===================================================================
RCS file: /cvs/nagios/check_bioctl/README,v
retrieving revision 1.3
retrieving revision 1.7
diff -u -r1.3 -r1.7
--- nagios/check_bioctl/README	2009/11/09 20:02:14	1.3
+++ nagios/check_bioctl/README	2017/02/08 16:31:55	1.7
@@ -1,23 +1,26 @@
 check_bioctl - checks status of a RAID array using bioctl
 
-This is check for OpenBSD machines with bioctl(8) supported RAID cards.
+This check is for OpenBSD machines with bioctl(8) supported RAID cards.
 
 The only real caveat with it is that bioctl needs rw permission to
 /dev/bio. One way to allow for that is by adding an entry to
-/etc/sudoers and then making the check run sudo check_bioctl.
+/etc/doas.conf.
 
 This is an example of a setup for NRPE. For checks on the machine running
-Nagios, use the _nagios user in /etc/sudoers instead of _nrpe, and of course,
-no ${SYSCONFDIR}/nrpe.cfg.
+Nagios, use the _nagios user in /etc/doas.conf instead of _nrpe, and of course,
+no ${SYSCONFDIR}/nrpe.cfg. check_bioctl runs bioctl once for each device, so
+you will need a doas.conf entry that matches each device you wish to check. If
+you have multiple RAID volumes, you'll need one permit rules per volume.
 
-/etc/sudoers:
-_nrpe ALL = NOPASSWD:${PREFIX}/libexec/nagios/check_bioctl -d ami0
+/etc/doas.conf:
+permit nopass _nrpe as root cmd /sbin/bioctl args ami0
+permit nopass _nrpe as root cmd /sbin/bioctl args ami1
 
-/etc/nrpe.cfg:
-command[check_bioctl]=/usr/bin/sudo ${PREFIX}/libexec/nagios/check_bioctl -d ami0
+${SYSCONFDIR}/nrpe.cfg:
+command[check_bioctl]=${PREFIX}/libexec/nagios/check_bioctl -d ami0 -d ami1
 
 For more information on bioctl(8) see the OpenBSD man page.
 
-http://www.openbsd.org
+https://www.openbsd.org
 
-$RedRiver: README,v 1.2 2009/11/09 18:37:07 andrew Exp $
+$AFresh1: README,v 1.6 2014/06/27 18:59:56 andrew Exp $