, Power Supply 2 SW, indicator, On
|
|
| hw.sensors.78=esm0, Power Supply 2 OK, indicator, On
|
|
| hw.sensors.79=esm0, Power Supply 2 ON, OK, indicator, On
|
|
| hw.sensors.80=esm0, Power Supply 2 FFAN, indicator, Off
|
|
| hw.sensors.81=esm0, Power Supply 2 OTMP, indicator, Off
|
|
| hw.sensors.82=esm0, Power Supply 3 AC, indicator, On
|
|
| hw.sensors.83=esm0, Power Supply 3 SW, indicator, On
|
|
| hw.sensors.84=esm0, Power Supply 3 OK, indicator, On
|
|
| hw.sensors.85=esm0, Power Supply 3 ON, OK, indicator, On
|
|
| hw.sensors.86=esm0, Power Supply 3 FFAN, indicator, Off
|
|
| hw.sensors.87=esm0, Power Supply 3 OTMP, indicator, Off
|
|
| hw.sensors.88=esm0, Fan 1, CRITICAL, fanrpm, 0 RPM
|
|
| hw.sensors.89=esm0, Fan 2, CRITICAL, fanrpm, 0 RPM
|
|
| hw.sensors.90=esm0, Fan 3, CRITICAL, fanrpm, 0 RPM
|
|
| hw.sensors.91=esm0, Fan 4, CRITICAL, fanrpm, 0 RPM
|
|
| hw.sensors.92=esm0, Fan 5, CRITICAL, fanrpm, 0 RPM
|
|
| hw.sensors.93=esm0, Fan 6, CRITICAL, fanrpm, 0 RPM
|
|
| hw.sensors.94=esm0, Fan Enclosure, raw, 42498
|
|
| hw.sensors.95=safte0, fan0, OK, indicator, On
|
|
| hw.sensors.96=safte0, fan1, OK, indicator, On
|
|
| hw.sensors.97=safte0, fan2, OK, indicator, On
|
|
| hw.sensors.98=safte0, temp0, OK, temp, 30.00 degC / 86.00 degF
|
|
| hw.sensors.99=safte0, temp1, OK, temp, 29.44 degC / 85.00 degF
|
|
| </pre>
|
|
| <p>Andrew Fresh <<a href='mailto:andrew@mad-techies.org'>andrew@mad-techies.org</a>></p>
|
|
| <p><small>$RedRiver: index.html,v 1.3 2006/05/04 01:39:16 andrew Exp $</small></p>
|
|
| </body>
|
|
| </html>
|
|
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to index.html CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / nagios / check_hw_sensors